How to start Enterprise manager 10g Linux?

To,
Can some one please tell me
How to start Enterprise manager 10g on Linux RHEL 4.7
Thanks,

Hi
While runniing $ sh emctl start dbconsole getting error of Enveromment variable ORACLE_SID not Defined
Can you pls tell me Where do i fine env file to source the ENV file Enterprise manager 10g
Also do i need to run the *$ sh emctl start dbconsole* command from GUI of Linux.
Actualy follwoing is my exact stetup
I have installed Oracle EBS 11.5.10.2 on Linux EHEL 4.7
On the same Linux Box ( Where Oracle EBS 11.5.10.2 is installed ) Installed Oracle Application and Infra. server and Discoverer
Please guide me on the same.
Thanks,

Similar Messages

How to start enterprise manager on Linux?

I installed 8.1.6 client tools, including OEM, on my Linux box. My problem is that I can't figure out how to start it. I searched through a lot of documentation and books but I still don't see it is mentioned anywhere. Can any body help me on this?
Thanks.

hi , xu lifeng:
have we met us about a month ago in the xi dan tu shu da sha?
cause some one asked me the same question
Dong

How to start Enterprise Manager Server on Linux

I install successful oracle 9i on redhat 7.2 Linux ,but I don't know how to start Enterprise Manager Server on Linux ,please help me ,thanks!

oemctrl start oms
oemctrl status oms sysman/oem_temp
oemctrl stop oms sysman/oem_temp

When I try to start Enterprise Manager 10g after I rename the machine.

OS is Sun Solaris and Oracle version is 10.2.0.1 .
Renaming the machine, I can't start Enterprise Manager by type "emctl start dbconsole" but system show bottom error.
OC4J Configuration issue. [Oracle_home]/oc4j/j2ee/OC4J_DBConsole_Error occurred dur
ing initialization of VM
java.lang.Error: Properties init: Could not determine current working directory.
_[SID_NAME] not found.
How to fix?
And in log file I found "WARNING: inbound connection timed out (ORA-3136)" message many time.
Sometimes clients can't connect to database server although I can connect inside normally so I must reboot machine.
What is a problem and how to fix both problems?
Thankyou

Check Settings>Messages>Show Subject Field and make sure it's set to "Off".

How to start Enterprise manager ?

how to know if i have installed Enterprise manager or not.
what command to start Enterprise manager ?

You can start OEM as:
go to ORACLE_HOME/bin directory.
then type ./oemapp with any 1 of its 6 options.
You can type just ./oemapp and it will show the available options like instance etc.
Vinayak Thatte

How to start Enterprise Manager Server on SUN Solaris 2.8

I need to start Enterprise Manager for ORACLE 8.1.6; on server for do same think (same action not possible on client machine).
thank you all

Hi
From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
For starting OMS enter: oemctrl start oms.
Hope this helps
sarath

How to start Enterprise Security Manager in 11g

Hi All,
How to start Enterprise Security Manger in 11g ? Should Grid Control be installed seperately ? There is no menu or utility that represent Enterprise Security Manager in 11g ? In 10g there is a menu item called "Enterprise Security Manager" , how to access it in 11g ?
Regards,
Senthil.

my doubt is ,, just simply giving the above command the listener create and start or do i need to modify any other parameters which i have to copy from old listener file.The former. Unless you need/want to use non-standard parameters, you don't need anything else. Just start it.

How to View Queries run by Users in Enterprise Manager 10g?

