How to start the netweaver portal to publish the reports

Hi gurus,
could any one body tell me how to start the netweaver portal, I am in the SAP management console screen.
I need to publish the SAP 3.5 query reports in to netweaver portal
PLease help me

Logon the portal as system admin
Create a SAP system, connect to the BW
then create a BW 3.x query iview in the Portal Content studio.

Similar Messages

How to link the reports to portal

Hai Friends...
I generated reports using discoverer plus and i viewed the reports using discoverer viewer . I am new to discoverer viewer.
Any body done please give me steps for how to deploy the reports in discoverer viewer and how to link the reports to portal.I wouid appreciate any help.
Cheers
Gopi

hi gopi,
u can store ur reports in the database using Discoverer user edition. these stored reports can then be viewed in the discoverer Viewer. here i am assuming that u have configured ur discoverer viewer correctly.
bye..
naresh

How to start the IR part in XI

Hi All,
How to Start the Design part in XI while Converting the PDF file into Text file using Module Processor?
Pls let me know.......
Regards,
Govindu.

Govind,
If you want some changes to be done to the file like mapping etc then you need to have the IR setting done too.
But if you are going to use XI as an FTP service you need no configuration on the IR except creating the Datatype , message type and message Interfaces .
Take a look at this blog,
<a href="/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp">XI in the role of FTP</a>
Regards,
Bhavesh

TS1538 How to starting the '' Apple mobile device '' on my iphone to connect on itunes?

How to starting the '' Apple mobile device '' on my iphone to connect on itunes?

Refer here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567

How to start the Oracle 8i client in redhat 7.2?

I have installed properly oracle 81 client and server properly.
I wanna access anothe linux server. But I don't know how to
start the clent ?..And what are should be done to access the
remote oracle server?
Thanks

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How to start the Message Server?

Hi,
I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
In order to start the message server, I run the following command:
D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
msg_server=>sapparam(1c): No Profile used.
msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 7972] Wed Jul 25 23:39:18 2007
[Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c 170]
[Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 87]
[Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1634]
I gave my best time to search for Profile configuration details. But I could not do that.
Can somebody tell me how to start the Message Server?
regards,
Anand

Hi Anand,
Will be good to know what OS are you using...
If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
If you logon as <sid>adm just type startsap
If for some reason you need to start only the message server try <prompt>: msg_server start pf=<profile of the system you want to start>
Regards
Juan
Please reward with points if helpful

How to start the server. Urgent.

I mistakenly deleted the icon from the Start menu, to start the SAP IDES server in my laptop. How to start the server from any other path.
I installed it in E drive (2003 server). Database path is F drive.

Hi,
Check the following path
E:\Program Files\SAP\FrontEnd\SapGui
Here the actual Logon Pad file would be stored with name "SAPLOGON" or "SAPLGPAD".
Create another shortcut for above file on your desktop.
Best regards,
Prashant

How to start the oc4j server

I install oracle 9ias 9.0.3,but i don't know how to start the oc4j server.
thanks for any help?

hi
Refer "Starting and Stopping OC4J" from
http://otn.oracle.com/tech/java/oc4j/doc_library/902/A95880_01/html/toc.htm
hope this helps.
shrini

How can start the free trial of adobe captivate 8

how can start the free trial of adobe captivate 8

Hello,
Welcome to Adobe Forums !
You may simply download using the link below
https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
If you need any help while doing this you may Contact Customer Care .
Thanks
Himanshu

How to start the datasocket in VC++ ?

How to start the data socket in VC++? In my application, i need to link to pc , so in order for me to start running the data socket, is it mean this two pc have to install with measurement studio software? after that, how can i code the server side so that the server pc can get the text file from client's pc?

Hi,
The DataSocket server is an executable, so you can just lunch it as any other executable. You can use the system commmand or any other way.
Once the server is running you can just use the connect method to start up the communication. You don't need measurement studio in the client machine, all you need is to create create an installer that includes the DataSocket component as any other MStudio controls.
Hope that helps.
Regards,
Juan Carlos
N.I.

How to stop the report from Web!

hi,all!
Now I can start a report from Web with schedule parameter!Can you tell me how to stop the report via the Web server?Or tell me with which patameter.Thank a lot.

hello,
there is a CGI/Servlet command called killjob which you pass the job-id of the job you want to kill.
regards,
the oracle reports team --pw

How to send the report output to the application server in a excel file

Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
Sundeep

Dear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points *

Starting the reports server as a servlet

Dear friends, I'm trying to run a JSP Report which was built with JDev and Report Builder, but when I compiled the JSP Report on JDev, the Internet Browser has started with the LOADING... page and nothing happened.
I have Report Services and HTTP Server started, but I can't verify if the Reports Servlet is running.
I've been reading the "Publishing Reports to the Web with Oracle9iAS Reports Services" document at "http://otn.oracle.com/docs/products/reports/htdocs/doc_library/getstart/docs/a92102_01.pdf" and it's written that we can start the reports server as a servlet typing :
http://< your_machine_name>:<your_port_num>/reports/rwservlet
In my case :
<your_machine_name> = bicas
<your_port_num> = Is it a HTTP port number? If it is. = 80
Then :
http://bicas:80/reports/rwservlet
But this return a HTTP 404 error, page not found.
I have Oracle9iDS and Oracle9iAS installed on the same machine.
What do I need to do to start the reports server as a servlet?
Do I need to do this to run a JSP Report from the Web?

Try the following:
1) Create a new project in JDev
2) Add a new Reports JSP object into the project from 'File -> new' (this'll setup the project form JSP report execution)
3) Edit the JSP report, or add your own jsp report to the project
4) run the JSP report
To use Reports servlet's in-process server, remove 'server=...' from JSP tag rw:report's 'parameters' attribute, and make sure JVM is set to 'hotspot' in 'Project Setting -> Runner'.
To use standalone Reports server, start the server, and specified the server in rw:report's 'parameters' attribute.
Hope this helps.
Regards,
Charlie Sheng

How to generate the reports in BI and display in EP ?

Hi All
   I am new to BI but i am working on EP
   Can any one help me how to generate the reports in BI and should be displayed
   in EP frontend? So what and all settings and installations i need to do ?
   Any documents on this will be really helpful to me..........
Adv...thanks and regards
Kops

Hi kops,
Check the links below.What you need is there..
How can i place a query developed in BEX to portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm

How to grow the report of customer's openitem with sales order

How to grow the report of customer's open item with sales order?
Now we can get the customer's open item with invoice No easily,but our end user need the the customer's open item also with sales order .And because a invoice to multi sales orders. I can do nothing.
Now I have a idea that a develivey No with one sales order , and one invoice with a sales order's develivery ,then one inovice to one sales order . I want to know if other company have use this idea. Or have other solution for my problem.

Hi Yuzhou Yang ,
Yes you are right. In FI transaction you can get the sales invoice wise , reference field of the header data.
As you are aware that while creating a sales order , no FI entry is generated.
In my opinion you can get the required report through customization.
Thanks
D.K.Lakshmi narayana

How to start the netweaver portal to publish the reports

Similar Messages

Maybe you are looking for