How to start Top-Level Navigation on Level two?

Hi,
does anyone known a trick how i can start the top-level navigation at Level two?
I make an own frameworkpage and try to set it in the iview properties, but there is not an property for this. it is only for the detailed-navigation iView there.
For what:
I need this, because i would open an pop-up with an other portal window. I link to the popup with navigation-target=... In this pop-up should only be the content of one role. This folder i have set to "invisible in the navigation area". So the User always see him in a popup. when i start at the default Top-navigation level 1, the user see all the other navigation folders.
Best regards,
Patrick

Hi Patrick,
up to SPS13, this needs some hands on on different parts of the TLN. What I've done this spring was showing all top-level nav targets within a select box in the masthead and then, after having selected one of these entries, the TLN shows just the content of this top level entry. So this is more or less the same. As said, some work to do.
As of SPS14, with the new navigation taglib, I expect this to be much less work; anyhow, I didn't convert the results into SPS14, so I cannot say if this is really as easy as I expect.
Hope it helps
Detlev

Similar Messages

How to find top utilized query for last two months in oem

how to find top utilized query for last two months in oracle enterprise manager?

Can you mark the thread as Helpful and once marked the information can be reviewed by other customer for similar queries
Regards
Krishnan

How to start free offline navigation for iphone four s in newzealand

i want to start usong gps of my apple i phone four s but no offline maps instald how can i get started with offline gps free?
like in nokia x6 we get free maps ofline really gud ph

Everything that is available to you in this regard - free or otherwise, is available via the iTunes app store for your country.

Make top-level navigation smaller in size

Hi all,
the default top-level navigation in the AJAX framework uses quite a big piece of the browser window (almost 70 px). This space could be used better especially when integrating reports.
So my question is how to reduce the height of the top level navigation (first level only) from around 70px to maybe 40-50? Can this be done in the portal theme editor? Unfortunately there is no preview available yet when editing AJAX specific settings. Or do we need to change the coding of the framwork page?
I think it would be pretty messy to change all the pictures and fonts that are used in the top-level navigation.
Thanks for any suggestions or even the "it's not possible" answer.
Regards,
Fabian

Hi Fabian.
But shouldn't it already be possible to change this?
At least you can built your own theme on a base of default one and then directly modify css and image files. However, I do not recommend this solution as far as AFP still in active development.
Will the mechanism to change the theme be enhanced in EhP2 an do we know when EhP2 will be available?
Yes, full support for customization is planned in Ehp2. According to an addendum to SAP's Release Strategy for Large Enterprises, status July 2009, which you can find at [Service Marketplace|http://service.sap.com/releasestrategy], EHP2 for NetWeaver 7.0 is rescheduled to June 2010.
Best regards,
Aliaksandr Zhukau
P.S.: Why not just use the "Full Screen" button? It hides TLN.

Worksets not visible in the top level navigation

Hi all,
I installed ESS business package and.ESS 600 sp08.Everything is fine but the worksets of the ESS role are not coming in the top level navigation (2nd level).They are visible in the detailed navigation.
I checked the option in the worksets .
the property invisible in navaigation area .It is set to No.So no issues.
Still it is not visible
Any clues please.
Thanx and Regards,
rajesh

Hi,
As Rightly said
1) First copy ESS folder created in "Content provided by SAP" under "Portal Content".
2) Copy standard ESS Role for u r customization
3) Open Custom Role "Employee Self Service"
4) Property Category : Navigation
5) Check Entry Point property
It shuld be NO for Role but It shuld be YES for Workset ESS under it as per standard then Its Fine
6) Then Assign this role to u r User thru UserAdmin
7) Refresh
It shuld work !!!!
Reward Points !!! If helpful
Edited by: PK on Mar 25, 2008 11:59 AM

How to Display Detailed navigation passing Top level navigation node name

Hi All,
I have prepared a DLN par file but unfortunatly my requirement is such that I need to pass one of the toplevel node name as input parameter and that should display the corresponding DLN which is from 3rd level.
I have checked in sdn for passing a value to the navigation tag lib which will consider it as a selectednode but could find none.
Can some body suggest me how to acheive this.
Thanks in Advance.
Sai Krishna. K