I want to view all the queries as an Administrator, being run by all the Users on Oracle Database, where can I view in Enterprise Manager 10g ?
In Microsoft Sql Server 2000, there is a utility called "Sql Profiler" which does this purpose, any idea please ?
Best Regards,
Luqman

The "Performance" tab is part of the Tuning Pack, list price USD3000 per CPU or something to that effect. So I use good ole SQLPLUS and this sql(below). This sql includes global views for RAC which can just be changed to v$ for sinlge instance:
column osuser format a10;
set linesize 500;
set pagesize 0;
select sid, serial#, to_char(logon_time, ' YYYYMMDD, HH24:MI:SS'),
osuser, sql_text
from gv$session, gv$sqltext
where gv$session.sql_address=gv$sqltext.address
order by sid, piece;

How to install Enterprise manager

Hi all,
I unable to access to enterprise manager console URL.I was thinking the solution of this problem is EM unstalled and then reinstalled.So i have unstalled Enterprise manager product using
Oracle Universal installer. i don't know how to install the EM in my database. Please tell me how to install the ORACLE?
where to download Oracle EM?
Thanks,
michael.

Hi there,
for downloads of Enterprise manager, use the following link:
http://www.oracle.com/technology/software/products/oem/index.html
For instructions on how to install, use this link:
http://www.oracle.com/technology/obe/start/index.html
scroll down the page to "EM Grid Control 10g" and select "Oracle Enterprise Manager 10g Grid Control", there are currently 4 versions supported with screenshots here, enjoy.
--Grummy.

Oracle Enterprise Manager 10g Grid Controlにアクセスできない

OS:Linux　Oracle:11.2 GridControl:10.2.0.1
VM上にGridControlをインストールしアクセスしてみましたが（http://192.168.0.1:4889/em）
ページが表示できないと出ます。。
リポジトリ用のDBは11gを使用しています。
GridControlはまだ詳しくないのですが、どのあたりを調査すれば宜しいでしょうか？
基本的な事で申し訳ありませんが、宜しくお願いいたします。

いつもお世話になっております。
Grid Control10.2.0.5のインストールまでは完了したのですが
やはりアクセスできません。。
[oracle@vm1 /]$ /u01/app/oracle/oem_home/oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.vm1
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 4623 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 4624 | Alive
OC4J | OC4J_EM | 4621 | Alive
OC4J | OC4J_EMPROV | 4622 | Alive
WebCache | WebCache | 4631 | Alive
WebCache | WebCacheAdmin | 4619 | Alive
コマンドで確認したところ、OMSは稼動しているように見えるのですが
http://vm1:4889/em　でアクセスすると
Forbidden
You don't have permission to access /em/console/home on this server.
Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at vm1 Port 4889
と表示されてしまいます。。
またOMAの起動が以下のように失敗してしまうのですが
これも関係あるでしょうか？
[oracle@vm1 ~]$ /u01/app/oracle/oem_home/agent10g/bin/emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
[oracle@vm1 ~]$ /u01/app/oracle/oem_home/agent10g/bin/emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ........................................................................................................................... failed.
OMAが起動していなくても、Girdへのアクセスは出来るのでは？？という認識なので。。
宜しくお願い致します。

Installing the Enterprise Manager 10g (Browser-based) Console

i've installed the oracle 10g client and am successfully running the OEM 10g java interface. however, when i try to start the web browser-based interface, i get a "page cannot be displayed" error. the URL shown is <the name of the machine: >/em
Are any special procedures required for installing the Enterprise Manager 10g (Browser-based) Console???

There seems to be some confusion with what you are installing. Your original question was how do you install the DBConsole for 10g. When you install a 10g database, you get the option of either installing a database console or point to a Grid Control. If you need to reinstall the database console for some reason, you use the emca utility.
From your last note, it seems u don't have any Oracle database running on ur server...

How to launch Enterprise Manager?

