How to start the ServiceRegistery and AccessManager

I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) I used a Configure Now installation on my WindowsXP. Everything went fine and after installation I was able to go to
http://localhost:6480/soar/index.jsp
and
http://localhost:8080/amserver/UI/Login
when going to AccessManager Console what is the login username/password as I am unable to log-in
Then I restarted the box but after that I am not able to go to these pages it says page not found
I tried the following but gives errors. How do I start ServiceRegistery and AccessManager
C:\Sun\JavaES5\identity\bin>amserver stop
System error 1060 has occurred.
The specified service does not exist as an installed service.
C:\Sun\JavaES5\identity\bin>amserver start
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The service name is invalid.
More help is available by typing NET HELPMSG 2185.Any help is appreciated.
Thanks

KM will install with portal itself
after logging into portal goto -- content admin -- km content
and for collobration follow below steps to activate
Content Administration ® Portal Content ® Portal Users ® Standard Portal Users ® Default Framework Page
Double-click Default Framework Page.
Select the Tool Area iView checkbox.
Choose Open. The Property Editor page displays.
Choose Show All in the Property Category drop list menu.
Choose Enable Collaboration Lauch Pad properties.
Select Yes radio button.
Choose Save
Choose Close.
Choose F5 to refresh your portal screen.
now u can see collabaration link in tool area.
Regards
Krishna.

Similar Messages

Hello. Tell how to enter the program and to start working in it. I paid, loaded and installed the program Photoshop CC

help please to start working... with English at me in any way without translator... if somebody can explain in Russian as to start the program, I will be very grateful
Tell how to enter the program and to start working in it. I paid, loaded and installed the program Photoshop CC

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How to make the dblink and what is the use of this

plz any body tell me "how to make the dblink and what is the use of this"
sujit

Do you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed.

Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel

I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
 xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
 <af:document title="untitled1.jsf" id="d1">
 <af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
 <af:resource type="javascript" source="resources/js/home.js"/>
 <af:messages id="m1"/>
 <af:form id="f1">
 <af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
 <af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
 <af:noteWindow id="popupWindow">
 <af:panelFormLayout id="pfl2">
 <af:panelLabelAndMessage label="Task id" id="plam5">
 <af:outputText value="#{homeBean.taskId1}" id="ot64"/>
 </af:panelLabelAndMessage>
 <af:panelLabelAndMessage label="Start Location Name" id="plam6">
 <af:outputText value="#{homeBean.startLocation}" id="ot7"/>
 </af:panelLabelAndMessage>
 <af:panelLabelAndMessage label="Stop Location Name" id="plam7">
 <af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
 </af:panelLabelAndMessage>
 <af:panelLabelAndMessage label="tasktype" id="pla2m7">
 <af:outputText value="#{homeBean.taskType}" id="ot9"/>
 </af:panelLabelAndMessage>
 </af:panelFormLayout>
 </af:noteWindow>
 </af:popup>
 <af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
 <dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
 startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
 showMenuBar="false" showToolbar="false" iconPlacement="left"
 showTasksAsDailyBar="false">
 <f:facet name="major">
 <dvt:timeAxis scale="days" id="ta1"/>
 </f:facet>
 <f:facet name="minor">
 <dvt:timeAxis scale="hours" id="ta2"/>
 </f:facet>
 <f:facet name="nodeStamp">
 <af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
 headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
 <af:outputText value="#{row.PersonId}" id="ot1">
 <af:convertNumber groupingUsed="false"
 pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
 </af:outputText>
 </af:column>
 </f:facet>
 </dvt:schedulingGantt>
 </af:form>
 </af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
 $("div[et]").live('mouseover', function (e) {
 $('#cb1').css("position", 'absolute');
 $('#cb1').css("top", e.pageY-4);
 $('#cb1').css("left", e.pageX);
 var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
 var element = AdfPage.PAGE.findComponent("f1");
 var taskIdToPass = null;
 if ($(this).attr("tid") !=undefined) {
 taskIdToPass = $(this).attr('tid').toString();
 } else {
 taskIdToPass = $(this).parent().attr('tid').toString();
 var param = { taskId : taskIdToPass };
 AdfCustomEvent.queue(element, "jsServerListener", param, true);
 if (!popup.isPopupVisible()) {
 var hints = {};
 hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
 hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
 hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
 popup.show(hints);
 }).live("mouseout", function () {
 var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
 popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
 private RichPopup popup;
 private String taskId1;
 private String startLocation;
 private String stopLocation;
 private long taskId;
 private String taskType;
 public HomeBean() {
 super();
 public void serverEventHandler(ClientEvent clientEvent) {
 String taskIdString = clientEvent.getParameters().get("taskId").toString();
 this.taskId = Long.parseLong(taskIdString);
 DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
 ApplicationModule am = dc1.getApplicationModule();
 ViewObject vo = am.findViewObject("PdTrfDayView1");
 RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
 Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
 Row row = rows[0];
 this.taskId1 = row.getAttribute("PdTrfDayId").toString();
 this.startLocation = row.getAttribute("StartLocation").toString();
 this.stopLocation = row.getAttribute("StopLocation").toString();
 this.taskType = row.getAttribute ("PdTrfTypeId").toString();
 RichPopup.PopupHints ph = new RichPopup.PopupHints();
 vo.closeRowSetIterator();
 public long getTaskId() {
 return taskId;
 public void setPopup(RichPopup popup) {
 this.popup = popup;
 public RichPopup getPopup() {
 return popup;
 public String getTaskId1() {
 return taskId1;
 public String getStartLocation() {
 return startLocation;
 public String getStopLocation() {
 return stopLocation;
 public String getTaskType() {
 return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AM

