How to start replicat with mising table in target

Hi,
when I start replicat, i got the error below
2011-10-21 15:28:30  ERROR   OGG-00199  Oracle GoldenGate Delivery for Oracle, rep1.prm:  Table SIEBEL.S_SRM_TASK_HIST does not exist in target database.
2011-10-21 15:28:30  ERROR   OGG-01668  Oracle GoldenGate Delivery for Oracle, rep1.prm:  PROCESS ABENDING.because I forgot to skip the table at the extract
how can I start replicat ? (without the table I don't need)
below my param for replicat
replicat rep1
setenv (oracle_sid=T3W)
userid ogg,password ogg_pwd
handlecollisions
assumetargetdefs
discardfile /tst/data/ogg/discards/resp.dsc,purge
reperror default discard
map SIEBEL.*, target SIEBEL.*;

You need to exclude/skip/ignore the table (obviously), but how/where to do that?
Exclude the table in the extract:
Replicat doesn't start
extract exxx
setenv ...
userid ..., password ...
--other options
tableexclude siebel.name_of_table_you_want_to_exclude;
TABLE SIEBEL.*;
Note that the exclude comes before the wildcarding used in the TABLE clause. Piece of cake.

Similar Messages

  • HOW TO START OFF WITH J2ME

    Hi ,
    i'am a beginner.i'am in the initial stages of my carrer in mobile industry.
    i'am well versed in java.
    i want to learn J2ME.i'am unable to know the starting point.
    Anyone, please guide me how to start off with learning J2ME.
    desperately waiting for a reply..
    Thanx,

    this forum is for web services, but not j2me. several suggestions:
    1. go to j2me forum
    2. download a j2me wireless toolkit
    3. read articles about j2me on this site

  • How to start working with iReport?

    Hi All,
    I'm just decide to use iReport for create report on Web but I don't know
    How to start working with iReport , What program I should to install , How
    to config any system files and set property .
    Please advice me for work with IReport.
    Thank you

    Hi,
    best hint to give is to start interviewing the product owner
    http://ireport.sourceforge.net/cap3.html
    Note that this is an open source project. Once you know which libraries you need, create a project in JDeveloper and double click on the project node. There is a Library node that allows you to import libraries to be used in your code.
    Under Tools --> Manage Libraries you can configure JSP tag libraries if required
    Frank

  • How to start weblogic with jdk1.4.0

    anybody can tell how to start weblogic with jdk1.4.0 correctly?

    "jacky" <[email protected]> wrote in message news:<[email protected]>...
    anybody can tell how to start weblogic with jdk1.4.0 correctly?Take a look at:
    http://www.genuitec.com/products/JDK14_WLS61.pdf

  • How to start workin with WebLogic 11g

    Hi!.
    can anyone out there guide me with how to start working with Weblogic..
    i have made a jsp page but cant deploy it.. actually i know how to on Weblogic 8 but not on this version of the S/W...
    Please give a detailed guiding about where to paste the jsp , servelets ant other pages in my folder because i cant find out where i have to paste the files to deploy them... and i cant find the weblogic builder...
    Please..

    Developing and deploying of web applications/ Enterprise applications remains the same as in wls 81.
    Please refer the following doc for deployment : http://download.oracle.com/docs/cd/E12839_01/web.1111/e13702/understanding.htm#i1051084
    For developing web application pls refer : http://download.oracle.com/docs/cd/E12839_01/web.1111/e13712/basics.htm#i153628
    Hope this helps.

  • [SOLVED] How to start JACK with KDE 4? (and which JACK should I use?)

    Hi again
    I'm using KDE 4, and I've just installed JACK again, and since I can't find any decent documentation on this, I'm having a bit of a problem.
    Currently I have jack from [extra] installed, rather than jack2. When I try starting jack as the ArchWiki suggests, i.e. by typing "jackd -d alsa", I get the following error:
    $ jackd -d alsa
    jackd 0.120.1
    Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
    jackd comes with ABSOLUTELY NO WARRANTY
    This is free software, and you are welcome to redistribute it
    under certain conditions; see the file COPYING for details
    could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
    JACK compiled with System V SHM support.
    loading driver ..
    creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
    control device hw:0
    the playback device "hw:0" is already in use. Please stop the application using it and run JACK again
    cannot load driver module alsa
    I've also tried jack2 from [community], and after starting it with "jack_control start", I get this...
    $ jack_control start
    --- start
    DBus exception: org.jackaudio.Error.Generic: Failed to start server
    So how do I start it? I'm guessing jack doesn't want to start because some other KDE application grabbed alsa before jackd (but I've been wrong before), and I don't have the slightest idea what jack2 is about with that "generic" error. If anyone would help me shed some light on this, I'd appreciate it a lot.
    Thanks in advance!
    Last edited by Wintershade (2011-03-26 19:22:08)

