How to start SNMP on LDAP Dir. server ? Is that runs on port 161 ?

When I click 'SNMP' tab on configuration it says "The snmp service has been started" But when I try to stop or restart it says, "Error occured while stop/restating subagent. Check the configuration data you entered"
Where do I check the config. data ?
Do I need to enable somewhere snmp ???
I want to browse the SNMP mib from our App.
For that I'm trying to run the snmp agent on dir. server.
any help ?
Thanx,
Ramesh//

The SNMP services can be stoped from the configuration tab but that does not stop the SNMP subagent it has to be explicitly stoped if Ur running from windows machine go to the control panel and stop the services.
If U'r running the Directory server from unix host the hostname where the master agent resides and the port no is must for the subagent to contact.
Regarding the port no SNMP is running if Ur using unix host check the /etc/services file for the port no for SNMP services.

Similar Messages

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

How can i get my Ipad to download videos that run on flash

how can I get my IPad to download videos that run on flash

You don't.
Adobe does not make a flash player for ipad.
Do a forum search as this is discussed over and over and over and over and over again on these forums.

How to start new instance of Application server 6.0 sp3 on Solaris

Hi!
I am a new user of iPlanet Application server (ver. 6.0 sp3) for Solaris and I have problems with starting new instance of App. Server. Directory server and administration server are started during installation but application server isn't started. I've used Application Server Command Line Utilities to start server but I've got message "you must register
the server instance via the application server admin tool". I've tried to do that but I don't know how. I've searched documentation and I haven't found what I'm looking for.I would like to know where can I find instructions for starting App. server?

Hello,
Start your "ksvradmin" from $IASHOME/bin/ksvradmin tool - a GUI tool and under file menu register the server instance by supplying port on which the server is running.. it is intuitive..
Thanks
Sudhir

How to start two instances of InDesign server independently?

Hello,
we have a multi instance InDesign server installation.
And we are able to start two instances of InDesign server on different ports.
But now we would like to use different plugins for different instances.
Is it possible somehow? For example install InDesign server two times in different folders or something like that?
Thank you in advance.

InDesign plugin loading can be controlled via a file "PluginConfig.txt", refer to search for details.
InDesign Server has separate configuration folders per instance/configuration.
*If* the search path for the PluginConfig.txt falls into this folder, that would be the easiest approach.
I don't have a server installation with me to try it out.
Dirk

How to start IP Filter in DNS server

I am using Solaris 10 x86 05/08.
In this server sun Java Messaging server and DNS server is running.
I want to start IP Filter to this server. I can allow allth ports that nessosary to Mail server.But although i enable the TCP/UDP 53 port to DNS we cant resolve the domain names.
Can any one help please...

# Block any packets which are too short to be real
block in log quick all with short
# Allow all traffic on loop-back
pass in quick on lo0 all
pass out quick on lo0 all
# Allow ICMP
pass in quick proto icmp all keep state
pass out quick proto icmp all keep state
# Allow DNS traffic
pass in quick proto tcp/udp from any to any port = domain keep state
pass out quick proto tcp/udp from any to any port = domain keep state
pass in quick proto tcp/udp from any to any port = domain with oow
pass out quick proto tcp/udp from any to any port = domain with oow
blobk return-icmp(net-unr) in proto udp all
block in log
block out log

How Auto starting Physical Standby Database ( when Server Restart)

Dear All(s)
I have configure oracle (10.2.0) dataguard on production database, some time server restart due to power disconnectivity, i want to restard dataguard when server restart. i am using Server 2003 32bit. Guide me how i can run following commands when server restart.
SQL> connect/as sysdba
SQL> Startup mount;
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
Thanks in Advance

i want to run these command each time when server restart.Yes, I did understand that... but what's the problem ? can't you schedule a task when the server starts ?

How to start Sun Java System Application Server 9.0

yesterday morning i downloaded the software from sun.java.com and installed it .but i failed in starting the application server on my system(windows). i read the quick start guide and followed the steps : <From the Start menu, choose Programs => Sun Microsystems => Application Server PE 9 => Start Default Server. > the first try the message appeared in the command window is <domain listens on at least following ports for connections:[8080 8181 4848 3700 3820 3920 8686 ]> . i tried it later for several times ,but i got a same answer [b]<the domain (domain1) is already running .cli156 could not start the domain domain1> . both of the two answers are different from the message shows in the Guide . finally i failed . i hope someone can help me , i will really appreciate it .
sent by :
meansun

dear skgaju,thank you very much ! but i am still in the trouble. i failed in the step http://<IP>:port/ whether i typed the port number 4849 or 4848 . and then i try to open domain.xml. but it shows [the system can not find the appointed object and something wrong when system deals with the resource : of 'http://www.sun.com/software/appserver/dtds/sun-domain_1_2.dtd' . i puzzled. could you tell me what's wrong with my machine?

How to start developing forms with weblogic server???