Hi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}"

How to change the look and feel for Heading of quick launch menu in project server 2010

Hi
can someone tell me how to change the look and feel of Header names in quick launch.
I want the header to be displayed in Bold with Underline to it.
could this be possible for just header in quick launch in project server 2010.

Hi Rohan
It does not work this way. You have to use a content editor webpart.
See references below that might help you starting with this customisation:
Http://go4answers.webhost4life.com/Example/sharepoint-2010-quick-launch-look-feel-78379.aspx
Http://m.sharepointpromag.com/sharepoint/four-ways-add-or-remove-quick-launch-menu-control
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to start the IR part in XI

Hi All,
How to Start the Design part in XI while Converting the PDF file into Text file using Module Processor?
Pls let me know.......
Regards,
Govindu.

Govind,
If you want some changes to be done to the file like mapping etc then you need to have the IR setting done too.
But if you are going to use XI as an FTP service you need no configuration on the IR except creating the Datatype , message type and message Interfaces .
Take a look at this blog,
<a href="/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp">XI in the role of FTP</a>
Regards,
Bhavesh

How to start the Oracle 8i client in redhat 7.2?

I have installed properly oracle 81 client and server properly.
I wanna access anothe linux server. But I don't know how to
start the clent ?..And what are should be done to access the
remote oracle server?
Thanks

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How to start the Message Server?

Hi,
I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
In order to start the message server, I run the following command:
D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
msg_server=>sapparam(1c): No Profile used.
msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 7972] Wed Jul 25 23:39:18 2007
[Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c 170]
[Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 87]
[Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1634]
I gave my best time to search for Profile configuration details. But I could not do that.
Can somebody tell me how to start the Message Server?
regards,
Anand

Hi Anand,
Will be good to know what OS are you using...
If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
If you logon as <sid>adm just type startsap
If for some reason you need to start only the message server try <prompt>: msg_server start pf=<profile of the system you want to start>
Regards
Juan
Please reward with points if helpful

How to start the oc4j server

I install oracle 9ias 9.0.3,but i don't know how to start the oc4j server.
thanks for any help?

