How to start for the following Irradiance format?

http://www.solar-repository.sg/index.php/meteorological-data/live-data.html
If i want the table like the Global Irradiance. How do i start?
Solved!
Go to Solution.

Try this:
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

How to start checking the bottle necks in PL/SQL for benchmarking?

How to start checking the bottle necks in PL/SQL for benchmarking? Can anbody post me the instructions to start tuning the Oracle PL/SQL code..
Thanks & Regards,
VJ

you can use DBMS_PROFILER to do this. This built in package is very well documented:
http://www.oracle.com/pls/db102/ranked?word=dbms_profiler&remark=federated_search
Depending on your IDE, you could get a visual representation of the profile. Something like:
http://technology.amis.nl/blog/2327/dbms_profiler-report-for-sql-developer

Depreciation for additions to start from the following month

Hi Gurus,
Have situation in depreciation posting, When acquisition happens depreciation has to start from next period on wards (Dep not to post in Acq period) this is working fine and good. (period control maintained as 11 for Acq)
In the same way it has to apply for Additions if any happens for existing Acquisitions. Period control set as next month 11 for additions, but system making the posting in acquisition period itself including catchup of previous periods from oredinary dep starting.
I want make the system to start depreciating dep from the following period rather than acquisition period for Additions and catcup dep also post in this from Ordinary depreciation start date .
Example of Issue:
Acquisitions:
Acquisition happend in Period-01, dep started from next period "02"
This working fine.
Addiotions:
Using the above example
Addition happend in period-05, Dep started from-05 including the catch up dep of periods; 02,03,04,05.
By right the depreciation posting has to starts in the following Perios 06, has to consider Catchup amounts also.
Any help on the above are appreciated most.
Points are available
Thanks in advance,
Vyas

Hi Milosavljevic,
On the above system behaviour is right, but we have to understand like below:
What ever posted the Depreciation amount in the acquissition month it belongs to accumilation depreciation of the addition of asset ( from ordinary dep start date to untill acquissition period).These happend bcoz of catchup, the real depreciation was started from the following month onwards..
Hope this understanding made me clear...
If u able to find any thing better pla keep share..
Others plz comment on this for better understanding.
Thanks,
Vyas

How do i solve the following problem. By starting up the message appears: could not found CoreFoundation.dll. Windows error 7

By starting up the following message appaers: could not found CoreFoundation.dll.
Windows Error 7
How can I solve this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

How to creat an xsl for the following code ?

Hi all !
Could any one help me to creat an xsl (in the form of table) for the following xml data ?
<?xml version="1.0" encoding="UTF-8"?>
<scenarioReport>
<node name="V2_DR">
<netObjId >1 </netObjId>
<result>undefined</result>
<report>xyz</report>
<action>no action</action>
<netObjId > 2 </netObjId>
<result>defined</result>
<report> sdfherh</report>
<action>action</action>
</node>
<node name="V3_DR">
<netObjId >1 </netObjId>
<result>undefined</result>
<report>xyz</report>
<action>no action</action>
<netObjId > 2 </netObjId>
<result>defined</result>
<report>dfhdfj</report>
<action>action</action>
</node>
</scenarioReport>
could you please send me as soon as possible !!!!

To do that you would have to know what output the XSL should produce, based on the input. You haven't said anything about that. All you have posted is a single XML file which could be either the input or the output of this mythical XSL. Do what Steve said and read the tutorial.

How do I fix the following error, it comes up every time I open a Firefox page; "type error: Components.classes[cid] is undefined" (JavaScript Application)

