How to start grounding for the architecture role?

Hi ,
I would like to change to an architect role from developer. I am having 5 year of experience in developing the application using MS Technology. So need information on the same.
Regards,
Amit

I think five year is not good enough for approaching this role but right time to getting started
I will give you three links that will lead you forward it will take at least 1-2 years to dedicated knowledge base building (links are in reading order)
Microsoft Application Architecture Guide, 2nd Edition
Enterprise Solution Patterns Using Microsoft .NET (.pdf Download)
Patterns of Enterprise Application Architecture

Similar Messages

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

How to start and stop the BI Services in Solaris 10

Hello All,
Can anyone guide me on how to start and stop the BI Services in Solaris 10. In windows there are options set in Start->Programs->Middleware_Home->Start/Stop BI Services.
Primarily after doing changes to the scheduler configuration, I need to restart the services to get it implemented? If yes how can I do it?
Any help will be appreciated
Thank you
Ash
Edited by: 902739 on Jan 11, 2012 12:17 PM

Please help me by showing action plan for stop sap , offline backup and then start sap.
i am little bit confuse How to start and stop SAP on cluster for offline backup
Below are the systems name with host name , please explain me in sequence
Systems name                                   Hostname
# Hope SAP ERP Prod DB Primary       gsgbbux860
# Hope SAP ERP Prod DB Standby      gsgbbux861
# Hope SAP ERP Prod Cluster              gsgbbux862
# Hope SAP ERP App 1                       gsgbbux864
# Hope SAP ERP App 2                       gsgbbux865
Thanks in advance
Zaheer

HT5687 Its 1 year 4 months of the purchase. How can I register for the warranty for now. Please help.

Hi,
I bought MacBook Pro in Sep/2012. I did not buy the warranty at the time of purchase. Its 1 year 4 months of the purchase now.
I lately came to know, that we cant register for apple warranty if we dont purchase it earlier.
However I want to get my Mac covered under the apple warranty. How can I do so. Please guide & help.
Thanks,
Anita

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls *.{crash,hang,panic} | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How do I Prepare for the Adobe Certified Associate (ACA) exam.

how do I Prepare for the Adobe Certified Associate (ACA) exam

I have NO idea where you should ask that question, but THIS forum is about help with installing Cloud programs
If you will start at the Forums Index https://forums.adobe.com/welcome
You MAY be able to select a forum for the specific Adobe question you have
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How to maintain cluisterview for new business roles in SAP CRM2007

How to maintain cluisterview for new business roles in SAP CRM2007.
Table - CRMV_UI_NB
Regards,
Biplab

I also look forward to a 'solved' answer to your question.
In the meantime, I'm curious to know if there are any organizations today running SAP B1 HANA for their production system. Would you know of any?

How can start service from the spfile, on Windows 2003,

On Windows 2003, how can start service from the spfile?
connect to the database as sysdba and startup will start from the spfile.
Once I use wondows Service for shutting down and startup datbase it start from the pfile.
Which defeat my ability to change parameters at the system level.

Hi,
I'm not sure, but maybe your windows Instance service was created with
C:\> oradim -new -sid <SID> -startmode m -pfile C:\oracle\product\10.1.0\admin\pfile\init.ora
then, you need edit this service with command like below:
C:\> oradim -EDIT -SID <SID> -spfile C:\oracle\product\10.1.0\admin\spfile<SID>.ora
Take a look on this link before make any changes:
http://www.stanford.edu/dept/itss/docs/oracle/10g/win.101/b10113/create.htm#i1006533
Cheers

Change Start-Page for the Application

Hallo,
how can I change the Start-Page for the Application ?
Thanks
I. Schult transcoject Neumünster

Another action you can take is to change the page ID in the p_flow_page argument to the wwv_flow_custom_auth_std.login call in the login process on the login page (if you have one), e.g., change P_FLOW_PAGE => :APP_ID||':1' to FLOWPAGE => :APP_ID||':99' to change the 'after login' page from 1 to 99. This will be the page (in the current application) redirected to after authentication, absent a deep link.
The home link application attribute has limited use, e.g., for determining which page to show when you use the Run Application icon in the builder.
Scott

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

How to implement tooltip for the list items for the particular column in sharepoint 2013

Hi,
I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
Any help will be appreciated

We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

How do I test for the presence of an active open document in Photoshop?

I’m new to Adobe scripting, and one of my first scripts deals with the activeDocument in Photoshop.
If there is no activeDocument, I want to display a message and terminate the script. My efforts
so far have been met with frustration. While developing the script in ExtendScript Toolkit,
I used the test expression "activeDocument in app", and everything worked as expected. And when I installed the script
in the Photoshop scripts folder and ran it from Photoshop with a document open, it also worked.
But when I ran the script from Photoshop with no document open, it failed.
Moreover, after that,the script failed when I tried to run it in ESTK.
I did some testing and found that my test expression, "activeDocument in app"
was returning true, even though no document was open.
Still in ESTK, I replaced the “app” with ”Application” in the test expression. That worked when
I stepped through the script. But when I tried to run it without stopping, it stopped at the
test expression, and displayed the error message, “Application is undefined.”
So how do I test for the presence of an open document in Photoshop ??

After posting this, I discovered the Photoshop Scripting Forum, and I found my answer there.—
I should have used “app.Documents.length” as my test expression.

How to creat deadlock for the purchase order in SAP Workflow

How to creat deadlock for the purchase order in SAP Workflow

Hi Ben,
Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date? If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
DATA: vf_doc_date(10),
             internal_date TYPE d.
     vf_doc_date = sy-datum.              "Document date.
     internal_date = vf_doc_date.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
    EXPORTING
      date_internal            = internal_date
    IMPORTING
      date_external            = vf_doc_date
    EXCEPTIONS
      date_internal_is_invalid = 1
      OTHERS                   = 2.
Regards,
Vivek

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds. If someone is calling me during that time it says mobile is either switched off or outsid

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
Please help

You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

How to start grounding for the architecture role?

Similar Messages

Maybe you are looking for