How to start Fireworks as default?

Ok, I was working on Fireworks for the first time today as I'm new in design. The problem is, each time I start Fireworks, I saw my workings which I have done earlier remain the same. For example, in my earlier work, I have used the rectangle tool in the toolbox, add some colors etc...and when I start Fireworks after that, the toolbox and other working places do start by default as it was when the first time I use Fireworks. How to reset them all?

Try the Reset Warning Dialogs in Preferences under the General tab. If that doesn't do what you want, quit Fireworks, locate the Fireworks Preferences file on your hard disk and delete it. (The exact location of this file varies from system to system.) Restart Fireworks.
The next time Fireworks is launched, a new preferences file is created.

Similar Messages

All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default s

I don't know what happened. All of a sudden, my settings have been changed, my homepage, and EVERYTHING. No matter how many times I go in and change them again, the SAME pages open up when I start FireFox and I am constantly being asked if I want Yahoo as my start page and default search engine. I click the box 'do not ask me again' and it comes up EVERY TIME. I change things like I don't want history remembered, and when I reload FireFox again, it's back to the way it was BEFORE. EVERY SINGLE TIME. I don't know why this is happening, or how to fix it. What do I do??

I do not want to download another virus program.. I do not believe it is a virus. I am running the full version of Norton 360 and it is doing a daily scan. I have Windows 7, 64 bit OS.
This is very irritating !! If I wanted Yahoo I would ask for it !

How do you set a default on the Mac that automatically starts a sentence with a capital letter after a full stop? Thanks guys....

How do you set a default on the Mac that automatically starts a sentence with a capital letter after a full stop? Thanks guys....

I use SpellCatcher.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

How can I change the default start up folder to be d:\work\ ?

How can I change the default start up folder to be d:\work\ ?
It seems to be going to one default folder every time I open that I didn't suggest.
I'm using Bridge CS4
Thanks ahead
Line

If the program does not open the last folder you visited you most likely have the option enabled to autoload Bridge on Startup. Either disable that option in PS or shut Bridge down before you shut off the computer.
Message was edited by: curt y
If you always want it to start on a specific folder you can leave it on autoload, go to folder you want it to start on then exit Bridge. It should load this each time in future. Many of us discourage the autoload option as it can lead to other problems as well.

How to start default portal in ECC 6.0

Hi Experts ,
I have installed ECC 6.0 (Netweaver 7.0) in my system, i want to use portal in that.
How to start the portal or login to that ?
Thanks
Aisurya

Hi,
ECC is different and Netweaver is different. After installation,
Create your WD ABAP application, and you have to integrate this into portal to open your WD application
in portal.
Web Dynpro for ABAP provides portal integration API. It allows to navigate from a Web Dynpro iView to any other iView. Below codesnip can be used to navigate to an SAP transaction iView and pass a parameter to one dynpro field.
WE have different portal events to navigate to portal, we ahve to use them.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/f86f4132f15c58e10000000a1550b0/content.htm
For portal Integration.. follow this..
Web Dynpro for ABAP Portal Integration [original link is broken]
Cheers,
Kris.

How to start/ restart the service in visual admin of SAP WAS 6.4?

I have installed the sneak preview version of SAP NetWeaver WAS 6.4 for default Database MaxDB. While developing a simple application to manage simple database table citymaster with 2 columns in jsp I am getting error as
Exception e com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at : java.comp.
Looking at visual admin tool for WAS 6.4 all the entries are in color blue but the last entry for 'DATASOURCE' is in RED color where 'java.comp/env/JDBC/DATASOURCE' is the jndi reference created for default DataSource.
Can any one help me that why the last entry is in RED and it that say that some error has occured or that entry is not started then how to start that?
Please help....