== Issue
==
I have another kind of problem with Firefox
== Description
==
how do I fix the following error, it comes up every time I open a Firefox page; "type error: Components.classes[cid] is undefined" (JavaScript Application)
== This happened
==
Every time Firefox opened
== a few months ago
==
== Troubleshooting information
==
Application Basics
Name Firefox
Version 3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Adblock Plus 1.2 true
Adobe DLM (powered by getPlus(R)) 1,6,2,49 true
AVG Safe Search 9.0.0.825 true {3f963a5b-e555-4543-90e2-c3908898db71}
AVG Security Toolbar 4.504.019.002 true avg@igeared
Fasterfox 2.0.0 false
Forecastfox 0.9.10.2 true {0538E3E3-7E9B-4d49-8831-A227C80A7AD3}
Java Console 6.0.05 true
Java Console 6.0.03 true
Java Console 6.0.07 true
Java Console 6.0.11 true
Java Console 6.0.13 true
Java Console 6.0.15 true
Java Console 6.0.17 true
Java Quick Starter 1.0 true [email protected]
Microsoft .NET Framework Assistant 1.2.1 true {20a82645-c095-46ed-80e3-08825760534b}
NoScript 1.9.9.77 true {73a6fe31-595d-460b-a920-fcc0f8843232}
Java Console 6.0.19 true
Java Console 6.0.20 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.history_expire_days 0
browser.history_expire_days.mirror 180
browser.places.importBookmarksHTML false
browser.places.importDefaults false
browser.places.leftPaneFolderId -1
browser.places.migratePostDataAnnotations false
browser.places.smartBookmarksVersion 2
browser.places.updateRecentTagsUri false
browser.startup.homepage_override.mstone rv:1.9.2.3
extensions.lastAppVersion 3.6.3
general.useragent.extra.microsoftdotnet ( .NET CLR 3.5.30729)
keyword.URL http://au.yhs.search.yahoo.com/avg/search?fr=yhs-avg&type=yahoo_avg_hs2-tb-web_au&p=
network.cookie.prefsMigrated true
places.last_vacuum 1272511429
print.print_bgcolor false
print.print_bgimages false
print.print_command
print.print_downloadfonts true
print.print_evenpages true
print.print_in_color true
print.print_margin_bottom 0.5
print.print_margin_left 0.5
print.print_margin_right 0.5
print.print_margin_top 0.5
print.print_oddpages true
print.print_orientation 0
print.print_pagedelay 500
print.print_paper_data 0
print.print_paper_height 11.00
print.print_paper_size -134744073
print.print_paper_size_type 1
print.print_paper_size_unit 0
print.print_paper_width 8.50
print.print_printer Lexmark 4200 Series
print.print_reversed false
print.print_scaling 1.00
print.print_shrink_to_fit true
print.print_to_file false
print.printer_Lexmark_4200_Series.print_bgcolor false
print.printer_Lexmark_4200_Series.print_bgimages false
print.printer_Lexmark_4200_Series.print_command
print.printer_Lexmark_4200_Series.print_downloadfonts true
print.printer_Lexmark_4200_Series.print_edge_bottom 0
print.printer_Lexmark_4200_Series.print_edge_left 0
print.printer_Lexmark_4200_Series.print_edge_right 0
print.printer_Lexmark_4200_Series.print_edge_top 0
print.printer_Lexmark_4200_Series.print_evenpages true
print.printer_Lexmark_4200_Series.print_footercenter
print.printer_Lexmark_4200_Series.print_footerleft &PT
print.printer_Lexmark_4200_Series.print_footerright &D
print.printer_Lexmark_4200_Series.print_headercenter
print.printer_Lexmark_4200_Series.print_headerleft &T
print.printer_Lexmark_4200_Series.print_headerright &U
print.printer_Lexmark_4200_Series.print_in_color true
print.printer_Lexmark_4200_Series.print_margin_bottom 0.5
print.printer_Lexmark_4200_Series.print_margin_left 0.5
print.printer_Lexmark_4200_Series.print_margin_right 0.5
print.printer_Lexmark_4200_Series.print_margin_top 0.5
print.printer_Lexmark_4200_Series.print_oddpages true
print.printer_Lexmark_4200_Series.print_orientation 0
print.printer_Lexmark_4200_Series.print_pagedelay 500
print.printer_Lexmark_4200_Series.print_paper_data 1
print.printer_Lexmark_4200_Series.print_paper_height 11.00
print.printer_Lexmark_4200_Series.print_paper_size -134744073
print.printer_Lexmark_4200_Series.print_paper_size_type 0
print.printer_Lexmark_4200_Series.print_paper_size_unit 1
print.printer_Lexmark_4200_Series.print_paper_width 8.50
print.printer_Lexmark_4200_Series.print_reversed false
print.printer_Lexmark_4200_Series.print_scaling 1.00
print.printer_Lexmark_4200_Series.print_shrink_to_fit true
print.printer_Lexmark_4200_Series.print_to_file false
print.printer_Lexmark_4200_Series.print_unwriteable_margin_bottom 0
print.printer_Lexmark_4200_Series.print_unwriteable_margin_left 0
print.printer_Lexmark_4200_Series.print_unwriteable_margin_right 0
print.printer_Lexmark_4200_Series.print_unwriteable_margin_top 0
privacy.clearOnShutdown.cookies false
privacy.clearOnShutdown.offlineApps true
privacy.cpd.cookies false
privacy.item.offlineApps true
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 3
security.warn_viewing_mixed false
security.warn_viewing_mixed.show_once false
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-getplusplusadobe16249
*Office Plugin for Netscape Navigator
*Adobe PDF Plug-In For Firefox and Netscape
*Default Plug-in
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.0 r45
*iTunes Detector Plug-in
*Garmin Communicator Plug-In 2.8.1.0
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Java(TM) Platform SE binary
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

How do I fix this problem ...javascript (cid) applications.

