How to start GUI in ORACLE VM 10.2.0.4

Hi All,
I am using ORACLE 10.2.0.4 VM -template on OVM server 2.2.1.
This vm template having built in OS- OEL 5(oracle enterprise linux) update 2 and database 10g R2 with patchset 3 i.e. 10.2.0.4. I just unzip this tempalte file and OS with DB upto 10.2.0.4 is available for me.
Now on this VM I want to create one more database but I am not able to enable GUI.
I have already stopped firewall service. But not able to find how to start GUI. This VM dont have vncserver also.
Also I dont find any "/xdm/Xaccess " in /etc/X11., also not the /gdm in /etc.
Can any one having any idea how to?
Thanks...
Edited by: user12039625 on Jul 28, 2010 12:07 AM

Are you taking about the Oracle DBCA utility?

Similar Messages

How to start EM in Oracle Web Center?

Please guide how to start EM in Oracle Web Center?
as i am not getting emctl file in BIN Directory of Oracle Web Center Home...
Please guide and help
Thanks,
Waheed.

Hi All,
I got the solution how to start EM in Webcenter .
If in your configuration is there any other HTTP server is running then its comfilect with your current Webcenter with HTTP server installation. so try to installed only Oracle Webcenter Freamwork only...after that try to open the Application server control page with 8888, it will definately work...

How to start to use Oracle client to access Database ?

Folks,
Hello. I have just installed Oracle Client into directory /home/myOracle/Oracle_Client. But I don't know how to start and configure the client to access Oracle Database.
Can any folk tell me how to start to use Oracle client to access Database ?

user13764998 wrote:
I have earlier managed to install the Oracle Client (32-bit) in 32-bit clients and servers Oracle Client 10.
The reason that it went well before was the exellent setup and configurationprograms we got with that version.It seems you are confusing the "full" Datbase Client with Instant Client.
Now I'm trying to install the Oracle Instant Client 11g R2 both 32-bit and 64 (of the latest revision) on a 64-bit Windows 2008 Server .
I have managed to install the driver but the setup doesn't give me any Net Configuration Assistant or Net Manager to help with the configuration.What setup? Are you not using just the zip files?
What are you installing exactly, i.e. what install media (file) did you download?
So I haven't succeded in configuring it despite I I read the readme-info that comes with the Instant Client files.There's not much to configure - that's sort of the point of Instant Client. Just drop a few files in a folder, set PATH and off you go.
Doesn't <instant client dir>\sqlplus user@'hostname/servicename' work?

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

How to start GUI in SOLARIS

I recently installed SOLARIS 10 and it logged me IN automatically as "root". I wanna know how to start the GUI shell. Ma sys is P-4 3.2 with 512 DDR 266 RAM
The steps that show up are
grub loading stage2...
<options> (bootmenu)
1)Solaris 10 1/06 s10x_u1wos_19a x86
2)solaris fail (something like that-can't remmember)
3)windows
Pressed ENTER on1 and licence screen showed up.
Hostname : satyam-9665 (I entered it earlier)
checking ufs filesystem
Satyam-9665 console login
aug(date n time) Satyam-9665 sendmail[372]:My unqualified host name(local host) unknown; sleeping for retry
Starting desktop login on display:0
wait for the Desktop screen before logging in
The X Server can not be started on display:0
The screen flickered a bit here
aug(date n time) Satyam-9665 sendmail[315]:My unqualified my own domain name(local host) --using short name
After this I was in the terminal/console as "root"
PS: I made the following choices during installation.
* opted for NON-NETWORKED
* selected ENTIRE GROUP
* Hostname was given as Satyam-9665

Are you taking about the Oracle DBCA utility?

How to start manually an oracle 8i database with a bat file?