Hi Kiran,
Thanks for your Reply..
Following is my Scenario:
I use 2 same versions of portals connected via federated portal concept.
I have my detailed navigation par file in portal2 and was calling it from portal1 from a iview.
Since I am not physically navigating in portal2(which mean there is no selected node to iterate ), when I call that iview in portal1 it is picking up only 1st node in top level navigation.
So i need to pass "My reports" (as 1st level) & "India" (as 2nd level) as parameters such that it gets only its DTN at all times from 3rd level.
Hope you understand my scenario, below is my iteration code logic.
<div id="myslidemenu" class="jqueryslidemenu">
<ul>
     <nav:iterateSelectedNavNodesLevel level="<%=START_LEVEL%>">
     <%-- the 'currentDepth' attribute provides the byte value of the current level --%>
    <nav:recurseNavNodeChildren currentDepth="depth">
         <% current = start + depth.intValue() - 1; %>
         <%=writeClosingTags(last - current)%>
         <%
        last = current;
        %>
        <%-- we want to distinguish between folder and leaf nodes so we can use different graphics --%>
          <%-- complete the html syntax for the 'class' attribute pass it as an anchor attribute--%>
          <li><nav:navNodeAnchor navigationMethod="byURL" />
          <%-- checks for additional navigation level and the appropriate html tags to accomodate them --%>
        <nav:ifNextRecursionDepthWillIncrease>
            <ul>
        </nav:ifNextRecursionDepthWillIncrease>
        <nav:ifNextRecursionDepthWillNotChange>
            </li>
        </nav:ifNextRecursionDepthWillNotChange>
    </nav:recurseNavNodeChildren>
    <%=writeClosingTags(last - start)%>
    <% last = start; %>
</nav:iterateSelectedNavNodesLevel>
</ul>
</div>
As per the passing parameter concept please explain me a bit more clear with step by step procedure.
<b>Here if not passing parameters, providing static values will also do for my requirement.</b>
Many Thanks,
Sai Krishna.
Edited by: Konchada Sai Krishna on Feb 14, 2009 9:42 PM

How to make top level navigation not refresh

Hello Guys,
I have a question concerning on my External Facing Portal, my boss wants that when I click on a tab or a link in the Top Level Navigation , to load the content in the Content Area without refreshing the whole page, What I want is that when I click on a tab or link of the Top Level Navigation , the Top Level Navigation and the MasterHead not to refresh and that the content be loaded and refreshed only in the Content Area. The only way I know to do this is by making a frameset of my page and to make the masterhead and toplevel navigation a frame and the detalied navigation a frame and the content area a frame, and in the links to put the target property to the name of the content area frame, but I don't know if this is possible to do in the portal, I see that all is embedded and I don't know how to make a frameset like this in the portal.
Any highlights to solve this will sure be appreciated.
Thanks
Rewarding points will be given.
Luis

Hi,
When you are implementing External Facing Portal, i think you have used Light Framework Page. In Light Framework Page, only one Framework has been used, so when you click on the top level navigation, the whole page will get refresh, so there is no otherway as of my knowledge. If you use standard framework page in portal, it is possible to do (i.e. the content area only get refresh) and the concept of your External Facing Portal is eliminated here.
Regards,
Venkatesh. K
/* Points are Welcome */

How to enable "top level navigation " in portal

Hi all,
I am unable to see the "top level Navigation" once I logged on to portal
Previously I was able to see that
I performed the following steps thats the reason why I am unable to see "top level navigation"
1 Logged on to portal
2 Content administration
3 Expanded Poratl Content
4 Expanded Content Provided by SAP
5 Expanded End User Content
6 Expanded Standard Poratl Users
7 Selected "Default Frame work Page"
8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
Thanks in advance

undo the changes what you have done.
after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
Thanks
GLM

How to display image in top level navigation

Hi,
how can i display an image in the top level navigation?
(looks like the top level navigation of the SDN)
Thanks,
Norman

Hello Norman,
Please read through these forum links which also deal with customization of Portal 'Top Level Navigation'.
Basically you need to download the required masthead.par and make the necessary changes as mentioned in the forum messages as belwo:
[Customizing Top Level Navigation|https://forums.sdn.sap.com/thread.jspa?threadID=511530]
[Customize Portal TLN|https://forums.sdn.sap.com/thread.jspa?threadID=1145007]
Hope this helps.
Regards,
Shailesh