How do i convert the following case statement to a table and still implement it in the store procedure.

if @CustNo = '0142' begin insert #custnos (CustNo, ClientNo) values ('0142', '1100') ,('0142', '1200') ,('0142', '1201') ,('0142', '1700') ,('0142', '1602') ,('0142', '1202') ,('0142', '1603') ,('0142', '2002') endstore procUSE ODSSupport
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
if exists (select * from dbo.sysobjects where id = object_id(N'dbo.pr_Load_PASOArgusClaims_Work') and OBJECTPROPERTY(id, N'IsProcedure') = 1)
BEGIN
drop procedure dbo.pr_Load_PASOArgusClaims_Work
IF OBJECT_ID ('dbo.pr_Load_PASOArgusClaims_Work') IS NOT NULL
PRINT '<<< FAILED DROPPING PROCEDURE dbo.pr_Load_PASOArgusClaims_Work >>>'
ELSE
PRINT '<<< DROP PROCEDURE dbo.pr_Load_PASOArgusClaims_Work >>>'
END
GO
CREATE PROC dbo.pr_Load_PASOArgusClaims_Work
@BatchNo varchar(7) = null,
@CustNo char(4) = null,
@NewBatchNo varchar(7) = null
AS
/* Object dbo.pr_Load_PASOArgusClaims_Work 2006234 */
-- SSR# : 2242
-- Date : 12/23/2005
-- Author : Roxy Newbill
-- Description : Add new PASO BCAT 1602
-- SSR# 1932 - 2/22/2006 SEN - Add logic to include only ArgusCustNo - 0142
-- and change PharmacyClaim.ProcessDate to DateWritten
-- SSR# : 2419
-- Date : 08/22/2006
-- Author : Betty Doran
-- Description : PASO reports project
-- Correct mapping of Dispense fee amt from 'AmtProfFee' to 'DispenseFee' -
-- Mapping changed by Argus - did not inform PHP. Used in calcs for mClaimTotAmtCharge and
-- mClaimAmtAllowed fields.
-- SSR# : 2496
-- Date : 06/27/2007
-- Author : Roxy Newbil
-- Description : PASO Reporting Project
-- Add data load for new columns: Prescription No, Drug Name, NDC
-- SSR# : PEBB PROJECT
-- Date : 10/13/2009
-- Author : Tj Meyer
-- Description : Add BCAT 1201 for new PEBB business--
-- SSR# : 132707
-- Date : 12/17/2009
-- Author : Terry Phillips
-- Description : PASO Reporting Project
-- Fix data length issues for Argus_SubGroupId,Argus_PlanCode,vchParticipantId,
-- vchProviderId
-- SSR# : 3253
-- Date : 03/28/2011
-- Author : Susan Naanes
-- Description : PrescriptionNo increased in size from 7 to 12 characters
-- SSR# : SPOCK project
-- Date : 08/09/2012
-- Author : Raymond Beckett
-- Description : Modifed to bring in RxKey from PharmacyClaim instead of using identity value for iRecId
-- Also, modified to load any new batches since last batch loaded into PASOArgusClaims
-- if @BatchNo not supplied
-- Various 'fixes'
-- - removed grouping from initial query due to unique grouping caused by BatchNo, ClaimNumber, ClaimType
-- SSR# : TFS 5264 - Premera Remediation -(3997)
-- Date : 12/21/2012
-- Author : Satish Pandey
-- Description : Add BCATs 1202 and 1603 to the Where clause selecting pharmclm.ArgusClientNo as BCAT
-- SSR# : TFS 10286
-- Date : 1/15/2014
-- Author : Raymond Beckett
-- Description : Add HRI Customer Number and BCAT's. Also add Customer Number and alternate batchno to parameters
-- Only use '@NewBatchNo' if adding data from missed custno and the batchno already exists in PASOArgusClaims
-- ITSM Ticket : 1800925
-- Date : 4/15/2014
-- Author : Roxy Newbill
-- Description : Silverton Hospital had new BCAT (2002) with start of 2014 business. This was never accomodated for
-- Adding this BCAT in so that we can start capturing these claims (Note, special insert being done to capture
-- all BCAT 2002 claims prior to this fix.)
-- ITSM Ticket : TFS 14587 -Intel BCAT Remediation
-- Date : 08/14/2014
-- Author : Andrew Omofonma
-- Description : Added BCAT's (1604,& 2103) for Intel
SET NOCOUNT ON
DECLARE @iCount int
create table #tmpArgusWork (
iRecId int,
BatchNo varchar (7) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