    @schivmeister thanks that one worked
    Yes, it was knotify4. So now this part works. I've switched to jack2 and it works flawlessly when starting it with jackd
    So this part is solved... now, would you be so kind (if you know) as to point me to some tutorials or howtos (or proper documentation, cos I can't find much of that either) on how to connect various ALSA channels with JACK?
    Basically, I want to route my PCM channel and the Mic channel into Capture 1 (or one to Capture 1 and other to Capture 2), since my Intel HDA audio card doesn't have the "Mix" or "What-U-Hear" or whatever as an available capture source. Any leads on that? (or do I have to open another thread for it?)
    TIA

  • How to start of with Oracle HCM fusion applications to gain good grasp on the technology

    I have been working in Siebel for a long time and I am currently moving to Oracle Fusion HCM application.I would like to know the best way to start up with it and I would also like to know the possible way to go about it so that having 7years of experience I can justify my knowledge in this technology and skill.Could anyone please guide me as to how to go about it.What are the things i should start from and how should i go about it,what forums to follow,what online tutorials to look at.
    Thanks and Regards

    Hi.
    There are loads of resources out there, but with so many it can be hard to know where to begin. Obviously we cover just Customization-Integration related areas not the whole stack. I don't have anything specific to your Siebel background, however hopefully these "top pick" recommendations will help you. My personal advice is to pick one topic or technical component at a time, because trying to learn everything at once quickly becomes overwhelming.
    1) Chapter 2 of my book, now a few years old, gives a Technical Overview of the stack. Get it for free here: http://www.oracle.com/technetwork/articles/managing-fusion-apps-418611.pdf
    2) Oracle Learning Library is a good resource for demos and well-crafted content on many topics. Use the search to find Fusion Apps content: https://apexapps.oracle.com/pls/apex/f?p=44785:2:0::NO:::
    3) Whilst it might seem predictable, our online help is the intended content for getting started. This was overhauled recently and the new layout really helps. Both the product docs and the help portal content is very well written by our experts. Getting Started with Oracle Fusion Applications Lifecycle Management Release 9
    4) The MyOracleSupport site has quite a few bits of content on technology component usage inside Fusion Apps. Look for the "Information Centers" for applications technology or BI for example where you'll find lost of top content listed by category.
    I am also working on some "resource roadmaps" - a tool to give people to all key resources for a topic in a quick and visual way. Keep an eye on our blog for more here.
    Kind regards
    Richard
    FA Developer Relations.

  • How to start working with BPEL[SOLVED]-but someone still can help me :)

    Hello Everyone,
    I'm Fizzz, I'm totally new to BPEL. I don't know where to start and how to start.
    Right now I'm Working with JDeveloper 11g R1. I didn't go further yet but Now i have to create some BPEL Process that can be integrated to my Web Application. There are some transaction to be Approved or Canceled from BPEL and if Transaction is Approved then i need to Update that Transaction to Peoplesoft's Database. I have 1 week to learn it. and then i need to start my work.
    But i really don't know where to start? What do i need? And how to proceed?
    Can Anybody suggest me the steps that i can follow to get Start with BPEL and done with Peoplesoft connectivity?
    I would really appreciate your help.
    Thanks,
    Fizzz...
    Edited by: Fizzz on Nov 24, 2009 5:14 PM

    Thanks user11082822 and Vivek..
    Your Oracle Doc links are really very helpful. i would definitely go through these docs to get familiar with BPEL, But i have only one week to understand this part of technology.
    So would request for any Live Example or How to's for Sample BPEL app creation and integration part of that. I would definitely read these document but i need some fast overview on these processes practically.
    Can you please suggest me such things.
    Thank you very much to both of you for your very quick and very helpful effort. :)
    Fizzz...

