How to start webstarterapp Node

Hi friends,
My webstarterapp Node is not getting started.Even if I restart the system again and again it is showing down status.Can any of my forum friends tell me how can I restart the node.
Regards
Prasenjit

check: http://e-docs.bea.com/wls/docs61///////adminguide/remotestart.html
Chris wrote:
Does anyone know as title...
i hava two machines, hostA and hostB, A is administration server and B is the
managed server. now, how to configure the node manager.
please describe detail.. or i lose any important info. Thx.
ps, please don't use the mail to me.

Similar Messages

How to start / stop nodes without domain-controller / automatically on Win?

Hi,
we have a distributed installation of CMSDK 9.0.4.
We have installed a 9.2.0.4 Database on Solaris and we are using the 10g(9.0.4) Infrastructure on Solaris with it.
The first installation of CMSDK uses a J2EE-MidTier installation on the Solaris server and contains the CMSDK domain controller and a normal node with nfs protocol server running.
The other installations are done on Win2003 Blades. Currently we are using two Blades. On each there is a J2EE-MidTier installation and within these we have installed CMSDK with HTTP-Node and normal node. We are using NTFS-Server within the normal nodes.
The Blades are within one Domain and we have NLB-Cluster activated for both.
The whole thing sounds complex, but it works fine. We only have some trouble regarding start/stop of the nodes:
1. If the solaris backend fails, our cluster-configuration tries to stop and start cmsdk. While stopping cmsdk, all nodes - even those on the Win-Servers - are stopped. But starting does not bring em up again automatically.
2. If a Windows Server is booted, the normal node does not start automatically.
3. If one Windows Server is not available, the ifsctl check takes a very long time because it's trying to get information from the missing one.
Is there a way to restart the domain controller and node on solaris without stopping the nodes on Windows?
How can we start the windows nodes automatically after reboot?
Is there a way to probably start the nodes without being managed / guarded by the domain controller?
Thanks for help,
Alex

Try adding this script to your /etc/init.d directory:
#!/bin/sh
ifsctl start << EOF
<ifsctl password>
EOF
Replace <ifsctl password> with the password that you would give at the prompt.
It will complain about Inappropriate ioctl for device, but it works.

How to start Single Node of Exadata 1/2 Rack

Recently while working on 1/2 Rack of Exadata, one of the node went down. My other nodes are working fine.
Heavy ETL processes are running i don't want to stop them in between, but i want to start up the node which is down.
How can i do so? How can i startup single node of Exadata without bringing down other nodes?

logically ( via ilom ) or physically press the power button. If the node is fine it will come up and join the cluster... and it will start serving requests. Its that simple...
Since crs is enabled it would automatically bring up all required resources during the boot process.
Edited by: robinsc on Jul 18, 2012 2:15 PM

Starting a node while you are in other node in RAC

Hi,
Any idea how to start a node while you are in other node in RAC?

Hi,
Not sure what is your database version. However, you can start/stop the instance via srvctl and/or sql*plus.
Note: 753516.1 - The difference between using srvctl vs using sqlplus for start/stop one or more database nodes
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide
http://www.oracle.com/technology/documentation/database.html
Regards,
Hussein

How to start CRS and other services after rebooting nodes.

Hi,
i have created two node cluster database.how to start CRS and other service after rebooting nodes?
Thanks,

use crsctl command start...
$ORA_CRS_HOME/bin/crsctl start crsOr check status about CLusterware...
$ORA_CRS_HOME/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthyIf not OK... check log at $ORA_CRS_HOME/log/hostname/*
and check status database , service and etc...
use crs_stat
$ORA_CRS_HOME/bin/crs_stat -t
$ORA_CRS_HOME/bin/crs_stat if you find some service or instance ... not online...
use srvctl command, help to start
Get Help...
$ORA_CRS_HOME/bin/srvctl -h

If I log in my Account on my mac, nodes is always starting. Nodes is not in start objects... Has anybody an idea how to fix this issue?

If I log in my Account on my mac, nodes is always starting. Nodes is not in start objects... Has anybody an idea how to fix this issue?

See this discussion.
Apps open after boot
If that doesn't work, try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

How to start/ restart the service in visual admin of SAP WAS 6.4?

I have installed the sneak preview version of SAP NetWeaver WAS 6.4 for default Database MaxDB. While developing a simple application to manage simple database table citymaster with 2 columns in jsp I am getting error as
Exception e com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at : java.comp.
Looking at visual admin tool for WAS 6.4 all the entries are in color blue but the last entry for 'DATASOURCE' is in RED color where 'java.comp/env/JDBC/DATASOURCE' is the jndi reference created for default DataSource.
Can any one help me that why the last entry is in RED and it that say that some error has occured or that entry is not started then how to start that?
Please help....

