How to start up ID on my Mac

I downloaded the trial ID on my Mac OS X 10.7 and I don't know how to start using it.

First step is to install it. There are help files within the product. You can also look at these links:
http://helpx.adobe.com/indesign.html

Similar Messages

How to start a Java application on Mac OS

Hello,
I am not sure whether this post would be appropriate to this community, but with the hope to find the answer to the question we have I'll try:
We are fairly new to Java Technology. We had the task to develop an application for Windows OS, and have successfully completed the job. BUT, we decided to go a bit further and see how our program would behave on Mac OS.
Unfortunately, we have never dealt with Macs before, thus don't have any idea on how to make the application run on Mac OS platform.
With Windows we have no problem, went by the most simple way by creating a .cmd file with "java name_of_file" string. Is there any similar simple way to start our small program on Mac OS?

There are many options:
From Terminal (similar to ms-dos prompt, if you didn't know it already):
If you have "java MyApp" in your myapp.cmd, you can execute it with:
sh myapp.cmd
Another option is to set myapp.cmd as executable:
chmod u+x myapp.cmd
and then from Terminal: ./myapp.cmd
Third and best option is to make an executable jar. Then you only have to double-click .jar -file to launch your application (and no need to go to Terminal).

How to start a RAID 5 rebuild (Mac Pro Lion)?

Dear community,
does anyone know a solution for the following problem?
Mac Pro (2011) with hardware raid and four drives (2TB) configured as raid 5 raidset (named RS1). Raid controller lost connection to the drive in bay 3 but could reconnect after a couple of minutes. Raidset RS1 then reported as degraded in Raid Utility and drive in bay 3 as "roaming". It was no longer part of the raidset. Turned Mac Pro off, removed and re-inserted drive. After the next start the drive in bay 3 shows in Raid Utility with all green status (no longer roaming). Making the drive a spare drive via Raid Utility disconnects it for ten to twenty seconds, then it shows up again. No rebuild of raidset starting. According to past discussions I found here, the rebuild should start automatically. But what can you do if it does not?
Raidutil output as follows:
raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB No tasks running
raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #3 <none>          2.00TB   IsReliable IsNotAssigned
Bay #4 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Kind regards,
Marc

Thanks for your reply. Do you have any idea how to re-initialize the drive? It now seems to be marked as spare(?) and any operations on it are rejected:
> sudo raidutil modify drive --removelocalspare -d 3 -r RS1
Modifying drives...   FAILED.
The drive is in use and is unable to be set unconfigured.
> sudo raidutil modify drive --removeglobalspare -d 3
Modifying drives...   FAILED.
The drive is in use and is unable to be set unconfigured.
> raidutil list status
Apple raidutil version: 1.3.0
General Status: Issues Found
        The volume [R4V1:RS1 [ID: 4]] is degraded.
        The volume [Vol-RS1:RS1 [ID: 4]] is degraded.
        Raidset (RS1) is degraded.
Battery Status: Charged
Controller #1: Hardware Version 2.00/Firmware E-1.3.2.0
                Write Cache enabled
Volume            Status            Type       Drives       Size Comments
R4V1              Is Viable         RAID 5     1,2,4      3.23TB Is Degraded
Vol-RS1           Is Viable         RAID 5     1,2,4      2.00TB Is Degraded
> raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #3 <none>          2.00TB   IsReliable IsNotAssigned
Bay #4 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable

How to start video chat with another mac

i tried to start a video chat with my daughter living in another province. what do we have to do to start the video chat?

Each of you needs and Apple ID and password so you can sign in to Face Time. Then one of you "calls" the other using the Apple ID or e-mail address of the person whom you are calling. The party being called will hear their Face Time start ringing with a new window that has an Accept and Reject button at the bottom of the window. Click on Accept to start up the call. It may take a few second for the two to sync up with each other.
FaceTime for Mac- About HD video calling

How to start and stop Network on MAC OS 10.4

Hi,
for starting my oracle database I need to disconnect my PowerBook from the network to start up in order to allow the Enterprise Manager to come up with changing DHCP address (Loopback). I am looking for a command similar to '/etc/init.d/network start stop restart' on Linux.
Does any body know?
Kind regards........Lorenz

service generally manages the lower level services on the system.
High level services such as Apache are managed via serveradmin:
serveradmin status web
serveradmin start web

How to sync N70 and iSync on Mac OS X

I have successfully done this on my system and it works like magic. You just need to add a line of code to one of the iSync files, and create an N70 icon.
See my blog for full details:
http://goldgirluk.typepad.com

Answered: http://stackoverflow.com/questions/13708874/how-to-start-flash-from-java-on-mac-os-x
String[] commands = new String[]{"open", "-a", "Adobe Flash CS5", jsflFile.getAbsolutePath()};
ProcessBuilder pb = new ProcessBuilder(commands);
pb.start();

How to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer

how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
any suggestions?

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

I want to bring my iTunes and content from a Windows PC to my new MAC mini and dont know how to start

I did find the migration assistant on the MAC but no counterpart on my PC.
Therefore I don´t know how to start.
I found the
www.apple.com/migrate-to-mac
page.
I think this will help with the migration assistant for Windows

Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

How can I change the proggrams my Mac opens when I start my laptop?

