How to start/enable  BSP after upgrade

Hi
We recently did upgrade our system from 4.6 to WAS 620.
now after the upgrade is done I want to start using BSP applications. But when I try to connect to the URL I just get a Connection refused error message in the browser.
So I figure I have to activate or config the system to enable BSP ?  I need some info or tips on how to do just that.
Best regards Sigurdur

Hello Sigurdur,
start Transaction SICF and activate service tree with a right click on the server.
Regards
Gregor

Similar Messages

  • How to start LR CC after upgrade from LR 5 during trial

    I have a trial version of LR 5 for a week now and downloaded the LR CC upgrade yesterday. The LR CC app does not start. After asking if I want to continue my trial for another 23 days it just disappears without opening any library. I have tried uninstalling LR 5 completely, starting from the library with "Open WIth" also. How can I continue my trial on LR CC?
    I am on a Mac with OSX Yosemite.

    I have a trial version of LR 5 for a week now and downloaded the LR CC upgrade yesterday. The LR CC app does not start. After asking if I want to continue my trial for another 23 days it just disappears without opening any library. I have tried uninstalling LR 5 completely, starting from the library with "Open WIth" also. How can I continue my trial on LR CC?
    I am on a Mac with OSX Yosemite.

  • How to start with BSP

    Hi
    I am Vijay and i'm new to BSP.
    I want to know how to start with BSP and what kind of questions i can expext in interviews on BSP ...!

    Welcome to SDN.
    best place ot start learning BSPs is
    http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
    Regards
    Raja

  • How to start a thread after the execution/termination of another thread.???

    Hello,
    How to start a thread after the execution/termination of another thread....???
    For example:
    consider two threads: ThreadA and ThreadB
    I could start the ThreadB after the execution of ThreadA.
    How to identify the termination of one thread.....???
    Please help me...
    Thanks & Regards,
    Kayalvizhi

    What do you mean with "it doesn't work"? Do you get a compiler error? Do you get an exception at runtime? What's the error message?
    Jesper

  • How  to start with bsp's

    i'm new to bussiness server pages, how to start with it.
    how to create a bsp application and work with it.

    hi phani,
    to start creating a bsp application,
    first go to se80 tcode, there select 'bsp application' category and create a new application.
    now you can start creating your first bsp application.
    use the following link for it :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
    plz reward if useful.

  • Iphone 5 has started powering down after upgrade to 7.02, help please.

    My iPhone 5 started powering down after the 7.02 upgrade I did almost a week ago (3 times).  I realize now that it starts after I see a message notification on the home screen and click on the slider to enter my passcode and reply to the message.
    I never get the chance to enter my passcode and the phone turns itself off. The only way I can bring it back is to connect it to my Mac and launch iTunes.  Then it reboots itself and behaves normally for 2 days.
    Any ideas are appreciated.
    Thanks.

    Hi AimanBms,
    If you are having issues with your iPhone restarting unexpectedly, you may find the following article helpful:
    iOS: Device unexpectedly restarts, displays Apple logo, or powers off
    http://support.apple.com/kb/TS5356
    Regards,
    - Brenden

  • How to recover "Recovered Items" after upgrade to Mavericks

    After upgrading to Mavericks (from Mountain Lion), I had to create a new user.
    Then, after logging in, I noticed my Applications and users were missing.
    After some searching in the Terminal, it seems all the items are in "Recovered Items". It's as if the upgrade process failed to put the items back in their place after installing the new OS version.
    How do I get the system to "recover" this?

    Ok I talked to support earlier and I went into my recovered files folder and you should have Applications, Library, Users (shortcut to Users) and if you go to Users, you should see your previous User folder with all of the documents, pictures and such in it! What I had to do is create a new account (admin account) in Users & Groups using the same name for the user directory as your previous one! It should say there is there already a folder under that name and you will want to tell it that you want to use those files! Once that is done, logout, login to your new account and your stuff should be there! Pretty much all you have to do is drag what applications you want from recovered files application folder to your new application folder and of course renter your keys! Your iTunes, iPhoto and Apple products should grab all your previous stuff!

  • HT4623 How to restore contacts list after upgrading to iOS 7.2

    How do I restore the contacts list I had on my iPhone 4 after upgrading to iOS7.2? The folder is completely empty/ Thanks

    The iphone is designed to be synced to your computer or cloud service regularly.  Your contacts will be in whatever program/service that you have selected to sync.
    If you have failed to sync them to your computer or cloud service, then they are gone.