BatchDateTime datetime NULL ,
BatchStatus varchar (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
ReadyDateTime datetime NULL ,
Argus_GroupId varchar (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
Argus_SubGroupId varchar (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
Argus_ClassId varchar (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
Argus_PlanCode varchar (8) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
Argus_BusinessCategory varchar (8) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
FacetsClaimSubType varchar (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
PASOClaimType varchar (20) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
vchClaimNumber varchar (14) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
dtPaidDate datetime NULL ,
dtProcessDate datetime NULL ,
dtServiceDate datetime NULL ,
vchParticipantId varchar (14) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
vchProviderId varchar (12) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
vchProviderName varchar (55) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
mClaimTotAmtCharge money NULL ,
mClaimAmtDiscount money NULL ,
mClaimAmtAllowed money NULL ,
mClaimAmtDenied money NULL ,
mClaimAmtDeduct money NULL ,
mClaimAmtCoinsurance money NULL ,
mClaimAmtCopay money NULL ,
mClaimAmtPaid money NULL ,
PASO_GroupId varchar (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
PASO_SubGroupId varchar (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
PASO_ClassID varchar (4) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
PASO_PlanCode varchar (8) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
PASO_BusinessCategory varchar (8) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
RecordStatus varchar (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
ErrorDesc varchar (128) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
PrescriptionNo char(12) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
DrugName varchar(30)COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
NDC char(11) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
create table #batches (
BatchNo char(7) not null
primary key (BatchNo))
create table #custnos (
CustNo char(4),
ClientNo char(5), -- bcats associated with the customer
primary key (CustNo, ClientNo)
DECLARE
@len_Argus_SubGroupId smallint,
@len_Argus_PlanCode smallint,
@len_vchParticipantId smallint,
@len_vchProviderId smallint
--Get field lengths for the following fields
SELECT @len_Argus_SubGroupId = 4, --datalength([@tmpArgusWork].[Argus_SubGroupId]),
@len_Argus_PlanCode = 8, --datalength(@tmpArgusWork.Argus_PlanCode),
@len_vchParticipantId = 14, --datalength(@tmpArgusWork.vchParticipantId),
@len_vchProviderId = 12 --datalength(@tmpArgusWork.vchProviderId)
declare @maxbatch char(7)
IF @BatchNo IS NULL
begin
-- assume normal run. Add ClientNo's and custno's to tables
insert #custnos (CustNo, ClientNo)
values ('0142', '1100')
,('0142', '1200')
,('0142', '1201')
,('0142', '1700')
,('0142', '1602')
,('0142', '1202')
,('0142', '1603')
,('0142', '2002')
,('0142', '1604')
,('0142', '2103')
,('0669', '*')
-- get batches loaded since last batch loaded into PASOArgusClaims
SELECT @maxbatch=Max(BatchNo)
FROM ODSSupport.dbo.PASOArgusClaims
declare @dt datetime
declare @ds datetime
select @dt = MIN(DateTimeStamp)
from ODS.dbo.PharmacyClaim_Common
where BatchNo <= @maxbatch
and DateTimeStamp > DATEADD(dd,-16,getdate())
insert #batches (BatchNo)
select distinct BatchNo
from ODS.dbo.PharmacyClaim_Common pcc
inner join #custnos ct
on ct.CustNo = pcc.ArgusCustNo
and (
ct.ClientNo = '*'
or
ct.ClientNo = pcc.ArgusClientNo
where DateTimeStamp > @dt