Dear Daniel,
I have checked the Visual Administrator's JNDI Registry service entry in the ejbContexts node but there is no entry for the project which I have created.
It get deployed while I right click on the project's ear file and click on "Deploy on J2EE Engine". But same as before while checking in Browserthe site gives the same error...
503   Service Unavailable
Application cannot be started!
Details: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application bcone.com/EntityCMPAppln cannot be started, because it has hard reference to resource CONFIG_DB with type javax.sql.DataSource, but it is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processUsageOfComponent(ReferenceResolver.java:508)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:337)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:149)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginLocal(StartTransaction.java:285)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:355)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:120)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:224)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4170)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2390)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2267)
     at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:101)
     at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:80)
     at com.sap.engine.core.thread.impl4.SingleThread.execute(SingleThread.java:70)
     at com.sap.engine.core.thread.impl4.SingleThread.run(SingleThread.java:111)
Please help me, how to recover this error.
Rgds,
Vivek

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

How to create a node-typed XmlValue from a String with Java?

Hi all,
It's already been a while since I'm trying to get how to construct a node-typed XmlValue from a String value but I keep getting different exceptions no matter what method I try.
I started with the first way that came to my mind:
XmlValue value = new XmlValue("<element/>"); //Even though the String represents a valid xml node, calling value.isString() returns true.
then I thought ok, so I should maybe use the typed constructor:
XmlValue value = new XmlValue(XmlValue.NODE, "<element/>"); //_It does not work either, calling value.isNull() returns true.
I also tried with the rest of types (XmlValue.DOCUMENT, XmlValue.DOCUMENT_NODE, XmlValue.ELEMENT_NODE.....) and it did not work either with any of these.
Fiinally I saw that you can construct a new XmlValue from a XmlDocument but I cannot get a XmlDocument unless I phisically create one, which obviously wont be a very good idea.
So I'm definitely stuck with these, I would really appreciate if someone could tell me how to do this...
Thanks in advance,
Pablo Pareja
PS: I'm using Berkeley dbxml 2.5.13

Hi Pablo,
        XmlDocument doc = manager.createDocument();
        doc.setContent("<bla/>");
        XmlValue val = new XmlValue(doc);
        System.out.println(val.getType() == XmlValue.NODE);
        System.out.println(val.asString());Try this. It doesn't create physically (that is in the container) a document. The output of this piece of program:
true
<bla/>Hope it helps
Vyacheslav

How to start the Oracle 8i client in redhat 7.2?

I have installed properly oracle 81 client and server properly.
I wanna access anothe linux server. But I don't know how to
start the clent ?..And what are should be done to access the
remote oracle server?
Thanks

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How to start working with iReport?

Hi All,
I'm just decide to use iReport for create report on Web but I don't know
How to start working with iReport , What program I should to install , How
to config any system files and set property .
Please advice me for work with IReport.
Thank you

Hi,
best hint to give is to start interviewing the product owner
http://ireport.sourceforge.net/cap3.html
Note that this is an open source project. Once you know which libraries you need, create a project in JDeveloper and double click on the project node. There is a Library node that allows you to import libraries to be used in your code.
Under Tools --> Manage Libraries you can configure JSP tag libraries if required
Frank

How to add proxy node in message monitoring RWB

Hi all,
in RWB message monitoring , i can see two options in drop down list those are integration engine and adapter engine. i want to add one node for proxy run time also.
can anybody let me know how to add a node for proxy runtime?
any document or help will be appreciated
Thanks
sandeep sharma

Hi,
connect your SAP application system (like ERP, etc.)
to SLD - the same one as PI uses (you need to have PIRWBUSER on ERP too)
then start transaction SPROXY and build and interface on it
start it and check if you see the new node in message monitoring
Regards,
Michal Krawczyk

How to start Weblogic 10.3.5 managed server on port 80

Hello,
We're trying to understand how to start Weblogic as root so we can start on port 80 on Linux. We understand that we'll use the post bind UID to run as a non-priv user. Right now in the Admin console under the managed server, Server Start properties (node manager) we have the weblogic user as the user to start the server, which works. Is this where we'd put the root user? We tried that but it fails complaining about root user didn't have permission to start the server. Can someone shed some light?
Thanks

