How to Start oracle web listener 'www'

I was able to start 'admin' listener successfully. However I am not able to start the www listener. It gives the message of "Unable to startup Oracle Web Listener 'www' and "Check NT Event log".
the NT Event Log says "The description for Event in Source Oracle_Web_Listener could not be found.It contains the following insertion string: A failure occured. (Address is already in use)When assigning a port (and then it gave me the domain name and port).
Please advise on how I should start the www listener. Thanks

Janilson wrote:
I don't know which oracle version you are using but, I use the Express version (Oracle-xe)
In order to configure it I run
sudo /etc/rc.d/oracle-xe configure
After configure oracle, I start oracle service
sudo /etc/rc.d/oracle-xe start
I don't know if it helps sad
I don't see any thing in rc.d. I use systemctl to start daemons.
stee1rat wrote:What command do you use to run it? And what are your environment variables?
lsnrctl start

Similar Messages

How to Start Oracle Report in Unix?

hi
Does anyone know how to start oracle report in unix? I was
told to try this (r60desm) but that did not work. We are on 11i
and 6i. Please help
alpha

I don't have Forms/Reports 6i for UNIX. Have you tried typing "r60" and typing tab twice?

" Starting Oracle Net Listener......." Hangs while installing vm manager

Ive taken all defaults read install guide , checked availability of ports and made sure I have libaio.
I've reinstalled on two separate machines and everytime install fails after I accept defaults. Logs don't show anything. ./oracle-xe configure is the only thing in the log.
If I run this again it fails or hangs in the same place. ?????Im not sure where the netlistener is otherwise Id try to manually install?start ?
"Starting Oracle Net Listener"

I have noticed the same thing on my install where it hangs on starting the listener. BUT. .. If you hit enter while it is hanging it will continue to the next step of starting the db. . It seems like it is waiting for some input but not displaying that on the screen. I would not suspect any input from a start listener. .This is my experience. Any others see this?

How to start Oracle Enterprise Manager(Oracle 9i) on Sun Solaris 9 platform

Hi
How to start Oracle Enterprise Manager(Oracle 9i) on Sun Solaris 9 platform and Oracle Enterprise Manager(Oracle 10G) on Sun Solaris 10 platform?
Thanks.
RJ.

I need to use it to unlock some accounts.There is a SQL command to do that
SQL> alter user <username> account unlock;
Anyway...
$ export ORACLE_SID=chucky
$ emctl start dbconsole

Failed to start Oracle Net Listener using

hi
I ' trying to configure oracle 10g in ubuntu machine. I got the following errors like
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus
when ever i try to start oracle,i have got above issue

ya .... i hav found listener.log file.
Also when i try to run this cmd # sqlplus / as sysdba
i got following error like
Error 46 initializing SQL*Plus
HTTP proxy setting has incorrect value
SP2-1502: The HTTP proxy server specified by http_proxy is not accessible
also when i stop the listener and try try to restart it again ....i got error message like
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: error creating log stream /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
Linux Error: 13: Permission denied
Listener failed to start. See the error message(s) above...

Failed to start Oracle Net Listener

Hi ,
can any body help me regarding failing of listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
iam using Fedore core4 installing oracle10g Express editon ,on standalone system,Below are the logs
sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 31 13:21:39 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name:
/etc/init.d/oracle-xe restart
Shutting down Oracle Database 10g Express Edition Instance.
Stopping Oracle Net Listener.
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
[root@localhost ~]#
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 31-AUG-2009 13:26:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 11: Resource temporarily unavailable
Listener failed to start. See the error message(s) above...
Please help

