How to start from a specific point on the timeline
I have a horizontal list of image thumbnails, there are 21 thumbnails and only 7 are visible at one time and scrolls back and forth. It works fine.
However, when I choose an image that is not in the first seven, say the 8th image, the page loads and the thumbnails goes back to the beginning images (undesirable). When the 8th image page is shown I would like the thumbnails to start at the eigth image, NOT from the beginning again.
I had the animation positioned to the eight image for the start, with the first 7 off to the left and the second 7 off to the right. But when I saved and loaded it into the page, it just starts from the begining.
How can I start the thumbnails from a specific desired position, such as the 8th image or the 15th image depending on the page?
Thank you for any help.
Anthony
Hi Anthony,
Thank you for your post.
It would be better if you share any link or actual composition with us.
Regards,
Devendra
Similar Messages
-
Loading an animation at a specific point in the timeline?
Hello,
I am trying to find out if it is possible to start/load the animation based on a specific point in its timeline? The animation I am creating is a parallax animation based on mouse position and I am trying to load it in the middle of the animation and based on the users mouse position will play forward or backwards from that point. Is this doable?
Thank youHi, Bullvinne Designs-
What you'll want to do is to stick some initialization code into the compositionReady event from the stage. This will execute after the runtime loads and before the user sees the stage.
Thanks,
-Elaine -
Open swf in new windows at specific points on the timeline
Let me start by saying that I am a newbie to Flash. I have created a Flash site and I want to create links that would open a SWF in a new window at specific points on its' the timeline. How can I do this?
It depends what version of actionscript you're using, but if you are familiar with linking to other pages using buttons, you use the same linking code, getURL (AS2) or navigateToURL (AS3), and specify "_blank" as the window parameter in the arguments for whichever you use. So if you are using AS2, then in your timeline where you want a new window to open you would have....
getURL("yourfile.html", "_blank"); -
Can I zoom in on a specific point on the timeline
There must be a way for me to zoom in on the timeline without losing my place everytime while doing so.
Is there a button I can press while zooming in that will keep the scrubbing point within my view of the timeline.
I really hope that made sense...
Patrickpatrickmbarker wrote:
what is the CTI?
Playhead.
CTI is what they used to call it: current time indicator.
If you hold alt and scroll with the mouse it will zoom in on the playhead. -
How can I export a specific clip on the timeline?
Hey all
Ive got a specific (Compound) clip that I'd like to export as FCPX is really not handling it very well.
Its actually sped up 1000%, has a Bad TV effect and colour changed. Its actually making the rest of my footage go out of sync with the audio (I guess its just too much for my system to handle)
I cant simply V disable out all the rest of the clips below it (theyre mulitcam) as you cant
select all V
them (it just doesnt disable them all)
without going in and disabling each and every clip how can I just export my highlighted clip?
ThanksCmd-C to copy; create a new temporary project, paste into it and export.
-
Hi all,
Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
Is there any function module or any table where this change log is maintained.?
I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
Thanks in advanceHi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar -
Alphabetize column starting from a specific row
I'm creating a document where i have a header and under the header i have names and numbers. In one row I have a title for "Names" (C1) in the next column, within the same row, "Phone Numbers. " (C2). My question is; how can I arrange a column in alphabetical order starting from a specific row and not the whole table. Thanks in advance.
PeterBreis0807 wrote:
Select the cells in the row or column that you want to sort:
Inspector > Table > Table > Edit Rows & Columns > Sort Ascending/Descending
It will only do the cells you have selected and leave the rest as is.
Peter
Within the Table Inspector are two buttons at the top, Table and Format.
Peter -
I have a project on Imovie with pinned audio to the project. I want to know how to stretch the audio to a specific point of the song?
See this Tutorial for how audio works in iMovie. In general, you drag the left or right edge of your audio clip.
You can also use the Clip Trimmer. Click the Gear icon in the music track and select the Clip Trimmer.
http://www.apple.com/findouthow/movies/imovie08.html#audioclips -
How to rewind to a specific point?
I have a 30 gig. Ipod on which I like to listen to audible.com books. I just got a new Nano. On my 30 gig Ipod, I can rewind or fast forward to a SPECIFIC point of the book, not just to the very beginning or to the end. I can't seem to do this with the Nano, which allows me to go only to the very beginning or to the very end. What am I doing wrong? Thanks so much in advance.