hi
Refer "Starting and Stopping OC4J" from
http://otn.oracle.com/tech/java/oc4j/doc_library/902/A95880_01/html/toc.htm
hope this helps.
shrini

Start the Oracle and EM DBConsole service in Linux

Hi
How to start the ORACLE service (ORCL) and the EM DBConsole service in Linux (Suse 10) environment
i hv checked in the Bin - /opt/oracle/product/10.2/db_1/bin
but unable to figure out which service....
need help!

hi again
yh DB has been successfully opend.
select status from v$instance; ----> open
but still cannot get the EM DB console
http://machine-name:1158/em/
any idea...
this is the err...
lxuser@linux-tkuk:/opt/oracle/product/10.2/db_1/bin> *./emctl start dbconsole*
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://linux-tkuk.site:1158/em/console/aboutApplication
Timezone mismatch: The agentTZRegion value (GMT) in
/opt/oracle/product/10.2/db_1/linux-tkuk.site_orcl/sysman/config/emd.propertiesdoes not match the current environment TZ setting().
The dbconsole cannot run with this mismatch.
If GMT is the correct timezone, set your timezone environment variable to GMT and repeat the 'emctl start dbconsole' operation.
If GMT is not the correct timezone, make sure that the timezone in your environment is correct, and then run the following command in your local Oracle Home: 'emctl resetTZ agent'
The output of this command will include detailed instructions to follow, to correct the mismatch.
here it says to change the time zone...how to do that.....!

How to start GSd service and ASM (ADVM Driver Not found)

Dear fellow
Can any tell me how to start the GSD service and install ASM ADVM Driver.
I can try with srvctl utility.

Dear zekeriya
I also check it but the gsd service is not running I try to start it with srvctl utility but did not start.
fedb16# ./srvctl status nodeapps -n fedb16
-n <node_name> option has been deprecated.
VIP fedb16-vip is enabled
VIP fedb16-vip is running on node: fedb16
Network is enabled
Network is running on node: fedb16
GSD is enabled
GSD is not running on node: fedb16
ONS is enabled
ONS daemon is running on node: fedb16
eONS is enabled
eONS daemon is running on node: fedb16
fedb16#

When I try to buy any app or song from iTunes app or app store on iPhone 5 it seems to start the stops and goes back to baseline in a second or two

When I try to buy any app or song from iTunes app or app store on iPhone 5 it seems to start the stops and goes back to baseline in a second or two.
It did it with my old iPhone 4 in last month or so, and it I hoped it would go once I updated to new iPhone 5. The problem has transferred to new phone too.
I can't sign in to iTunes account on iPhone. It takes the password then resets to baseline. No error message comes up. On the base computer (pc) it will allow me to sign up and buy songs, apps etc. I can then sync the phone and put them on it. It just won't let me buy direct from the .
As there are no error messages I am at a loss what to do. I have updated the payment details on my account, and my husband has an iPhone 4 and has no such problems. We share the same wifi. I have tried with 3G as well as wifi, with no luck.
I am pretty much out of ideas, and have tried searching forums but there is so much overlap between queries that I can't find a similar problem from someone else, but I am sure it exists!
Can anyone please help me?
Thanks in advance
Sarah

I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps

How to change the name and description of a wim using DISM

With Imagex we could update the name and description of the wim with on easy command:
imagex /info img_file [img_number or
img_name] [new_name] [new_desc]
e.g.
imagex /info Win7Combined.WIM 1 "Win7(x86)" "Windows 7 x86"
Since the ImageX tool is deprecated in Windows 8 and has been replaced with DISM, can someone explain how to update the name and description with one easy command using DISM like we could with Imagex?

It looks like this person had the same issue. Have you seen this
link
It talks about exporting an Index into a new WIM. Which, in a way, would be renaming it. It's really recreating it and you have to give it a name. But it seems to work.
Dustin Estes - MCP | www.dustinestes.com

How to start the ServiceRegistery and AccessManager

Similar Messages

Maybe you are looking for