I need help please:
I have installed Oracle 10g Express Edition without struggles ( Little curious about the fact
that the directory /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/ is empty).
% /etc/init.d/oracle-xe configure --> worked good without default settings.
% /etc/init.d/oracle-xe start --> is silent : No verbose or messages in term.
I can't connect to server http://localhost:8080/htmldb or http://localhost:8080/apex.
I uninstalled and re-installed Oracle 10g... Now the command:
% /etc/init.d/oracle-xe configure --> Oracle is already configured.
But the connection to the server always fails.
My environment has all the following:
% uname -r
2.6.30.5-43.fc11.i686.PAE
% echo $ORACLE_HOME
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
% echo $ORACLE_SID
XE
% echo $PATH
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/sbin.....
BUT I also had the responses:
% /etc/init.d/oracle-xe restart
Shutting down Oracle Database 10g Express Edition Instance.
Stopping Oracle Net Listener.
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
%sqlplus
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
% /etc/init.d/oracle-xe status
/bin/su: user oracle does not exist
% lsnrctl start { Messages below are my translations into english, sorry ;-) }
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 21-FEB.-2010 18:31:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Launch /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
NL-00280: Erreur de création de la chaîne de journalisation /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
NL-00278: Impossible to open journalisation file
SNL-00016: snlfohd : File opening error
Listening process failure. Read error messages above...
I wish someone here gives some tips (with the commands, I am an apprentice); I dont know
where to begin my checks.
Thx.

How to start Forms Server listener automatically?

hi...
i use forms 5.0 on Windows NT for the web. i want to start forms
server listenner automatic same as WWW listener. because i must
logon on Windows NT before start forms server listener.
thank you very much.
jibjoi
null

Product you are looking for is called svrany.exe
and comes with tge nt3.51 resource pack which can be used
with nt4.0. I have used it and it works fine.
M. Schulze (guest) wrote:
: jibjoi (guest) wrote:
: : hi...
: : i use forms 5.0 on Windows NT for the web. i want to start
: forms
: : server listenner automatic same as WWW listener. because i
: must
: : logon on Windows NT before start forms server listener.
: : thank you very much.
: : jibjoi
: I think a forms server version which comes as a NT service will
: be (or perhaps already is) available from Oracle.
: In the meantime you can use a tool from Microsoft which is
: called service-it or something. This is also an NT-service
which
: only calls a custom executable. Check MS Technet for this
one...
null

How to start Oracle Application Server 10g on Linux

Hi,
I have installed the Oracle Appliacion server and Infrastructure server on Linux. Both I have installed under with Diff. folder
Can some one please tell me how to start / stop Appliacion server and Infrastructure server on Linux
We are going to use the these with Oracle EBS 11.5.10.2 .
Oracle EBS 11.5.10.2 installed in the same Linux server under diff. folder
Can some one please guide me.
Thanks,

You can do as rizla said or go another route.
We setup profiles to use for all of the oracle homes. Then in the scripts we call the profiles. Easier to migrate and manage in my opinion if you have multiple oracle homes. You can then use profiles when ssh'd into the boxes, too. Both ways will work.
Example:
Script which you can chkconfig.
#!/bin/sh
# oracle_collabInfra
# This shell script takes care of starting and stopping Oracle Collab Infra instance.
#chkconfig: 345 96 14
# Source function library.
. /etc/rc.d/init.d/functions
RETVAL=0
start () {
echo $"Starting Collab Suite on the Infra instance..."
echo $"Starting Listener..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; lsnrctl start"
sleep 10
echo $"Starting Metadata Repository..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; sqlplus '/ as sysdba' <<!
startup;
exit;
sleep 10
echo $"Starting Enterprise Manager Application Server Control..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; emctl start iasconsole"
sleep 5
echo $"Starting Infra OID and OC4J_Security processes..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl startproc process-type=OID"
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl startproc process-type=OC4J_Security"
echo $"Starting Infra HTTP_Server processes..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl startproc process-type=HTTP_Server"
return $RETVAL
stop () {
echo $"Stopping Collab Suite on the Infra instance..."
echo $"Stopping all Infra OPMN managed processes..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; opmnctl stopall"
sleep 5
echo $"Stopping Enterprise Manager Application Server Control..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; emctl stop iasconsole"
sleep 10
echo $"Stopping Metadata Repository..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; sqlplus '/ as sysdba' <<!
shutdown immediate;
exit;
sleep 10
echo $"Stopping Listener..."
runuser - oracle -c ". /home/oracle/.collabInfra_profile; lsnrctl stop"
return $RETVAL
restart () {
stop
start
RETVAL=$?
return $RETVAL
# See how we were called.
case "$1" in
start)
start
stop)
stop
restart)
restart
echo $"Usage: $0 {start|stop|restart}"
RETVAL=1
esac
exit $RETVAL
profile:
export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=$ORACLE_BASE/collabInfra
export ORACLE_SID=orcl
export TMP=/tmp
export TMPDIR=/tmp
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=/bin:/usr/bin:/usr/sbin:/usr/bin/X11:/usr/kerberos/bin:/usr/local/bin:/usr/X11R6/bin:$HOME/bin:$ORACLE_HOME/bin:$ORACLE_HOME/opmn/bin:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/backup_restore
unset USERNAME