Dear Daniel,
I have checked the Visual Administrator's JNDI Registry service entry in the ejbContexts node but there is no entry for the project which I have created.
It get deployed while I right click on the project's ear file and click on "Deploy on J2EE Engine". But same as before while checking in Browserthe site gives the same error...
503   Service Unavailable
Application cannot be started!
Details: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application bcone.com/EntityCMPAppln cannot be started, because it has hard reference to resource CONFIG_DB with type javax.sql.DataSource, but it is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:508)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:285)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:355)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:120)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:224)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4170)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2390)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2267)
     at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:101)
     at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:80)
     at com.sap.engine.core.thread.impl4.SingleThread.execute(SingleThread.java:70)
     at com.sap.engine.core.thread.impl4.SingleThread.run(SingleThread.java:111)
Please help me, how to recover this error.
Rgds,
Vivek

How can I change the default (main) user?

I have inherited this computer from my sister in law. When I start Skype it thinks I am she. I have created another account for myself, but can't see how to make this the default account. I even tried unistalling and reinstalling Skype, but that didn't help.

Hello Eric
I am using the "UserDefinedErrorsDir" in LabVIEW 7.1 /7.1.1 Windows and Linux.
But there is a "syntax" problem. Let me explain this:
If you enter
UserDefinedErrorsDir=C:\
into your LabVIEW.ini File, LabVIEW will not search the Files in your C:\ Directory...
LabVIEW search the *-errors.txt Files in the
C:\errors\
Directory!
That mean that you have to create a folder with the name errors in your UserDefinedErrorsDir and after that you only have to copy all your *-errors.txt Files into this folder.
Happy Wiring
Martin CLAD

How can we change the default folder location (avoiding problems with Temporary Internet Files)

(Environment in question: Windows 7 secure desktop (running as user not admin), Office 2010)
Hello,
As has been touched on in various forums (such as here: http://forums.adobe.com/thread/797451), when one opens a PDF attachment in Outlook, Acrobat and Reader store the file in the "Temporary Internet Files" folder (f/k/a OLK folder in previous versions of Outlook. There are two major problems with this:
First, as Microsoft has documented in http://support.microsoft.com/kb/817878, attachments end up here staying here under certain conditions (go checks your now, you'll find some!), which ends up being a file attachment no man's land, and that can present security risks (e.g. if data we thought was deleted still lives in that folder).
Secondly, the first time you open an attachment in Acrobat and do a Save As, Acrobat is defaulting to the Temporary Internet Files location. This folder (as noted in the thread linked above) is ridiculously hard to get to for the average user, so they can end up storing a file and then losing it.
We've found that if we open Acrobat once, do a save as, and change to the users Documents folder, the change sticks. But how can we have Acrobat default to Documents instead of that temporary location?
Any help is greatly appreciated.

Have you check to see if Acrobat sets a registry entry or file preference for the first Save As? That's where I would start looking. Process Monitor is a good tool for this.

How can i change a default ....

How can i change the default xml parser used by oracle??
can i use xerces ??? or something different
i am using Oracle 9....03 version
and transformation i am doing is using transform function of xmltype.
The things which work using some xml parsers seems are not working with oracle default parser
transformations.
Can anyone pls tell how to chnage the xml parser ????

Yes i want the transform function of xmltype to use some different parser to transform the document.
Because the application which was working with different parser stops working when i moved my xml to oracle database to use xmldb functionality
i can find small small problems with the oracle xml parser.... like entities cannot be defined in xsl, cannot use format-number, converting less than angle bracket to & lt ; even if i specifying to disable output escaping.. beacuse of which it started giving me lots of problems.
These all were working with the other xml parsers...
i am stuck don't know what to do now ??

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in private browsing?

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in Private Browsing?
I'm just starting using Firefox but I won't be using it for long if I have to re-size the screen with every new location viewed.

Try this add-on
[https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level ]

How to start Top-Level Navigation on Level two?