Hi all,
I know it's not the place but it is a really common question: how can i start manually an oracle 8i database on windows 2000 without using a service? I don't remember the command. I tried: oracle start SID without success...
Thanks
JMi

Dear JMD,
If you would like to startup the Oracle instance using a batch file then first create a SQL file (say ABC.SQL) wherein enter the following two lines:
connect internal/<INTERNAL_PASSWORD>
STARTUP
<INTERNAL_PASSWORD> above is the password for the INTERNAL user account (default password is "oracle")
Then create a batch file (say START.BAT) and enter the following single line:
<ORACLE_HOME>\bin\svrmgrl @<ABC_DIR>\ABC.SQL
where <ORACLE_HOME>\bin\svrmgrl is the full path of the SVRMGRL.EXE executable and <ABC_DIR> is the directory in which you have placed the ABC.SQL file.
Now you can startup the Oracle database by simply double-clicking on the START.BAT batch file.
Ciao!
null

How to start SAP and oracle on SUN SOLARIS SYSTEM

hi.
Please suggest
(Mistakenly we restarted the server when SAP is on and now SAP is not starting)
1. How to start the SAP ECC6 in sun Solaris.(version 10)
2.How to start the oracle in sun Solaris (version 10)
We are trying with
sh startsap SID
but it showing SAP SYSTEM NAME NOT FOUND
Please suggest'
Regards,

Dear Ravindra,
First start oracle :
login as orasid and login to sqlplus "/as sysdba"
and then startup and make sure that listener is up and running.
For that you can lsnrctl status, if its not started just do lsnrctl start.
After that login as sidadm and then startsap R3
If still if you face any error like system name not found.
then try as startsap R3 <hostname> or startsap SID <hostname>
Defenitely it will resolves your issue.
Thanks
Kishore

How to start GUI for VM?

Hi All,
I have OVM 2.2.1 installed on server. On top of that I have created one VM using VM-template OEL5.5. This is done successfully. Now I want to install ORACLE 11g on this VM.
For that I run "vncserver" command on this VM (console and command prompt) which gives vnc port number also but when try to login through vncviewer it's not connected.
Is there any way to start GUI for this installed vm?
Thanks...

Hi Avi,
Thanks for your reply. It works for me.
one more query for you, If you know it then please reply it.
Earlier I was using OVM Server version 2.2.0 and now in my new setup I am using OVM Server version 2.2.1. By mistake I had delete the ovs-agent-2.3 directory in my new setup (2.2.1) from /opt and my all VM getting crashed because at VM startup it looks for this ovs-agent in /opt directory.
Now, I had copied the ovs-agent-2.3 from earlier version i.e. 2.2.0 to 2.2.1. And it works. All VMs are up and running.
So I just want to make it confirm that there is no change in ovs-agent version between 2.2.0 and 2.2.1. Can you please update me?
Thanks...
Edited by: user12039625 on Jul 20, 2010 10:21 PM

How to start JVM in Oracle

Hi,
is there any way to start JVM in Oracle without restarting the Oracle instance?
I mean: I need to start the VM adding some flags, like -Djava.library.path=, so I'd like to know if there's a script (or any kind of configuration file) which has the responsibility to initialize and start the JVM, and if I could modify it...
Thanks anyway
V

Hi,
There is not explcit command to enable Java in a session, it happens transparently, the first time you run Java in the session. I use the following basic command: select dbms_java.longname('foo') from dual;
Regarding the ability to configure the per-session VM using properties/flags (such as classpath), this is currently not supported.
Kuassi

How to start with Discoverer - Oracle Apps - New Org Setup

Hi,
Our discovered expert retired and unfortunately no docs are available.It is in use for existing Operating units(11.5.10) Now i wanted to setup discoverer reports for newly setup OU;s.
How do i start with ?Any help is appreciated.
Rgds-PV

Welcome
http://www.oracle.com/technology/documentation/applications.html
You can download from here.
Regards
Asif Kabir
-- If helpful mark the post as correct/helpful, also close the thread as answered.

How to start and shutdown Oracle Applications 11i?

Currently, I've installed an Oracle Applications version 11i under Sun Solaris environment. However, I encountered problems when I tried to backup the whole system for fallback purpose. I'm not really sure about the procedures in shutting down the Oracle Applications components. So, is there anyone could tell me such procedures, hopefully including the command used for shutting down the whole application system? Thanks.
Besides, I would like to know how can I start Oracle Applications 11i as a daemon? If cannot, how can I start the server within the UNIX shell? Thank you very much.