How to start oracle 11g?

Hi, I just did an installation of oracle 11g on my fedora 9. The db installed ok and I managed to connect as sys using sqldeveloper. After reboot, the database doesn't start automatically (which is what I want). But I don't know how to start it!!!
I looked around the net and I currently execute these commands:
cd /home/ariskk/programs/oracle/ariskk/product/11.1.0/db_1/bin/
export ORAENV_ASK=NO
export ORACLE_SID=orcl
#replace orcl above with the SID in whose ORACLE_HOME you find the listener
. oraenv
unset ORAENV_ASK
./lsnrctl start
./dbstart $ORACLE_HOME
but when I try to connect I get the following error:
ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
My connection descriptor is correct because it was working before rebooting.
Also I am not able to run em. Again, em was running correctly before rebooting (URL: https://localhost.localdomain:1158/em/ was working fine before the reboot)
Any help would be appreciated.

ariskk,
Once you have set your ORAClE_SID=ORCL or whatever your database name iis as an oracle user. Do following and post its output here? For readability enclose your code or output between \.To Start database
$> sqlplus '/as sysdba'
$> startup;
To Start Listener
$> lsnrctl status
$> lsnrctl start
To start database control
$> emctl status dbconsole
$> emctl start dbconsole
Regards
Edited by: OrionNet on Jan 8, 2009 4:25 PM

How to install Oracle Web toolkit

Hi,
I wantto install Web toolkit on Win2k server machine. I'm using oracle 9i rel. 2 .do i have install Ä°AS ?? how can install the web toolkit ?
thanks in advance

Kashif,
it does NOT help to ask the same question 3 times in 3 different entries, nor will you receive extra credits for it..
searching on OTN came up with this link..
http://www.oracle.com/technology/tech/java/newsletter/august05.html
and this as the product site
http://www.oracle.com/technology/products/webservices_manager/index.html
right side, search down, link to 10.1.2.0.2 download
accept the terms and conditions .. and scroll down to download
this brings you to
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
and then search for Web Services Manager

How to start the SCAN listener on new 11Gr2 install?

Ok...starting dbca on first RAC install on the new 11Gr2 cluster.
I was about to proceed from screen 3 to 4...and it comes up with an error saying the SCAN listener hasn't been started.
I started what I thought was the listener with lsrnctl start...but apparently that isn't enough.
What do I do to start the SCAN listener? I'm still a bit hazy on what this is for.....
Thanks in advance,
cayenne