I am trying to launch the Enterprise Manager from my 10g:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
I've tried using all of the following ports and none is working. http://hostname:port/em
How can I tell the web server for the Enterprise Manger is running?
Most important of all, how to launch Enterprise Manger?
Thanks.
;OracleAS Components reserve the following ports at install time.
;As a post-installation step, you can reconfigure a component to use a different port.
;Those changes will not be visible in this file.
Ports
Oracle HTTP Server port = 80
Oracle HTTP Server Listen port = 7778
Oracle HTTP Server SSL port = 443
Oracle HTTP Server Listen (SSL) port = 4444
Java Object Cache port = 7000
Oracle Notification Server Request port = 6003
Oracle Notification Server Local port = 6101
Oracle Notification Server Remote port = 6200
ASG port = 7890
Oracle HTTP Server Diagnostic port = 7200
Log Loader port = 44000
Application Server Control RMI port = 18140
DCM Discovery port = 7100
Oracle Management Agent Port = 18120
Application Server Control port = 18100
Web Cache HTTP Listen port = 80
Web Cache HTTP Listen (SSL) port = 443
Web Cache Administration port = 9400
Web Cache Invalidation port = 9401
Web Cache Statistics port = 9402
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021
Reports Services SQL*Net port = 1950

How can I tell the web server for the Enterprise Manger is running? emctl status dbconsole
TZ set to US/Pacific-New
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://bcm-laptop:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
Logs are generated in directory /u01/app/oracle/product/10.2.0/db_1/bcm-laptop_v102/sysman/log
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version
Most important of all, how to launch Enterprise Manger?emctl start dbconsole
Edited by: sb92075 on Jan 21, 2010 8:37 PM

LogMiner Viewer in the Enterprise Manager 10g ??

Does somebody know if there is LogMiner Viewer in the Enterprise Manager 10g?
How could I do to work with this tool ?
Thanks

There is a 10g style. It comes with the client software. It is very much a stripped down version. I downloaded it and installed it. I could not find Logminer viewer in it. I did find some documentation. Here is what it says.
Launching LogMiner Viewer
To launch LogMiner Viewer, take the following steps:
Invoke LogMiner Viewer: On UNIX platforms, enter:oemapp lmviewer
The command string is case-sensitive and must be entered with lowercase characters.
On Windows NT, from the Programs menu,
choose Oracle_home > Database Administration > LogMiner Viewer.
After you invoke LogMiner Viewer,the Login dialog box is displayed.
Select Launch standalone.
Now, you can connect to a standalone Oracle Enterprise Manager repository.
If you do not have a standalone repository or if LogMiner Viewer is not aware
of an existing standalone repository, you cannot save queries.
When you attempt to expand a database or save a query, LogMiner Viewer displays
an informational message and leads you through a dialog to connect to or to create
a repository. See Connecting to or Creating a Standalone Repository for more information.
Click OK.

Using Weblogic as web server for Enterprise Manager 10g R3?

hello,
can i have your help on this?
i want to use Weblogic as web server instead of apache in the structure of Enterprise Manager 10g R3?
have any of you try this? can someone please provide me some link related to how to configure Weblogic as web server for Enterprise Manager.
Many thanks in advance
Cheers,
Cosmin

Im dont think its possible to do this with enterpise manager (Dbcosole), It might be possible with GRID .. have a look here
http://www.oracle.com/technology/products/wag/index.html

Oracle Enterprise Manager 10g is not running.

Hi All,
I cloned e-Business suite application/db to another server.After cloned Oracle Enterprise Manager 10g is not running. I've been noticing following messages during start/stop/status.
status
Oracle Enterprise Manager 10g is not running.
start: doen't show any error.
stop:
Stopping Oracle Enterprise Manager 10g Database Control ...
... Failed.
Log info:
servername.domain_SID/sysman/log shows following errors.
emos.log : ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sys
emdb.nohup log
--- Wed Apr 16 12:37:14 2008::The agentTZRegion value in /orafissbx1/u00/app/oracle/10.2.0.3/cob-eamdbd-01.wssc.ad.root_FISSBX1/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script 'mgmt_target.set_agent_tzrgn' to get the value propagated to repository -----
emoms.trc
[Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.
I opened the SR but still issues has n't fixed. I did all steps mentioned in TZ and etc according to metalink.
Please suggest.
Thanks

This is expected behavious. It is because Enterprise Manager cannot run with the new server name. You can either go through loads to change the config files or simply drop and recreate the console.

How to start Enterprise manager 10g Linux?

Similar Messages

Maybe you are looking for