You will have specified a common directory in your installation, which is usually referred to as COMMON_TOP.
Under <COMMON_TOP>/admin/scripts there are a host of shell scripts for stopping, starting apps components. Also, under the database Oracle Home (816 or 817) you will find an appsutil directory with similar scripts.
Typically these two directories will be in your PATH.
You can create a stop script, typically as:
adfrmctl.sh stop
adrepctl.sh stop
adfmsctl.sh stop
adfmcctl.sh stop
adapcctl.sh stop
adcmctl.sh apps/apps_password stop (wait till FND processes cease, a sleep 300 might suffice)
adalnctl.sh APPS_<SID> stop
addlnctl.sh <SID> stop
addbctl.sh stop
A start script would call the same scripts in the reverse order, substituting stop for start.

How to start of with Oracle HCM fusion applications to gain good grasp on the technology

I have been working in Siebel for a long time and I am currently moving to Oracle Fusion HCM application.I would like to know the best way to start up with it and I would also like to know the possible way to go about it so that having 7years of experience I can justify my knowledge in this technology and skill.Could anyone please guide me as to how to go about it.What are the things i should start from and how should i go about it,what forums to follow,what online tutorials to look at.
Thanks and Regards

Hi.
There are loads of resources out there, but with so many it can be hard to know where to begin. Obviously we cover just Customization-Integration related areas not the whole stack. I don't have anything specific to your Siebel background, however hopefully these "top pick" recommendations will help you. My personal advice is to pick one topic or technical component at a time, because trying to learn everything at once quickly becomes overwhelming.
1) Chapter 2 of my book, now a few years old, gives a Technical Overview of the stack. Get it for free here: http://www.oracle.com/technetwork/articles/managing-fusion-apps-418611.pdf
2) Oracle Learning Library is a good resource for demos and well-crafted content on many topics. Use the search to find Fusion Apps content: https://apexapps.oracle.com/pls/apex/f?p=44785:2:0::NO:::
3) Whilst it might seem predictable, our online help is the intended content for getting started. This was overhauled recently and the new layout really helps. Both the product docs and the help portal content is very well written by our experts. Getting Started with Oracle Fusion Applications Lifecycle Management Release 9
4) The MyOracleSupport site has quite a few bits of content on technology component usage inside Fusion Apps. Look for the "Information Centers" for applications technology or BI for example where you'll find lost of top content listed by category.
I am also working on some "resource roadmaps" - a tool to give people to all key resources for a topic in a quick and visual way. Keep an eye on our blog for more here.
Kind regards
Richard
FA Developer Relations.

How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4

I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.

I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out.

How to start learning about Oracle identity mgmt

Hi All,
I want to learn OID, Can any one suggest from where to start learning this topic and practising it.
Thnaking You,
Rakesh.

It seems a good approach, although I think SSO can be learned independently (although it can use an LDAP dir to store credentials, it can be done without learning much about it).
In all the IdM world, I think the basic start point is to learn about LDAP. And as OIM has not a ldap backend like other provisioning solutions, you will interact a lot with directories. This is the first step I always ask for people who starts working with me. SSL/TLS and certs should be studied later, gaining a complete understand of directories world.
Every Directory differs only in their own admin console, but if you use pure LDAP, all dirs are the same. OID has its things, but with strong LDAP knowledgement, there will be no problem in understand it.
OIM is the last stand, because it integrates everything. I suggest that first, you try to learn how to use it, as if you were an administrator (this can be done if you get some VM with oim preinstalled with at least 2 connectors working). Then, when you get all oim concepts (users, orgs, groups, access policies, process, etc), you can begin with implementing your own stuff, like making your own installation, deploying connectors, extending their functionality, etc.
OIM has the power of being extended with java code, so after all of it, I recommend as the very final step, to get inside the java world and begun writing your own code, decompiling the connectors code so you can figure how oim works, etc etc

How to start career with oracle

Hi All,
I am not for sure if here is right place to post my question.
Well,I want to know what skills people should have if he want to take job as ORACLE DBA or ORACLE application developer.
I have seen a lot job post on Dice.com website.They look like people need to have knowledge on many fields.I wonder If it is real or just like highest water mark.

Hi
Thanks for your reply.
The further question is what languages (except of SQL,PL/SQL) I must know and skill level ?I know C, C++, and Foxpro and littile bit of VB and Java.
Best Regards,
Henry

How to start GUI in ORACLE VM 10.2.0.4

Similar Messages

Maybe you are looking for