Hi
1. You are asking for 2 things here:
a) Start Weblogic as root user ?
Before I answer this question, who (Which User) installed Weblogic Software and who created Domain. I hope its NOT root user. Usually its not preferable to use root account for this. Instead create a new user account like for example oracle or some xyz. Then login with that account. Install Weblogic and create any Domain. I would NOT prefer/recommend using root account to install weblogic. This means, I would not recommend/support to start weblogic as root user. The thing is when you install weblogic, it stores/creates lots of files/scripts. Now when you start, it has to be same user. Because at the startup, we need to read files and also CREATE lots of temp files under domain root folder. So on unix, this becomes very complex. Simple answer is if you install weblogic and domain with user say "xyz" and try to start domain with "root", you corrupted your entire domain. Some files gets changed to root user and some files just FAIL saying you do not have permissions. So its just gone. If you are a Unix Geek, do some magic and restore all permissions back.
b) Start Weblogic at Port 80
Very Simple. Forget about above thing. Install Weblogic and create domain say with user "xyz". Just go to domain root folder, open config/config.xml file and edit the localport to 80. By default at time of domain creation if you used all the defaults like port 7001, then you will NOT see this entry in config.xml file. But still you can edit config.xml file manually. Stop the servers. Add a section with listen-port as 80. Just refer docs for the steps. After this change, your weblogic server is now running at port 80. NOW, the main precautions is make sure that you do NOT have any other stuff running at the same port 80. Otherwise, Weblogic server startup will fail saying port 80 is already is in use.
Now if you want both a) and b), still it is possible. But I would NOT want/recommend a), which is use "root" account to install weblogic server and create and start the Domain. Nope, totally not recommending and supporting this. Yes, port 80 can be used, but not the "root" account.
Thanks
Ravi Jegga

How to start agent on the database host which is being Monitored

Hello All,
I have installed OEM 11.2.1.0. I have stopped getting alerts after the Node1 server is rebooted. I am monitoring RAC database.
When I checked the agent status on host I get the following output
[oracle@rs1pre91dvdba01 bin]$ pwd
/u01/app/oracle/agent11g/bin
[oracle@rs1pre91dvdba01 bin]$ emctl agent status
Environment variable ORACLE_UNQNAME not defined. Please set ORACLE_UNQNAME to database unique name.
[oracle@rs1pre91dvdba01 bin]$ export ORACLE_UNQNAME=MDM11
[oracle@rs1pre91dvdba01 bin]$ emctl agent status
EM Configuration issue. /u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba01_MDM11 not found.
[oracle@rs1pre91dvdba01 bin]$
And same on Node 2
[oracle@rs1pre91dvdba02 bin]$ pwd
/u01/app/oracle/agent11g/bin
[oracle@rs1pre91dvdba02 bin]$ export ORACLE_UNQNAME=MDM12
[oracle@rs1pre91dvdba02 bin]$ emctl agent status
EM Configuration issue. /u01/app/oracle/product/11.2.0/dbhome_1/rs1pre91dvdba02_MDM12 not found.
Please can I know how to start the agent on the nodes and also how auto the process of starting the agent on the Server reboot
Thanks.

[oracle@rs1pre91dvdba01 bin]$ env | sort
ASM_SID=+ASM1
_=/bin/env
COBBLER_SERVER=ccoshs02xvsat01.ccosvc.com
DB_HOME_BIN=/u01/app/oracle/product/11.2.0/dbhome_1/bin
DB_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
DISPLAY=localhost:10.0
DWH_SID=DWH11
G_BROKEN_FILENAMES=1
GI_HOME_BIN=/u01/app/11.2.0/grid/bin
GI_HOME=/u01/app/11.2.0/grid
GRID_HOME=/u01/app/11.2.0/grid
HISTSIZE=1000
HOME=/home/oracle/
HOSTNAME=rs1pre91dvdba01.pre.ccosvc.com
INPUTRC=/etc/inputrc
LANG=en_GB
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/dbhome_1/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
MDM_SID=MDM11
NLS_DATE_FORMAT=dd-mm-yyyy hh24:mi:ss
NLS_LANG=ENGLISH_UNITED KINGDOM.AL32UTF8
OLDPWD=/home/oracle
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_SID=MDM11
ORACLE_UNQNAME=MDM11
PATH=/u01/app/oracle/product/11.2.0/dbhome_1/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/sbin:/home/oracle//bin
PWD=/u01/app/oracle/agent11g/bin
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=172.30.0.43 54890 22
SSH_CONNECTION=172.30.0.43 54890 172.30.2.201 22
SSH_TTY=/dev/pts/0
SVN_EDITOR=vi
TERM=xterm
TNS_ADMIN=/u01/app/11.2.0/grid/network/admin
USER=oracle
Please can you tell me which variables needs to change

After install OIM, i how to start OID server?

after install OIM, i how to start OID server?

Hi,
1) Make sure that Weblogic Node Manager is running at background.
2) Make sure that all weblogic Managed Servers related to OIM (port 14000) and OID 11g LDAP Port 3060, LDAPS Port 3131, wls_ods1 (DIP & ODSM) is running on 7005 and WebLogic Admin Server is running on Port 7001.
3) Check whether all the OID Services are running by following commands
a. export ORACLE_INSTANCE=/u01/app/oracle/admin/oid1_inst
b. $ORACLE_INSTANCE/bin/opmnctl status
Regards,
ABP

How to start webstarterapp Node

Similar Messages

Maybe you are looking for