  • How to start working with a Development Component

    Hi Guys,
    Till now I was working with the local development of WD. I was the only one working so I created a local project and use to deploy to the J2EE Engine.
    Now we have got the full NWDI (Netweaver Dev Infrastructure).
    I want to know exactly how to start working and creating Projects now that the work is not local. I may need to use 1 DC inside another.
    A Development Component is to be created in the CMS and Checked into DTR. From the DTR I check in into my workspace. This is all i know
    Can someone tell me exact steps of how to start the work.
    Thanks for your support

    Hello,
    I believe you have already setup NWDI correctly and its running fine.
    So here is link of a step by step guide.
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/2656405aff1e24e10000000a1550b0/content.htm
    If you want to migrate your existing WD Projects to DC Projects, here is a link for "how to" do the same.
    http://help.sap.com/saphelp_nw04/helpdata/en/9e/1c200ac164cf4a942f2dacdf3359e9/frameset.htm
    If you want to create an external utility library containing some jar files which you want to use in your DC, follow this excellent blog by Valery.
    /people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro
    Hope this is good enough for you to start with.
    Regards,
    Shubham

  • How to start working with fresh hyperion essbase 11.1.2.2

    Hi Experts,
    I have installed and configured hyperion 11.1.2.2 with below component
    1.Essbase
    2.HFM
    3.HFR
    4.Weblogic
    5.Oracle HTTP Server
    Now I want to start working with hyperion Essbase but not getting a proper way to start from where, its totally different from 11.1.3 which I used previously,
    So please help me which services to start with sequence and how to login into Essbsae console/studio to create new database with steps
    Thanks in advance

    If you want to use the standalone clients then you will need to install them separately, all the clients are available in the clients package which can be downloaded.
    It is also possible to use the EAS web console but the port you connect will depend on how you have configured the system, for example
    EAS deployed to own managed server - http://<servername>:10080/easconsole/console.html
    EAS deployed to one managed server - http://<servername>:9000/easconsole/console.html
    or you can use the http server port 19000, 9000 depending on the http server deployed.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to start dhclient with systemd at startup? [SOLVED]

    I have eth0 connected to DHCP server and want to use dhclient instead of dhcpcd. How can I start dhclient with systemd? Is there something similar to
    systemctl enable dhcpcd@eth0
    Last edited by mpelikan (2012-12-18 13:43:28)

    dhcpcd comes in package with completed systemd unit (/usr/lib/systemd/system/dhcpcd.service and /usr/lib/systemd/system/[email protected]) by package developer, but dhclient doesn't.
    mpelikan, you should write your own systemd unit for dhclient for yourself using
    1) dhcpcd units as example
    2) wiki page https://wiki.archlinux.org/index.php/Sy … vice_files
    3) man page for dhclient to get the right options
    Also I'm sure I saw somewhere an example of dhclient unit but I can't find it now. Anyway, it was not working out-of-box in Arch.
    I've done this previously but then I've realized disadvantages of dhclient (so I've removed it).
    Firstly, I didn't like how it's working in daemon-mode after some testing.
    Secondly, it depends on deprecated net-tools.
    You should try dhcpcd. If it doesn't work, you can make it work by editing configuration files / kernel options (like switching off IPv6 if you think you have an issues with it) or adding some parameters.

  • How can I replicate a source table that doesn't have any primary keys?

    We have transactional replication setup in our workplace.
    In the source database, there are some tables that do not have any primary key.
    1) How can I get these tables to replicate in the current scenario?
    2) Is it possible to introduce foreign elements in a replicated instance of the database?
    Example, additional records in a table that don't exist in the source or additional tables in the database?

    1) You need to add a primary key to this table. There must be a criteria that the app uses to identify which row it wants to up date or delete. If not you might be able to add an identity column to the table and then add a primary key to it. If this is not
    possible you might want to use snapshot replication or CDC to do change tracking and then something like SSIS or service broker to move the change to the destination server.
    2) yes, but be careful. They should not modify the schema or the data of tables which are being replicated.
    looking for a book on SQL Server 2008 Administration?
    http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
    http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

  • How to start Indesign with JS

    To start Indesign and create a new document with VBS I use this code:
    Set myInDesign = CreateObject("InDesign.Application.CS3")
    Set myDocument = myInDesign.Documents.Add
    With JS the second line will be:
    var myDocument = app.documents.add();
    but how I can write the JS code for the first line?
    Thanks

    For Adobe products, ExtendScript (Adobe's JS flavor) only executes inside the context of a running Adobe application. The only outside connectivity is through BridgeTalk, which is accessible only from another Adobe application or an Air application.
    Bob