I am a beginner. I saw someone working on developer 6i and I love the ease so I come to oracle. BUT now I find this weblogic server for desktop applications (forms) too.
1. Please recommend me a book for developing desktop applications in weblogic server.
2. Is it possible to use Mysql as database while developing forms in weblogic server?
Many thanks

I am a beginner. I saw someone working on developer 6i and I love the ease so I come to oracle. BUT now I find this weblogic server for desktop applications (forms) too.You have to keep in mind that Oracle Developer Suite 6i (Forms/Reports) is over 10 years old and was primarily a Client/Server development environment. Yes, a Forms 6i application could be deployed to the web, but infrastruction has changed many times in the 10+ years since Forms 6i was introduced.
1. Please recommend me a book for developing desktop applications in weblogic server.Are you talking about an Oracle Forms application deployed through the WebLogic application server? If so, take a look at Developing Oracle Forms Applications or Oracle9i Developer: Developing Web Applications with Forms Builder. These are older books, but they will give you the basics of Oracle Forms development. Once you have the basics of Forms Development, then you can refer to the product documentation for specifics on the particular version of Forms you are using:
Oracle Forms 10g Online Book - Contents or <a href="http://download.oracle.com/docs/cd/E12839_01/index.htm>Oracle Fusion Middleware Documenation LIbrary</a> and select the Portal, Forms, Reports and Discoverer option.
{quote2. Is it possible to use Mysql as database while developing forms in weblogic server?{quote
You can use MySQL with your web app only if you are not using Oracle Forms! Oracle Forms will only communicate with an Oracle Database. There are methods available to access data from non-Oracle database, but they involved linking your Oracle Database to the non-Oracle database and accessing the data through the Oracle Database.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to start jdk1.4.2 application server

Hello:
am using jdk1.4.2 on fedora core 1. I need to set up my default application server that comes with j2sdk1.4.2. could any one guide me with those steps...
my path is eg, /shan/jdk/bin
Thanks
Shan
[email protected]

There is no "default application server" in the J2SDK - that's just plain Java. Mind you, I'm not trying to be nasty here, but since you didn't know that, don't you think your e-mail address is a bit misleading?

How to start a process via web service with automatically run first screen

Hi guys,
we want to start the process via web service and skip the inbox presentation of the first human activity of the process. It means that the first activity should start automatically by clicking the link (wsdl link).
Is there any opportunity to realize this thought?
THX
Regrads
Phil

Hi Phil,
You may refer to my blog series for steop by step procedure on how to initiate a BPM workflow through webservice. Below are the links:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
/people/arafat.farooqui/blog/2010/06/23/introduction-to-sap-netweaver-bpm-part-5
Hope this helps!!
Regards,
Arafat

How to start over with Time Machine (because drive is running out of space)

I have a 500 gig drive attached to my iMac. Time Machine's been running for ages. TM has finally depleted the drive of most space. Should I throw out some of the older folders in the backup folder for TM, or chuck the entire folder and restart TM fresh. (Nothing terribly crucial to save recently.)
Thanks.

Unfotunately my time machine backup gets to near the end and says "there is not enough space to do this backup" Neither excluding files nor waiting for it to kick out old files seems to solve the problem. I am stuck it would seem unless I erase the whole backup and start over. I didn't think I would have to do this.

Rent a movie and do not know how to start it .. there is no button that says rent .... or see. Since the beginning?

It's so simple to rent a movie ... but not to be downloaded and not as log ... should be very simple.
1 Video rented .... click .... and Begin!

Hi Warnsix,
If you have questions about how to rent or play a movie through iTunes, you may find the following article helpful:
Apple Support: How to rent a movie from the iTunes Store on your computer
http://support.apple.com/kb/ht1390
Cheers,
- Brenden

How can I close the giant bookmark search screen that runs along the entire bottom of my browser/window?

View, toolbars, unclick Bookmark toolbar doesn't close it. It opens everytime I launch the Browser.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How to start Weblogic 10.3.5 managed server on port 80

Hello,
We're trying to understand how to start Weblogic as root so we can start on port 80 on Linux. We understand that we'll use the post bind UID to run as a non-priv user. Right now in the Admin console under the managed server, Server Start properties (node manager) we have the weblogic user as the user to start the server, which works. Is this where we'd put the root user? We tried that but it fails complaining about root user didn't have permission to start the server. Can someone shed some light?
Thanks

Hi
1. You are asking for 2 things here:
a) Start Weblogic as root user ?
Before I answer this question, who (Which User) installed Weblogic Software and who created Domain. I hope its NOT root user. Usually its not preferable to use root account for this. Instead create a new user account like for example oracle or some xyz. Then login with that account. Install Weblogic and create any Domain. I would NOT prefer/recommend using root account to install weblogic. This means, I would not recommend/support to start weblogic as root user. The thing is when you install weblogic, it stores/creates lots of files/scripts. Now when you start, it has to be same user. Because at the startup, we need to read files and also CREATE lots of temp files under domain root folder. So on unix, this becomes very complex. Simple answer is if you install weblogic and domain with user say "xyz" and try to start domain with "root", you corrupted your entire domain. Some files gets changed to root user and some files just FAIL saying you do not have permissions. So its just gone. If you are a Unix Geek, do some magic and restore all permissions back.
b) Start Weblogic at Port 80
Very Simple. Forget about above thing. Install Weblogic and create domain say with user "xyz". Just go to domain root folder, open config/config.xml file and edit the localport to 80. By default at time of domain creation if you used all the defaults like port 7001, then you will NOT see this entry in config.xml file. But still you can edit config.xml file manually. Stop the servers. Add a section with listen-port as 80. Just refer docs for the steps. After this change, your weblogic server is now running at port 80. NOW, the main precautions is make sure that you do NOT have any other stuff running at the same port 80. Otherwise, Weblogic server startup will fail saying port 80 is already is in use.
Now if you want both a) and b), still it is possible. But I would NOT want/recommend a), which is use "root" account to install weblogic server and create and start the Domain. Nope, totally not recommending and supporting this. Yes, port 80 can be used, but not the "root" account.
Thanks
Ravi Jegga

How to start SNMP on LDAP Dir. server ? Is that runs on port 161 ?

Similar Messages

Maybe you are looking for