Hi,
does anyone known a trick how i can start the top-level navigation at Level two?
I make an own frameworkpage and try to set it in the iview properties, but there is not an property for this. it is only for the detailed-navigation iView there.
For what:
I need this, because i would open an pop-up with an other portal window. I link to the popup with navigation-target=... In this pop-up should only be the content of one role. This folder i have set to "invisible in the navigation area". So the User always see him in a popup. when i start at the default Top-navigation level 1, the user see all the other navigation folders.
Best regards,
Patrick

Hi Patrick,
up to SPS13, this needs some hands on on different parts of the TLN. What I've done this spring was showing all top-level nav targets within a select box in the masthead and then, after having selected one of these entries, the TLN shows just the content of this top level entry. So this is more or less the same. As said, some work to do.
As of SPS14, with the new navigation taglib, I expect this to be much less work; anyhow, I didn't convert the results into SPS14, so I cannot say if this is really as easy as I expect.
Hope it helps
Detlev

How do you make pages default document reader

Hi
I have just started using pages and i cant seem to work out how to make it the default application to open up the many documents i have.
Every time i open a document it opens in textedit, i know that you can choose in properties with which program to open it with, but i am getting really fed up of doing this.
is there any way to make pages the default instead of textedit program.
Ta
Karl
p.s I used to use MS office but i cant be bothered to reinstall it and most of my docs are .doc (office format)

kb,
You can set .doc files to open in Pages, and its surprisingly easy: just go to the Finder, single-click on any .doc file, then type command-I (Get Info). Click on the Open With... menu and select Pages (or navigate to Pages if it's not in the menu). To make all .doc files open in Pages, click on the Change All button.
You can do the same thing with other types of files, like RTF or plain text.
-Dennis

How do i change the default Page Setup settings?

I have a recurring "bug" - whenever i open a PDF - and usually when i create new files (in any program), the default setting is to have it print horizontally at 65%.
to be more concise, if i open a blank document in "Text Edit" as an example and go to Page Setup - its already set to 65%, rotated horizontal - - instead of vertical orientation at 100%.....
This is frustrating, as I often forget this - go to print a PDF - and it comes out very small and rotated 90 degrees.
This even happened when i recently got a new printer and had to install / setup a new driver.
I was able to get it to stop a long time ago by deleting all of my printers and starting over from scratch - but the problem quickly resurfaced.
(I think it may have something to do with receiving a PDF from a third party that had this setting to allow me to print a larger drawing onto letter sized paper - - but it seems to overtake all of my files as default.)
I hope i explained this clearly.....what i would like to do is know how to definitively change this "default" setting.....

Hi, no idea why AAPL said what was said, just too busy I think!?
Anyway, have you tried File>Page Setup..., then setting the Scale, Size, & Orientation, then same Window>Settiungs>Page Attributes>Save as Default... or even the Restore Original Defaults there?

How do you modify the default Execute thread count in Weblogic Server 9.2?

How do you modify the default Execute thread count in Weblogic Server 9.2?
How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
Is there an option from the console?
Please let me know.
Thanks

Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
1) Modifying the config.xml
Just add the following line(s) to each server definition :
<server>
<name>AdminServer</name>
<self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
<self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
</server>
2) Adding some JVM parameters
It's safer the following way :
add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
Regards
RR

How to start with FPGA and LABVIEW when you do not know any computer language? Only have exposure to Windows OS.

Myself is an Electronics Engineer. But I don't have any exposure to any comp language like C or whatever. I do not have any exposure to Labview as well. I've been involved in design and developing Digital Circuits like interlock units, Position monitoring and display systems etc. Now I want to work upon FPGA based circuits. Can anyone suggest me plz that how to start with?

Hi BNarendra;
Here are some resources that can be useful, the first is an introduction to LabVIEW and the other ones are for LabVIEW FPGA.
LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/5247
LabVIEW FPGA
http://www.ni.com/swf/presentation/us/labview/lvfpga/default.htm
http://digital.ni.com/public.nsf/allkb/0697A6F4BFC6E152862570FA0072153A?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3261
I hope the information is useful.
Good Luck!
Francisco Arellano
National Instruments Mexico
Field Systems Engineer - Energy Segment
www.ni.com/soporte

How to start Fireworks as default?

Similar Messages

Maybe you are looking for