Man..there just is NOT a lot of good, easy to find direct documentation on this.
I found this document that had some srvctl instructions:
How to update the IP address of the SCAN VIP resources (ora.scan.vip) [ID 952903.1]
And from there...I tried experimentingL
# $GRID_HOME/bin/srvctl stop scan_listener
# $GRID_HOME/bin/srvctl stop scan
# $GRID_HOME/bin/srvctl status scan
I did:
[oracle@node1 bin]$ ./srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is not running
SCAN VIP scan2 is enabled
SCAN VIP scan2 is not running
SCAN VIP scan3 is enabled
SCAN VIP scan3 is not running
[oracle@node1 bin]$ ./srvctl start scan
[oracle@node1 bin]$ ./srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node node5
SCAN VIP scan2 is enabled
SCAN VIP scan2 is running on node node3
SCAN VIP scan3 is enabled
SCAN VIP scan3 is running on node node4
Trying to start the scan listener:
[oracle@node1 bin]$ ./srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is not running
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is not running
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is not running
[oracle@node1 bin]$ ./srvctl start scan_listener
[oracle@node1 bin]$ ./srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node node1
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node node3
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node node4
So...it appears I figured how to get scan and the scan listener running.
I'm guessing I need to do some form of the srvctl add....I found this:
http://download.oracle.com/docs/cd/E11882_01/rac.112/e10718/srvctladmin.htm#CDDEEBCH
On it, I found the generic instructions for add:
srvctl add scan
Adds Oracle Clusterware resources for the given SCAN. This command creates the same number of SCAN VIP resources as the number of IP addresses that SCAN resolves to, or 3 when network_number identifies a DHCP network and Oracle GNS configuration.
Note:
This command is only available with Oracle Clusterware.
Syntax and Options
Use the srvctl add scan command with the following syntax:
srvctl add scan -n scan_name [-k network_number]
[-S subnet/netmask[/if1[|if2|...]]]
Table A-14 srvctl add scan Options
Option Description
-n scan_name
A fully qualified host name, which includes the domain name.
-k network_number
The optional network number from which SCAN VIPs are obtained. If not specified, the SCAN VIPs are obtained from the same default network from which the nodeapps VIP is obtained.
-S subnet/netmask
[if1 [|if2|...]]
Creates the network_number. This option must be specified when network_number does not exist.
Example
An example of this command is:
# srvctl add scan -n scan.mycluster.example.com
srvctl add scan_listener
Adds Oracle Clusterware resources to the SCAN listeners. The number of SCAN listener resources created is the number of SCAN VIP resources.
Note:
This command is only available with Oracle Clusterware.
Syntax and Options
Use the srvctl add scan_listener command with the following syntax:
srvctl add scan_listener [-l lsnr_name_prefix] [-s]
[-p "[TCP:]port_list[IPC:key][NMP:pipe_name][TCPS:s_port] [SDP:port]"]
Table A-15 srvctl add scan_listener Options
Option Description
-l lsnr_name_prefix
The SCAN listener name prefix.
-s
Use the -s option to skip checking of the ports.
-p "[TCP:]port_list
[IPC:key][NMP:pipe_name]
[TCPS:s_port]
[SDP:port]"
Protocol specifications for the listener. port_list is a comma-delimited list of TCP ports or listener endpoints.
If this option is not specified, then the default TCP port of 1521 is used.
Example
An example of this command is:
# srvctl add scan_listener -l myscanlistener
So, if I understand this correctly, to get scan and scan listener to autostart on boot I do something like this?
If my SCAN name is database-scan
I'd need to do srvctl add scan -n database-scan ?
For the scan listener, from the instructions it sounds like I can name it anything I want...is that correct...?
So I could do something like
srvctl add scan_listener -l fred ?
Thanks in advance for any suggestions. (Ok, not going to really name it fred)
cayenne

How to start Oracle Report Builder in Linux

Hi all
Can someone please help by telling how can i start Oracle Report Builder in Linux????
Thank you and best regards to all

Hello,
there should be a script rwbuilder.sh
in ORACLE_HOME/bin for 10.1.2.
in ORACLE_INSTANCE/config/reports/bin for 11g
Of course, you need to have a "X Display Server " up and running and the variable DISPLAY must be set to this "X Display Server "
Example :
export DISPLAY=123.456.789.12:0
$ORACLE_HOME/bin/rwbuilder.sh
Regards

How to start Oracle database in solaris Machine

I installed Oracle database in my solaris machine. Everything went fine .. I was able to install it and test the database if it's working or not.
Something happened that made me shut down and restart the solaris machine, the problem is that Oracle is not running, so I have to start it manually, and I'm not sure how to do that ... Is there a way to start Oracle automatically once the solaris machine is started ...
I'm using the SSH Secure Shell Client to configure and install everything into the solaris machine ..