; -- batch may have had a claim altered since last load, drop any batches already loaded into PASOArgusClaims
with pba as (
select distinct BatchNo
from ODSSupport.dbo.PASOArgusClaims
delete ba
from #batches ba
inner join pba
on pba.BatchNo = ba.BatchNo
end
else if @NewBatchNo is not null and @CustNo is not null
begin
--make sure we haven't already done this batch number/customer combination
set @maxbatch = @NewBatchNo
SELECT @iCount=count(*)
FROM PASOArgusClaims
WHERE BatchNo=@maxbatch
and Argus_BusinessCategory = @CustNo
IF @iCount > 0
begin
PRINT 'Msg: Batch ' + @maxbatch + ' already exists for CustNo ' + @CustNo + '.'
end
else
begin
if @CustNo = '0142'
begin
insert #custnos (CustNo, ClientNo)
values ('0142', '1100')
,('0142', '1200')
,('0142', '1201')
,('0142', '1700')
,('0142', '1602')
,('0142', '1202')
,('0142', '1603')
,('0142', '2002')
,('0142', '1604')
,('0142', '2103')
end
if @CustNo = '0669'
begin
insert #custnos (CustNo, ClientNo)
values ('0669', '*')
end
insert #batches (BatchNo)
values (@BatchNo)
end
end
else
begin
--make sure we haven't already done this batch number
set @maxbatch = @BatchNo
SELECT @iCount=count(*)
FROM PASOArgusClaims
WHERE BatchNo=@maxbatch
IF @iCount > 0
begin
PRINT 'Msg: Batch ' + @maxbatch + ' already loaded.'
end
else
begin
insert #batches (BatchNo)
values (@maxbatch)
end
end
** Insert Pharmacy Claims to temporary table
INSERT INTO #tmpArgusWork
SELECT
pharmClm.RxKey,
isnull(@NewBatchNo, pharmClm.BatchNo),
pharmclm.OrigDateTimeStamp as BatchDateTime,
'PENDING' as BatchStatus,
NULL as ReadyDateTime,
substring(pharmClm.GrpNumber,1,8)as Argus_GroupID,
left(pharmClm.ArgusSubgroup1,@len_Argus_SubGroupId) as Argus_SubgroupID,
substring(pharmClm.GrpNumber,9,4) as Argus_ClassId,
substring(pharmClm.GrpNumber,13,@len_Argus_PlanCode) as Argus_PlanCode,
pharmClm.ArgusClientNo as Argus_BusinessCategory,
'' as vchFacetsClaimSubtype,
PASOClaimType = CASE WHEN pharmClm.ClaimType='A'
THEN 'PHARMACY-ADJUST'
ELSE 'PHARMACY'
END,
pharmClm.ClaimNo,
pharmClm.DateCutoff as dtPaidDate,
pharmClm.DateWritten as dtProcessDate,
NULL as dtServiceDate,
left(pharmClm.MemberId,@len_vchParticipantId) as vchParticipantId,
left(pharmClm.PharmacyNo,@len_vchProviderId) as vchProviderId,
vchProviderName = CASE WHEN pharmclm.PayMemberInd = 'Y'
THEN 'Member Reimbursement'
ELSE pharm.PharmName
END,
mClaimTotAmtCharge = CASE WHEN pharmclm.PayMemberInd = 'Y' -- When this is a member reimbursement use the amt paid
THEN isnull(pharmClm.IngredientCostPaid,0) + isnull(pharmClm.DispenseFee,0) + isnull(APSFee,0) -- as amt charged.
ELSE isnull(pharmClm.AmtBilled,0)
END,
case when pharmclm.PayMemberInd = 'Y'
then isnull(pharmClm.AmtRejected,0) * -1
else isnull(pharmClm.AmtBilled,0) - isnull(pharmClm.IngredientCostPaid,0) - isnull(pharmClm.DispenseFee,0) - isnull(APSFee,0) -isnull(pharmClm.AmtRejected,0)
end as mClaimAmtDiscount,
isnull(pharmClm.IngredientCostPaid,0) + isnull(pharmClm.DispenseFee,0) + isnull(APSFee,0) as mClaimAmtAllowed,
isnull(pharmClm.AmtRejected,0) as mClaimAmtDenied,
isnull(pharmClm.MemberPaidAmt,0) - isnull(pharmClm.MemberCopayAmt,0) as mClaimAmtDeduct,
0 as mClaimAmtCoinsurance,
isnull(pharmClm.MemberCopayAmt,0) as mClaimAmtCopay,
isnull(pharmClm.AmtPaid,0) + isnull(APSFee,0) as mClaimAmtPaid,
NULL as PASO_GroupID,
NULL as PASO_SubgroupID,
NULL as PASO_ClassID,
NULL as PASO_PlanCode,
NULL as PASO_BusinessCategory,
'OK' as RecordStatus,
NULL as ErrorDesc,
PrescriptionNo = pharmClm.PrescriptionNo,
DrugName = pharmClm.DrugName,
NDC = pharmClm.NDC
FROM ODS..PharmacyClaim as pharmClm
LEFT JOIN ODS..pharmacy as pharm on
pharmClm.PharmacyNo = pharm.PharmacyNo
INNER join #batches ba
on ba.BatchNo = pharmClm.BatchNo
INNER join #custnos ct
on ct.CustNo = pharmClm.ArgusCustNo
and (