How to hide name of Role from the top level navigation of the portal

Hi Experts,
In my project, I have created 2 roles Role A and Role B. These roles have been assigned to User X.
When user X logs in, he is able to see name of role that is 'A' in the top level navigation.
As per the requirement, user X should not see the 'A'.
Rather user X should see following:
Top Level Navigation: 'My Work'
When user clicks on 'My Work', he should see
'My Sub Work1' and 'My Sub Work2'.
After that under 'My Sub Work1' user should see following
All Objects of Role A
All Objects of Role B
Name of role i.e. 'A' or 'B' should not be displayed at all at any place in navigation.
Only whatever objects has been assigned to Role A and B should be displayed in detailed navigation area.
Can you please let me know how to achieve this?
Pictorial Diagram:
                  My Work       (In top level navigation)
My Sub Work1    My Sub Work2    (In top level navigation)
_________Objects of role
A
       |
       |_________Objects of role
                               B
Please note that 'My Work' and 'My Sub Work1' and 'My Sub Work2) are not roles. They are just the name of folders.
Can you please let me know how to achieve it?
Regards,
Brian

Hi Brian,
Try the following steps.
1. Change the 'Entry Point' property of Roles A and B to 'No'.
2. Create a role folder called 'My Work' under A and B.
3. Set the 'Entry point' property of this folder to 'Yes'.
4. Set the 'merge id' property of the folder as "mywork" (or any other string) under both roles A and B.
5. Under 'My Work' in Role A,
a. Set the 'Merge Priority' property to 50.
b. create subfolder 'My sub work1' and create all your objects.
6. Under 'My Work' in Role B,
a. Set the 'Merge Priority' property to 100.
b. create subfolder 'My sub work2' and create all your objects.
7. Make sure the user is assigned both the roles A and B. Only then he/she can see objects of both the roles.
8. One thing to remember while merging folders is that, all the entities that are being merged should be at the same level. For eg: in our case, you cannot merge 'my subwork1' in role A, with 'my work' in role B.
Reward points if helpful.
Regards,
Priya

How to remove the worksets from the Top level navigation for the ESS role.

Hi All,
I am working on enabling and disabling certain services in the ESS worksets.
we are using EP 7.0, ECC 6.0 (NW2004s).
When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
Thanks for your help
Regards
SM

Hi,
Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property.

Help: How to make the top level navigation into vertical at the left panel

We have a need to change the top-level and 2nd-level navigation bars (horizontal)
into the nodes on the left navigation panel (vertical).
We find some way but it is a very extensive job.
Is there any way to do it quickly?
Thanks a lot! Points guaranteed.

Hi,
Try to develop your own menu by using Navigation Tag Libraries. Check this link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/42/f35146a7203255e10000000a1553f7/frameset.htm">Navigation Tag Library</a>
There is also sample codes. You can start your project from this codes.
Regards
Abdul.

How to hide Top Level Navigation?

Hi,
I created a quicklink for an iview.
I am able to call the iview from IE window using the quicklink.
But it displays the top level navigation (Company Logo, Welcome message, Logoff, Role tabs,...).
How do I hide this?
Thanks
Sundar

Hi Vinit,
Your solution is working when I clicked the preview button in iview edit window.
But when I try to open the iview using Quicklink with external IE window, it shows the MastHead, TLN.
It is not hiding the MastHead and TLN.
Thanks
Sundar

How to change Top-Level navigation design bar into an image?

Hi guru's,
is there anybody who knows how i can change the Top-Level navigation design bar into an image?
thanks in advance
greets
Kurt

Hi
Check this....
http://help.sap.com/bp_epv260/EP_JA/documentation/EP/N08_BB_ConfigGuide_EN_JP.doc
Regards

How To: Link to Top-Level Navigation

Hi Experts -
Can someone please tell me where to start / what to look for in relation to creating links to the top-level and second-level navigation areas in the Portal.
I.e. I want to create an html document that links directly to one of the top- or second-level navigation objects. What search terms should I use to locate this information, and where should I start looking?
Thanks in Advance.
Tammi

Hi,
You can create links to any navigation node, the keyword here is NavigationTarget.
Check this for more:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/014421d21d6fade10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/b3/7b8163404448e7aad7899c0b30313e/frameset.htm
Regards,
Praveen Gudapati

How to start Top-Level Navigation on Level two?

Similar Messages

Maybe you are looking for