Whilst listening to the audiobook, and the iPod is in the 'Now Playing' screen, press the centre button once. A small diamond will appear in the time scroller ad the current time point. Just use the scrollwheel to get to the time where you want to listen to.
Hope that helps -
Can I set a specific point on the page to go with a button?
I got a page of 1024x3072 and i need set a button to go on a specific point of the page, for example, from 650px to 724px just using a button.
So, my question is ¿can i do that?, ¿how?...ThanksNot supported.
Bob -
Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SBWhat format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?
-
Cs6 , how can i add a anchor point in the curve in the channel Red or Green?
Hi
how can i add an anchor point in the curve in the Channel R / G and B?
in cs5 , with ctrl + click i was able to click on the image and add an anchor point in the curve channel RGB
and with shift +ctrl + click i was able to click on the image and add an anchor poing in the channel Red , 1 in the channel Green and 1 in the channel blue
i know cs6 doesn't have any more ctrl+mouse click , there is the targeted adjustamanent tool
i can do it with ctrl+m and call the curve
but i can't do it with curve adjustament tool
is there a way to add a anchor point in each channel red , green and blue (like the prev photoshop)?
thanksthanks that's correct! thanks
but it's not 100% correct
to add a multiple points in rgb shift+click doesn't work!
from adobe
Keyboard shortcuts: Curves
You can use these keyboard shortcuts for Curves:
To set a point on the curve for the selected color in each color component channel (but not in the composite channel), Shift+Ctrl-click (Windows) or Shift+Command-click (Mac OS) in the image.
To select multiple points, Shift-click points on the curve. Selected points are filled with black.
To deselect all points on the curve, click in the grid, or press Ctrl‑D (Windows) or Command-D (Mac OS).
To select the next higher point on the curve, press the plus key; to select the next lowest, press the minus key.
To move selected points on the curve, press the arrow keys.
(Curves dialog box) To set a point on the curve for the current channel, Ctrl-click (Windows) or Command-click (Mac OS) in the image.
If you’re instead using the Curves adjustment, simply click in the image with the On-image adjustment tool . -
Pages will no longer let me open files that I have previously downloaded, worked on and then saved on my mac. However it will let me open pages documents that I have started from new. I need the other documents to open and can't figure it out. PLEASE
I just got my mac a month ago so go easy on me but I was just working with the pages that was already on it, and then today I know it updated, and now I am unable to open a lot of my documents!:( Idk what you mean by the icloud version lol sorry! As for the version, when I open pages from my apps and click 'about' it says version 5.1? And when I open the document it just goes grey and kind of blinks and doesnt open? No error message or any indication of why it will not open now when I for sure have opened it in the past! Andddd for the OS X I think it is 10.9.1 ??
-
Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!
Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense... -
Hi,
iTunes is no longer syncing my iPhoto library to my iPhone 4. Everything was syncing fine when I first got the phone, but, over the past week or so, it's stopped syncing photos.
Now, after attempting to start from scratch by deleting all the photos on my iPhone, iTunes won't sync ANY photos from iPhoto back to my iPhone. I've restarted my phone, computer, etc., force quit all photo-related apps on my iPhone, and tried various combinations of turning iTunes' photo syncing on/off, switching photo sync folders, etc., all to no avail -- I can't get my iPhoto library back on to my iPhone no matter what I do.
Anyone encounter a similar situation? (I've already sent feedback to Apple.) Thanks in advance.Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314
Maybe you are looking for
-
My MBP just failed, bought it from a friend and dont have an Apple ID with Lion, Lion is no longer on the App Store so, how can I buy it on my Apple ID so I can use Recovery to put my MBP to function once again? Help D= Or what else could I do? I don
-
How do I install the newest Windows 7 software for my printer?
You may have a printer and want to install it on a Windows 7 sytem, but the CD does not work. The Windows 7 Install Wizard from HP may be able to help. It will detect the printer and help download the latest drivers and software for your printer and
-
Can't open pdf items in safari, and can't get adobe reader installed/working
can't open pdf documents/can't download and open adobe reader on imac
-
Hello all I try to run procedure that I wrote. It compile but it just doesn't affect my database. it's supposed to delete all the users that have the same name but different ID and leave only the one that have the min ID I wrote this procedure in T-S
-
I am new to LR3; have been in the learning phase still. What's a typical workflow inside of the Develop module? I understand that the Camera calibration should be used in the beginning, if at all. Other than that, what's the typical sequence of post-