ct.ClientNo = '*'
or
ct.ClientNo = pharmClm.ArgusClientNo
WHERE pharmClm.ClaimType in ('P','A') -- Processed or Adjusted
--AND pharmClm.ProcessCode <> 'MC' --code doesn't exist
--GROUP BY
-- pharmClm.BatchNo,
-- substring(pharmClm.GrpNumber,1,8),
-- substring(pharmClm.GrpNumber,9,4) ,
-- substring(pharmClm.GrpNumber,13,@len_Argus_PlanCode),
-- pharmClm.ArgusSubgroup1,
-- pharmClm.ClaimNo,
-- pharmClm.ArgusClientNo,
-- pharmClm.DateCutoff,
-- pharmClm.DateWritten,
-- pharmClm.MemberId,
-- pharmClm.PayMemberInd,
-- pharmClm.PharmacyNo,
-- pharm.PharmName,
-- pharmClm.OrigDateTimeStamp,
-- pharmClm.ClaimType,
-- pharmClm.PrescriptionNo,
-- pharmClm.DrugName,
-- pharmClm.NDC
IF @@RowCount=0
BEGIN
PRINT 'Msg: No records found.'
RETURN
END
--Update the Discount column for these Pharmacy Claims
--UPDATE @tmpArgusWork
--SET mClaimAmtDiscount=mClaimTotAmtCharge-mClaimAmtAllowed-mClaimAmtDenied
** Get the lowest service Date for each claim and update temp table
UPDATE #tmpArgusWork
SET dtServiceDate = (SELECT min(pharmclm.DateSvc)
FROM ODS..pharmacyClaim AS pharmclm
WHERE pharmclm.ClaimNo = tcpr.vchClaimNumber
AND pharmclm.MemberID = tcpr.vchParticipantId)
FROM #tmpArgusWork as tcpr
** Copy over the eligibility fields that Argus provided
UPDATE #tmpArgusWork
SET PASO_GroupId = Argus_GroupID,
PASO_SubGroupId = Argus_SubGroupId,
PASO_ClassID=Argus_classid,
PASO_PlanCode=Argus_PlanCode,
PASO_BusinessCategory=Argus_BusinessCategory
FROM #tmpArgusWork pw
WHERE COALESCE(Argus_GroupID,'') <> ''
OR COALESCE(Argus_SubGroupId,'') <> ''
OR COALESCE(Argus_classid,'') <> ''
OR COALESCE(Argus_PlanCode,'') <> ''
OR COALESCE(Argus_BusinessCategory,'') <> ''
** If Argus did not provide all 5 eligibility fields, get them from faEnrollmentHistory
** based on the group, member, date of service
UPDATE #tmpArgusWork
SET PASO_GroupId = eh.GroupId,
PASO_SubGroupId = eh.SubGroupId,
PASO_ClassID=eh.Class,
PASO_PlanCode=eh.PlanCode,
PASO_BusinessCategory=eh.BusinessCategory
FROM #tmpArgusWork pw
INNER JOIN ODS..FAEnrollmentHistory eh
ON eh.MemberID =pw.vchParticipantID
AND eh.Groupid =pw.Argus_GroupID
AND eh.eligind='Y'
AND eh.ProcessCode<>'ID'
AND pw.dtServiceDate BETWEEN eh.EligEffDate AND eh.EligTermDate
WHERE COALESCE(Argus_GroupID,'') = ''
OR COALESCE(Argus_SubGroupId,'') = ''
OR COALESCE(Argus_classid,'') = ''
OR COALESCE(Argus_PlanCode,'') = ''
OR COALESCE(Argus_BusinessCategory,'') = ''
** If we have eligibility for all records, go ahead and set the ready date to today.
IF NOT EXISTS ( SELECT *
FROM #tmpArgusWork
WHERE COALESCE(PASO_GroupID,'') = ''
OR COALESCE(PASO_SubGroupID,'') = ''
OR COALESCE(PASO_ClassID,'') = ''
OR COALESCE(PASO_PlanCode,'') = ''
OR COALESCE(PASO_BusinessCategory,'') = '')
BEGIN
UPDATE #tmpArgusWork
SET ReadyDateTime=convert(varchar(10),GetDate(),101),
BatchStatus='READY'
END
ELSE
BEGIN
PRINT 'Msg: Exceptions found.'
UPDATE #tmpArgusWork
SET RecordStatus='ERR',
ErrorDesc='No valid Eligible span for this Member/Group/Subgroup at time of Service'
WHERE COALESCE(PASO_GroupID,'') = ''
OR COALESCE(PASO_SubGroupId,'') = ''
OR COALESCE(PASO_ClassID,'') = ''
OR COALESCE(PASO_PlanCode,'') = ''
OR COALESCE(PASO_BusinessCategory,'') = ''
END
** Insert the records into the final table.
INSERT INTO PASOArgusClaims
SELECT * FROM #tmpArgusWork
SET NOCOUNT OFF
END
GO
-- Verify that the stored procedure was created successfully.
IF OBJECT_ID ('dbo.pr_Load_PASOArgusClaims_Work') IS NOT NULL
PRINT '<<< CREATED PROCEDURE dbo.pr_Load_PASOArgusClaims_Work >>>'
ELSE
PRINT '<<< FAILED CREATING PROCEDURE dbo.pr_Load_PASOArgusClaims_Work >>>'
GO
GRANT EXECUTE ON dbo.pr_Load_PASOArgusClaims_Work to role_ODSLoad
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON

this part of the code below
if@CustNo
= '0142'
 begin
insert #custnos(CustNo,
ClientNo)
values ('0142',
'1100')
,('0142',
'1200')
,('0142',
'1201')
,('0142',
'1700')
,('0142',
'1602')
,('0142',
'1202')
,('0142',
'1603')
,('0142',
'2002')
 end
store proc
How do I covert it to a common table where the values can be selected from when needed.

In web dynpro i want explanation/definition for the following things

Hi dudes,
I want explanation *** definition for the following
(1) web dynpro
(2) Cardinality
(3) methods
(4) Nodes
(5) Attributes
(6) Interface
(7) Views
(8) Windows
(9) Mapping
(10)Binding
(11)Model
(12)Controller

Hi,
Here are the defintions for the terms you hav requested-
Web Dynpro Architecture
Definition
Web Dynpro is the SAP NetWeaver programming model for user interfaces (UIs).
The Web Dynpro model is based on the Model View Controller paradigm, and has the
following features that build on the classic dynpro model:
Clear separation of business logic and display logic
Uniform metamodel for all types of user interfaces
Execution on a number of client platforms
Extensive platform independence of interfaces
Web Dynpro provides support for developing Web representation of a business application.
You use specific tools to describe the properties of a Web Dynpro application in the form of
Web Dynpro metadata. The necessary source code is then generated automatically and
executed at runtime. In addition to the events offered by the framework, you can also define
your own events for a Web Dynpro application. However, the event handling must always be
programmed in separate source code areas which are executed automatically when the event
is triggered at runtime.
In Web Dynpro, each user interface is always made up of the same basic elements. These
elements of the metamodel can be statically declared using Web Dynpro tools.
It is also possible to implement elements of the metamodel at runtime and to change them or
reintegrate them at runtime. Using these implementations, you can make any changes or
enhancements to a user interface that has been created by declarative methods by
generating new interface structures at runtime.
This means that you can combine declarative processes and the implementation of source
code.
A Web Dynpro component is a reusable entity. It summarizes all components that are
required as part of this programming unit for an executable Web Dynpro application.
The Web Dynpro component concept offers a number of advantages:
Structuring of the programming
Creation of easily manageable application blocks
Reusability of whole components
Decoupling of software projects in both time and space
The Web Dynpro component contains any number of windows and views and their
corresponding controllers. Additional Web Dynpro components can also be referenced.
View
A view describes the layout and behavior of a rectangular area of a user interface.
Every Web Dynpro application has at least one view. The layout of a view is made up of
different user interface elements, which can be nested in each other. The positioning of
interface elements in one view is supported by the supplied layout variants.
In addition to the visible part, the layout, a view also contains a controller and a context. The
data to which the elements of the view can be bound are stored and managed in the view
context, enabling them to be represented or used on the screen. The view controller can
contain methods for data retrieval or for processing user input.
Window
A window is used to combine several Views and View Sets (the concept of view sets is only
offered in Web Dynpro for Java). A view can only be displayed by the browser if it has been
embedded in a window. A window always contains one or more views, which are connected
by navigation links. One of these views, or a view set, is specified as the start view and is
displayed the first time the window is called.
Windows have inbound and outbound plugs.
Inbound Plugs and Outbound Plugs
A window has one or several inbound or outbound plugs. Using these plugs, a window can be
included into a navigation chain. The concept of these plugs corresponds to the concept of
the plug for a view. Each plug of a window is visible within the entire window and can be used
for navigating within this window. In addition, one or several plugs can be made accessible to
the component interface so that they are visible even beyond the limits of the component in
question. They thus belong to the interface view of the relevant window.
They are used to navogate from one view to other and pass the data between the views. Which view to be called next from current view - the flow of views is descriebd here using Plugs.
Controller
Controllers are the active parts of a Web Dynpro application. They define how the user can
interact with the Web Dynpro application. The data that a controller can access is defined in
the corresponding context. Different instances of controllers and contexts exist within a Web
Dynpro application.
View Controller
Each view has exactly one view controller, which processes the actions performed by the user in the view.
A view also has exactly one view context, which contains the data required for the view.
Interface Controller
Each Web Dynpro component contains exactly one component controller. This controller is a
global controller that is visible also outside the component. It is thus part of the interface of a
Web Dynpro component.
Context
Definition
The data used in the component or in the view are stored in the context. Read-write access to
this data is available using the controllers as a starting point.
Structure
The data from the contexts is managed in a hierarchical structure. Each context has a root
node, underneath which the individual data fields (attributes) are stored in a tree structure.
You create this tree structure according to the structure of your application.
CONTEXT is generally called as a ROOT Node.
Each context has nodes and attributes also.
Cardinatlity
Each node contains data fields that represent one of the following:
u2022
An individual instance of an object type
u2022
A table of instances.
This property of a node is known as its cardinality. The following table summarizes the
possible cardinalities for a node:
Cardinality Description
1:1 The node contains only one element instance, which is instantiated automatically.
0:1 The node contains only one element instance, which must not be instantiated.
1:n The node can contain multiple element instances, of which at least one must always be
instantiated (and is instantiated automatically).
0:n The node can contain multiple element instances, of which none have to be instantiated.
Further information about this and other properties of context nodes is available in the section
Context-Nodes: Properties.
Recursion Nodes
Dynamic node nesting is possible within a context, creating what is called a recursion node.
The node that is used for recursion is always a predecessor of the new node. The newly
created recursion node is a reference to a predecessor node and therefore cannot be
processed separately. Instead it takes on the structure of the node to be repeated.
Data Binding and Mapping
Within the Web Dynpro architecture, the contexts of the different controllers can be linked in
different ways:
u2022
A UI element of the user interface of the view can be linked with an element of the view
context.
u2022
A mapping can be defined between two global controller contexts, or from a view
context to a global controller context.
The context of a global controller can be linked to a Web Dynpro Model.
Defining Mapping Between Two Contexts
The elements of a view context can be locally defined. In this case (represented in the graphic
below as a "Local Node"), all the contained attributes are only visible within the relevant view.
When the view disappears, the attribute values are deleted.
Event
The component controller allows you to create events.
Events are used to communicate between controllers and enable one controller to trigger
event handlers in a different controller.
Cross-component communication can be implemented using the interface controlleru2019s events.
Events that were created in the component controller are visible within the component only.
Inbound Plugs
Inbound plugs in a view also react like an event. Therefore, when a view is called using an
inbound plug, the event handler that is optionally available for the inbound plug is always
called first. In this case event handling takes place within the current view controller.
UI Element Events
Some UI elements, such as the Button element have special events that are linked with user
actions. These events are predefined and have to be linked with an action at design time.
Actions for UI Element Events
Some UI elements such as the button element can react to a useru2019s interaction: clicking on
the corresponding pushbutton can trigger a handling method to be called within the view
controller. Such UI elements are equipped with one or several general events, which can be
linked with a specific action at design time (switching to a subsequent view, for example). If
such an action is created, an event handler method for this action is created automatically. In
this way, you can equip a UI element event (which has been inserted several times into a
view) with different actions as necessary. The event is then processed by the corresponding
event handler depending on the action that is linked.
Interfaces of Web Dynpro Components
Each component has an interface in order to enable communication between Web Dynpro
components and to enable a component to be called up by a user. This interface consists of
two parts:
Interface View of a Window Contained in a Component
The interface view of a Web Dynpro window is used to link a window with a Web Dynpro
application that can be called by the user.
Reward if helpful.
Best Wishes,
Chandralekha