  • How to clone data with in Table with dynamic 'n' number of columns

    Hi All,
    I've a table with syntax,
    create table Temp (id number primary key, name varchar2(10), partner varchar2(10), info varchar2(20));
    And with data like
    insert itno temp values (sequence.nextval, 'test', 'p1', 'info for p1');
    insert into temp values (sequence.nextval, 'test', 'p2', 'info for p2');
    And now, i need to clone the data in TEMP table of name 'test' for new name 'test1' and here is my script,
    insert into Temp  select sequence.nextval id, 'test1' name, partner, info from TEMP where name='test1';
    this query executed successfully and able to insert records.
    The PROBLEM is,
    if some new columns added in TEMP table, need to update this query.
    How to clone the data with in the table for *'n' number of columns and*
    some columns with dynamic data and remaining columns as source data.
    Thanks & Regards
    PavanPinnu.
    Edited by: pavankumargupta on Apr 30, 2009 10:37 AM

    Hi,
    Thanks for the quick reply.
    My Scenario, is we have a Game Details table. When ever some Game get cloned, we need to add new records in to that Table for the new Game.
    As, the id will be primary key, this should populate from a Sequence (in our system, we used this) and Game Name will be new Game Name. And data for other columns should be same as Parent Game.
    when ever business needs changes, there will be some addition of new columns in Table.
    And with the existing query,
    insert into Temp (id, name, partner, info) select sequence.nextval id, 'test1' name, partner, info from TEMP where name='test'_
    will successfully add new rows but new added columns will have empty data.
    so, is there any way to do this, i mean, some columns with sequence values and other columns with existing values.
    One way, we can do is, get ResultSet MetaData (i'm using Java), and parse the columns. prepare a query in required format.
    I'm looking for alternative ways in query format in SQL.
    Thanks & Regards
    PavanPinnu.
    Edited by: pavankumargupta on Apr 30, 2009 11:05 AM
    Edited by: pavankumargupta on Apr 30, 2009 11:05 AM

  • How to test issue with accessing tables over a DB link?

    Hey all,
    Using 3.1.2 on XE, I have a little app. The database schema for this app only contains views to the actual tables, which happen to reside over a database link in a 10.1.0.5.0 DB.
    I ran across an issue where a filter I made on a form refused to work (see [this ApEx thread| http://forums.oracle.com/forums/message.jspa?messageID=3178959] ). I verified that the issue only happens when the view points to a table across a DB link by recreating the table in the local DB and pointing the view to it. When I do this, the filter works fine. When I change the view back to use the remote table, it fails. And it only fails in the filter -- every other report and every other tool accessing the remote table via the view works fine.
    Anyone know how I can troubleshoot this? For kicks, I also tried using a 10.2.0.3.0 DB for the remote link, but with the same results.
    TIA,
    Rich
    Edited by: socpres on Mar 2, 2009 3:44 PM
    Accidental save...

    ittichai wrote:
    Rich,
    I searched metalink for your issue. This may be a bug in 3.1 which will be fixed in 4.0. Please see Doc ID 740581.1 Database Link Tables Do NoT Show Up In Table Drop Down List In Apex. There is a workaround mentioned in the document.
    I'm not sure why I never thought of searching MetaLink, but thanks for the pointer! It doesn't match my circumstances, however. The Bug smells like a view not being queried in the APEX development tool itself -- i.e. the IDE's coding needs changing, not necessarily those apps created with the IDE.
    I'm working on getting you access to my hosted app...
    Thanks,
    Rich

Maybe you are looking for

  • Duplex Printing with subreports - Help!

    Post Author: Gretchdv CA Forum: General I'm having trouble getting the final section of my report to print correctly for 2 sided printing.  The trouble comes when I have not only forced a new page, but also reset the page number.  Because the page nu

  • Downloading Adobe Reader 9.0 to no avail ....

    I am trying to install adobe reader 9.0 for windows vista premium 32 bit version on my computer using internet explorer 7.0. However eveytime I try to download it from adobe the download freezes in under a second and explorer resets itself. If I then

  • DIV Style background image not showing

    Hey Friends - can anyone take a look at line 136 to show why my background-image is not showing in this DIV Style? http://www.gratefulcreative.com/Andre_Madiz/index.html Thanks in advance! ken d creative director grateful creative www.gratefulcreativ

  • How can I update my ipod touch from 5.0.1 software to 5.1 ?!

    If u know just tell me abut it because i can not open safari,apps,etc... i want the new software because i want siri.

  • Oracle Policy Automation 10.2.0

    Oracle Policy Automation 10.2.0 is now available via Oracle E-Delivery (http://edelivery.oracle.com/) This release includes updated media packs for Oracle Policy Modeling and the Oracle Policy Automation runtime for both Java and Microsoft .NET Frame