Here is the work around for starting oracle instance automatically.
1) logon the system as root user.
2) under /etc/init.d/ directory, create a file name oraclestart(name the file to what you feel comfortable). eg: /etc/init.d/oraclestart.
with the following content:
#!/bin/sh
# Created by Henry Nguyen
# Date 10/11/2005
# Script to automatic start and stop oracle instances on server
ORACLE_HOME=/export/home/oracle/product/9.2.0.1.0 (diffrent on your system)
if [ ! -f $ORACLE_HOME/bin/dbstart || ! -f $ORACLE_HOME/bin/dbshut ]; then
echo missing oracle start/stop script
exit 1
fi
case "$1" in
'start')
su - oracle -c '$ORACLE_HOME/bin/dbstart'
su - oracle -c '$ORACLE_HOME/bin/lsnrctl start'
'stop')
su - oracle -c '$ORACLE_HOME/bin/lsnrctl stop'
su - oracle -c '$ORACLE_HOME/bin/dbshut'
esac
3) create 2 soft link as following:
ln -s /etc/init.d/oraclestart /etc/rc2.d/S99oraclestart
ln -s /etc/init.d/oraclestart /etc/rc0.d/K10oraclestart
Note the S99 and K10: that are Solaris priorities to when start and stop an oracle instance and those letter must be capitalized.
Hope this will help you

Starting Oracle 8i listener when under stand alone Windows NT 4.0 workstation.

Hi,
I am finding it difficult to start oracle listener under a stand alone Windows NT4.0 workstation. My NT machine is stand alone and not connected to any n/w. Since I was not able to bring up listener, I was not able to create any database. I have installed Oracle8i Enterprise Edition on my machine. Please help.
-- Shesha

Dear Philip,
I have attached the listener.ora and tnsnames.ora.
listener.ora
# LISTENER.ORA Network Configuration File: D:\Oracle\Ora81\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS = (KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ASHWIN)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = ASHWIN)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\Oracle\Ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ashwin.sheernali)
(ORACLE_HOME = D:\Oracle\Ora81)
(SID_NAME = ashwin)
tnsnames.ora
ASHWIN.SHEERNALI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ASHWIN)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ashwin.sheernali)
Also, I am getting the following error messages when tried with "lsnrctl start" command at command prompt.
TNSLSNR for 32 bit Windows version 8.1.6.00 - Production
System parameter file is D:\Oracle\Ora81\network\admin\listener.ora
Log Message written to D:\Oracle\Ora81\network\log\listener.log
Listening on (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0IPC)))
Attempted to listen on (DESCRIPTION=(ADDRESS=(KEY=EXTPROC0)))
TNS-12538: TNS: no such protocol adapter
TNS-12560: TNS: protocol adapter error.
TNS-00508: No such protocol adapter.
Thanks for everything.
I will use the simplest forms of listener.ora and tnsnames.ora, as suggested in your mail and try tonight.
-Shesha
null

How to start Oracle Enterprise manager

Hi,
I installed the Oracle 10g, but I cann't start OEM. How to start OEM?

I have similar problems. I have removed and installed Oracle twice to see if that would help. Every time I am able to actually start OEM, but when I reboot the PC it stops functioning. The two first times OEM was to be found at http://PJMOBILE:5500/em/ and the third time at http://localhost:5500/em/. I wonder why its different.
So I read the previous notes on this issue with great interst. I tried the different advises but with out success.
When I typed "emctl" I got the message "EM Configuration issue. C:\oracle\product\10.1.0\Db_1/PJMOBILE_global not found."
WHen I types "emctl start dbconsole" I got the message "OC4J Configuration issue. C:\oracle\product\10.1.0\Db_1/oc4j/j2ee/OC4J_DBConsole_PJMOBILE_global not found."
In both cases it looks for files in a path name based on my computer name PJMOBILE as opposed to based on "localhost". These directoriues are not there but their localhost counterparts are.
So it seems to me that rebooting my machine has caused some environment variable to be erased.
I hope this adds to the analysis of matters.
Best regards
/poul-jørgen

How to Start oracle web listener 'www'

Similar Messages

Maybe you are looking for