  • Can't start any program after upgrading to Mavericks from Mountain Lion.

    After upgrading my Macbook Pro from Mountain Lion to Mavericks, I can't start any program from the dock or finder.  The screen flashes briefly gray, then returns to the desktop.  I repairded permissions from the recovery partition.

    No need to repair permissions from the recovery partition. You can do that using the Disk Utility app located in HD > Applications > Utilities.
    As for the issues with your Mac. Check to see if the startup disk needs reparing. (not the same as permissions)
    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utillities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to acces the built in utilities in  OS X Recovery
    Make sure to back up all important files first before using OS X Recovery.

  • How to uninstall Lightroom 5 after upgrading to Lightroom 6?

    After upgrading to Lightroom 6, uninstall is unavailable for Lightroom 5 in CC. how to fix it?

    Hi There,
    As you have already uninstalled lightroom from Utilities>uninstallers, here is what you need to do.
    Kindly remove Lightroom 5 that you see in Applications > Move it to Trash.
    Manually uninstall Lightroom
    Make sure you Back up a catalog
    Try to install Lightroom 6/cc after relaunching Creative Cloud app.
    Thanks,
    Atul Saini

  • Error Starting Certificate Authority after upgrading in place from Server 2003 Enterprise (32 bit) to Server 2008 Enterprise (32 bit).

    Hope this is the place to seek help with Active Directory Certificate Services.  We recently upgraded in place an issuing CA in our lab from 2003 to 2008 and the upgrade of the OS was successful but the CA service now will not start. 
    The error is:
    Error 0xc8000222 (ESE: -546)
    More info.  We did stop the CA service prior to doing the upgrade.

    Answering my own question with the hopes to help someone else. 
    The problem has something to do with the logs for the certificate database.  There is some sort of a format conflict after upgrading to 2008.
    To get around this error, and get the Certificate Authority service to start, remove all the logs from the C:\Windows\system32\CertLog directory that should be where your .edb database file lives, leave the database file there
    This worked for us on three of four of our CA servers, the other one had a database that went down in a dirty state, so we had to use ESEUTIL utility to fix the database.
    NOTE: there is no ESEUTIL utility on the CA servers, so we had to copy our database to an Exchange server in our test lab, then run ESEUTIL /MH to see what the Status is, it may say Dirty or Clean, then we ran ESEUTIL / P (P for Repair, go figure I know
    right) anyway that fixed the database, so we copied it back over to the CA and started the service
    hope this helps some of you out, we have a case opened with Microsoft Technical Support on this issue and will update this thread with their feedback as well once they get back to us (it has been a week already)

  • How to start free trial after download in photoshop

    i have downloaded the Free trial version of photoshop but i have no idea how to start doing work with the free trial.  Help????

    If you're using an older computer & operating system, you might be able to download a free-trial of CS6 instead. Just be sure to follow the VERY IMPORTANT INSTRUCTIONS. 
    CS6 Direct Downloads
    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    CS6 Suite's Tech Specs
    http://prodesigntools.com/products/adobe-cs6-system-requirements.html
    Once your product(s) are installed on your computer, you launch them the same way you launch any software, via the desktop shortcut or from Program Files (win) or Applications folder (mac).
    Nancy O.

  • How to change table defnition after upgrade from 9 to 10 ?

    after upgrade from 9 to 10, tables ddl still like 9i:
    .................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
    ................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
    Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
    Thanks

    What do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
    One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
    HTH
    Aman....

  • How do I restore iTunes after upgrading to Lion?

    Upgraded from Snow Leopard to Lion and, in the process, appear to have lost access to my iTunes.  After the upgrade, when I clicked on the iTunes icon, I was then asked if I wanted to "install iTunes!"  I have found folders that appear to contain the contents, but really don't want to re-build my iTunes from scratch.
    How can I reclaim my iTunes??  Great thanks in advance!

    This is getting confusing.
    First, there is iTunes the application.  That should open no matter what, even if it opens to a blank library.
    Second, there are all the library contents (what's in your iTunes folder) which should also open when you start iTunes and present you with what you're used to seeing.
    It seems to me that it is your application that isn't starting (and so the comment about replacing with your backup doesn't apply).  Is this correct?  If so, I personally don't have the answer since I don't run Lion and don't know it's insallation procedure.  I thought iTunes application was part of the OS for Lion and should be automatically installed.  Maybe you do need to say yes when it asks you if you want to install it.
    I am assuming you did a complete backup of your hard drive before upgrading to a new OS, so in case it did actually wipe out your library (which it should not have) you can get all your files back?