IP Helper Service causes Session "" failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support

Function modules for the following

Hi,
I want to know the function modules for the following purposes.
1) Check whether a date is valid or not
2) Calculate the no of days between two dates.
Expecting an early response.
Thanks n Regards,
Amit

Hi,
PARAMETERS: p_list LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY ,
 p_list1 LIKE t009b-bdatj OBLIGATORY.
SELECTION-SCREEN POSITION POS_HIGH.
PARAMETERS: p_list2 LIKE t009b-bumon AS LISTBOX
 VISIBLE LENGTH 11 OBLIGATORY,
 p_list3 LIKE t009b-bdatj OBLIGATORY.
Calling Function Module for calculating no of days between the
selected period
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list
 par_year = p_list1
 IMPORTING
 par_days = ws_n_days.
 CALL FUNCTION 'NUMBER_OF_DAYS_PER_MONTH_GET'
 EXPORTING
 par_month = p_list2
 par_year = p_list3
 IMPORTING
 par_days = ws_n_days1.
For Concatenating the month and year into the date format
 CONCATENATE p_list1 p_list ws_i INTO ws_c_date1.
 CONCATENATE p_list3 p_list2 ws_n_days1 INTO ws_c_date2.
date = ws_c_date1 - ws_c_date2.
In the above sample code the selection screen has month and year as input.
Also check this link
http://www.sapdevelopment.co.uk/tips/date/datehome.htm
Check FM
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
Also for checking valid date:
U can specify the date field as
Select-options: s_date like likp-date(similar to ur requirement)
This itself ceck for the valid date no seperate validation needed.
Thanks & Regards,
Judith.

Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>

Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks

How do I fix the following error? itunes counld not back up the iphone because the back up could not be saved on the computer?

How do I fix the following error? itunes counld not back up the iphone because the back up could not be saved on the computer?

I updated to iOS 5.0.1 days ago and didn't receive that notification until just now...
This time I synced new photos I took yesterday, and it gave me the:
"iTunes Sync: 54 items could not be synced. See iTunes for more information"
Perhaps it kicks off when new items get synced.
I've decided to rent a movie yesterday. Once it gets deleted, I'm curious to see if it jumps to 55 items.

How do I get the following to the left of my search bar: one page, X, reload page?

how do I get the following to the left of my search bar: <> one page, X, reload page?

The reload page button is no longer an option in Safari—it's been integrated into the URL bar itself. For the other buttons, you can right-click (Control-click) on the toolbar, select "Customize Toolbar", and drag the buttons on to any part of the bar.

How can we diferentiate the follow scenario

hi friends can any one give me the solluation for the following scensrio
Our client sells industrial salt (material) in the following three ways
1, the client produce the material and sell it to the customer
2, the client buy it form vendor and store the material in the clint's storage location and sells to the customer
3, the third one is he buy form vendor and ask teh vendor to deliver it to the end customer
in these theree scenarios the client is doing business for the SAMEPRODUCT
here the client wants sales &revinue reports for the own produced products suparately and traded products (which vendor suplied to the customer + sales of which he purchased and stored in clients storage location) suparately.
how to get the reports for the two above scenarios
please give me the solluation it will be very helpfull for me
and i will five full points for the solluation
thanks
nitchel

The scenarios can be mapped by the following ways for the same product
1) first one is normal sale just like sales order delivery billing
2) Second one is the Individual Purchase Order where the item is third party item. while raising the sales order if material is not available and want to procure the material from the vendor change the item categroy in the sales order as TAB instead of TAN. for this u have to do the settingin item category determination manual item category should be TAB after TAN
i mean ORNORMUSAGE+HIGHER LEVEL ITEMCATEGORY= TAN AND TAB IS IN MANUAL ITEM CATEGORY FIELD
3)follow the second process for third one as item category will be TAS .in item category determination mention the manual item category as TAS.
Reports u can see the customer wise, material wise see the follwoing list
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
dont forget to reward points if helpful
Thanks and Regards,
Rahul

Could not save the document to the repository for the following reason

Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

How to start for the following Irradiance format?

Similar Messages

Maybe you are looking for