How can I change the proggrams my Mac opens when I start my laptop? My mac book Air opens Word and Skype automatically and I can´t seem to make not to do this. Help!

Your Mac will also open anything that was open when it was shut down unless you uncheck this option in the restart and shutdown dialog.

How to start in TDM or transfer data from an older Mac without FireWire??

For the MacBooks that don't have FireWire, how do you transfer data from another Mac since you can't start in Target Disk Mode?
Similarly, with a FireWire Mac, if I need to do some disk repair, I can start in TDM and run Disk Utility's Repair Disk or rebuild the directory with Disk Warrior. What do you do with these non-FireWire Macs?
(What is Apple thinking by removing FireWire???)
Chris

For the MacBooks that don't have FireWire, how do you transfer data from another Mac since you can't start in Target Disk Mode?
I would still use Firewire.
The hard drive is fairly easy to remove on the Macbook. I would remove it and install it in an external Firewire enclosure temporarily to transfer your files quickly and reliably, then put the drive back in the Macbook.
You 'can' use USB or Ethernet, but it's not as reliable as Firewire.
Firewire is "isochronous", basically meaning that you can pump "clocked" data though it in real time. USB works more like TCPIP, with the data chopped up into packets and later reassembled. (Thus, at a minimum, you have latency, that is, the wait for the data to be "put back together".) Second, the Firewire protocol allows more direct address to memory (including mass storage) with minimal intervention of the CPU.
Putting the drive in a external Firewire enclosure is a bit more work, but nothing will interfere with it. No collisions, no glitches. Firewire is rock-solid.

How to start RSH on MAC mountain lion? I'm getting connection refused error

How to start rshd on mountaion lion??
>mac-29#rsh CMD 'rsh' '10.73.105.131' '-l' 'root' '/bin/mkdir /mnt; echo END'_'COMMAND'_'OUTPUT'
<<mac-29#rsh|10.73.105.131: Connection refused\r\n

Wow, no answer yet? It's been 6 months.

When i start my computer it finds mac donald hot spot not my how do i get rid of mac don

when i start my computer it finds mac donalds wyfy next to me i need to go to setings to change to my wyfy how do i get rid of mac donald

System Preferences/Network/Advanced Button.... Highlight mac donald and hit the minus sign.
You can also re-order the list in the order of most important to least important by clicling and dragging up and down.
Hope this helps, GDF

FaceTime and iChat?..how to start chat from my iPad to a Mac on iChat?

how to start chat from my iPad to a Mac on iChat?

Yes, that is exactly what I mean.
The iPad can only do FaceTime and FaceTime is NOT linked (compatible) with iChat.
If your parents have an older Mac, or are only on Leopard, Tiger or such, you could use Skype.
It's free. The video quality isn't quite as good, but it does work. Your parents would need the Skype program installed on their Mac. You can download the free Skype for iPad.

How to start up from 2nd mac? Need to un-trash deleted files...

I accidentally put in trash and emptied a folder with weeks of work and I have to do EVERYTHING POSSIBLE get it back. The Mac shops here in L.A. are all minimum 5-7 days repair turnaround - that means I can't work for five days and they may not be able salvage anything anyway.
Immediately upon realizing what I did, I stopped writing anything to the harddrive - so basically I can't use my computer.
I've found Norton UnErase is useless unless you had FileSaver previously installed and running regular backups.
I don't know anyone local with a Mac but I could take my G3 to work, try to start it with my G5 there and run a shareware app called DataRecoveryTool 2.0.3. So far installing DRT on one of my 3 partitions hasn't worked - it doesn't recognize or list any volumes to recover..
Trouble is, I don't know how to start one Mac from another. I just need an ethernet cable and some keyboard commands, right? I've seen it done long ago.. My cousin in Pasadena has a Powerbook - can I do it with that? What do I need to bring with me?
Would appreciate all help that would lead me towards re-gaining my data. If you're in LA (SFValley) and have experience - I will pay you to help me! TIA
BW G3 400 Mac OS 9.2.x

Hi, 150mph -
Firewire Target Disk Mode could achieve what you want - except that the B&W G3 models can not be the Target machine in such a setup, although they can be the Host machine.
Data Recovery may work only on a disk basis, not a volume basis. Here's a couple of other utilities to try, ones designed to recover data from a mechanically sound drive which refuses to mount.
Data Rescue
Virtual Lab
You may need to pull the drive from the B&W G3 and place it in a multi-drive capable Mac, then use a data recovery utility on the B&W's drive while that other Mac is booted to its normal drive.

HT1338 how can make a room from my start up disk in in mac pro

how can make a room from my start up disk in in mac pro

Only you can decide what you want to delete to free up space on your PB, Personally I think you'll find 17 GB won't go very far when you start to add video.
Consider an external drive. Don't forget if you let your free space fall below 10% of the total size of the drive you will risk corrupting your directory structure or causing other damage which may result in a loss of data.

How to start up ID on my Mac

Similar Messages

Maybe you are looking for