  • [Solved] SystemD, how to start a service after network is up.

    Hello,
    I'm recently involved to set up a daemon which should be ready after boot (aria2). Then it fails, as it fails minidlna as well.
    The reason is that they try to come up but there's no host to talk to. See this page.
    For my purposes, it should be good when the daemons find the necessary to stay alive (even they won't have a network fully ready, that may happen in less than a minute later). For minidlna is needed a valid IP which could be 127.0.0.1 or localhost, for aria2 it may be same or just looking for a RPC binding.
    This what the logs are telling me.
    I was trying to set more dependencies in the service, but even to set
    After=wpa_supplicant.service
    it doesn't have effect.
    I don't find a solution, as far as my knowledge spans. Another chance would take to set a systemD timer and when that will be gone to start the daemon. Sorry but I don't know much about that.
    Looking for someone here to guide to right direction.
    TIA
    Last edited by TheSaint (2013-07-15 03:12:37)

    WonderWoofy wrote:It depends on what network management utility you use and therefore also how you connect.  If you are using an ethernet connection, you could just use dhcpcd@<interface>.service.  This is a very simple service, and the network.target will not be reached until the IP address and connectivity is established.
    Meanwhile some good suggestion (like yours) came up, I've tried a couple of recipes. But  dhcpcd.service didn't get it right. Maybe dhcpcd@<interface>.service, would work, I'll see later.
    I got this working:
    [Unit]
    Description=aria2 Service
    Requires=network.target
    After=dhcpcd.service
    [Service]
    Type=forking
    User=aria2
    Group=aria2
    EnvironmentFile=/etc/conf.d/aria2.conf
    WorkingDirectory=/var/aria2
    ExecStart=/usr/bin/aria2c $ARIACMD
    ExecReload=/usr/bin/kill -HUP $MAINPID
    RestartSec=1min
    Restart=on-failure
    [Install]
    WantedBy=multi-user.target
    You may note the After=dhcpcd.service, but it doesn't work. I found RestartSec=1min ,Restart=on-failure more effective and perhaps less blocking to wait for the network to be ready. As a server this  should be a small issue, very seldom compared with the running time. We (family members) can accept a little wait for the service to be on.
    Exactly I don't know which of the two is the right solution, maybe the delay is the right one.
    I was doing a cron scheduled job, before using systemd  boot, which was kicking minidlna every 5 minutes, since it was dieing often. I didn't discover what was the reason.
    I think I'll have to study another recipe which sets up a timer and keep an eye on these two services, for the long term service. But even cron would suffice, I think.
    WonderWoofy wrote:if you are using wireless, the only two real solutions would be to use netctl@<profile>.service, which too won't reach the network.target until a conplete connection is made
    Yes I'm on wireless network and the interface plugged on USB . My intent should go beyond any particular configuration. Maybe because I'd like to show a working setup, which may fit for all configuration (90 % )
    I have to admit that the actual solution do not care much whether the network is found, so I hope to get a smarter setup that counts on the necessary tools before try something. However it's proved that they fail when no connection to the router is done. But I'm preferring that they succeed. 
    WonderWoofy wrote: NetworkManager gets around this by implementing an additional service called (unimaginatively) NetworkManager-wait-online.service, which is pulled in automatically when you enable NetowrkManager.service.
    As I stated above I'm expecting a solution that won't pull in so much dependencies. Even NM is my connection manager, on the server.
    WonderWoofy wrote:
    You probably also want to use Requisite=aria2c.service on the minidlna.service as well.  This too means that it will be started after aria2c, but that it will not start at all if it is not running or fails.
    Additionally, you could try using the Requisite configuration on the minidnla, while setting the aria2c to restart itself on failure.  So that it will keep trying, and once it does, then minidlna will start.
    looks like a dog biting the tail . It's much preferable a separated failure, just in case.
    WonderWoofy wrote:Edit: Also, it is not SystemD.  It is systemd (like other "daemon" binaries in *nix).
    I'm quite sure I saw it somewhere, none of my inventions
    Last edited by TheSaint (2013-07-13 07:10:33)

Maybe you are looking for