How to start with JTAPI

I need to give my project a telephonic interface.
How should I start. From where I can get material for making telephonic application

i would suggest you look into asterisk and the java-asterisk project. it's probably the easiest most cost effective way to integrate telephony into a java application.

Similar Messages

  • How to start with JDeveloper?

    As a straight A student of Computer Science, I put my hands on database development of an information system project for our CS faculty this summer. JDeveloper is used as the IDE for such project.
    I have learnt Java 2 and something about Oracle database in my courses. Now, after reading the product introduction and a short online course outline in iDeveloper2001, I have a brief idea about it. But since I can not afford much, how to learn more about it? Could you offer me some advices?
    Thanks a lot!

    The online users guide and documentation is the best place to
    start to learn how to use JDeveloper.
    - PSW
    Ram Purushothaman (guest) wrote:
    : Hi,
    : I am new to this Jdeveloper. I need to develop a intranet
    : project. Basically, I have to get the employee details from the
    : HR like work-telephone, email-address, etc.
    : Can somebody let me know how to start with Jdeveloper.
    Basically
    : I need to have a query screen (query by last_name or first_name
    : etc) and a result screen (results based on the query).
    : Any help is appreciated.
    : Thanks.
    : Ram.
    null

  • How to start with AOL

    Hi,
    Can anyone please provide me the documents on how to start and learn with Oracle apps AOL(technical).
    Please provide me the required documents to learn.
    Thanks in advance.

    Duplicate thread.
    How to start with AOL
    How to start with AOL

  • How to start with FPGA and LABVIEW when you do not know any computer language? Only have exposure to Windows OS.

    Myself is an Electronics Engineer. But I don't have any exposure to any comp language like C or whatever. I do not have any exposure to Labview as well. I've been involved in design and developing Digital Circuits like interlock units, Position monitoring and display systems etc. Now I want to work upon FPGA based circuits. Can anyone suggest me plz that how to start with?  

    Hi BNarendra;
    Here are some resources that can be useful, the first is an introduction to LabVIEW and the other ones are for LabVIEW FPGA.
    LabVIEW
    http://zone.ni.com/devzone/cda/tut/p/id/5247
    LabVIEW FPGA
    http://www.ni.com/swf/presentation/us/labview/lvfpga/default.htm
    http://digital.ni.com/public.nsf/allkb/0697A6F4BFC6E152862570FA0072153A?OpenDocument
    http://zone.ni.com/devzone/cda/tut/p/id/3261
    I hope the information is useful.
    Good Luck!
    Francisco Arellano
    National Instruments Mexico
    Field Systems Engineer - Energy Segment
    www.ni.com/soporte

  • How to Start With

    hi all,
    I am a java developer, i came across FB and FDS through my
    Friend, and soon, got addicted for the latest RIA development
    tools.
    I downloaded the Latest Trial of both FB and FDS and try to
    start things...but, i got stuck up at the initial configuration
    stage itself.
    can anyone point me to how to start with FDS and Java, any
    site URL or sample code....so that i will start working with
    FDS.
    cheers
    saikiran

    Hello There,
    There is plenty of stuff to start with for Adobe Flex. I will
    say start searching for tutorials available online & checkout
    flex developers blogs.
    www.adobe.com/devnet/flex/ is the best resource available,
    there are sample applications available along with the code,
    different blogs are also listed there.
    If you are java developer & have knowledge of Hibernate,
    I would suggest start with:
    http://blogs.adobe.com/mtg/2006/08/my_first_hibernate_enabled_fle.html
    Best of Luck!

  • How to start with CDC?

    Hi, friends:
    I have read much online material about CDC, but I'm still confused.
    I knew that I can download the WTK2.2 or higher to develop the app based on the CLDC and MIDP.
    My question is how to start with CDC. For example, If I use JBuilder, what stuff should been downloaded and installed? and how about the Eclipse?
    And some online learning resource is better!
    Thanks in advance!

    See
    http://home.elka.pw.edu.pl/~pboetzel/
    for HOWTO run SWT application on PocketPC (emulator). I used CDC 1.1 Personal Profile 1.1. You will find exact instructions what to download and install to write and run CDC applications. And also links to other guides and tutorials.

  • How to start with BSP

    Hi
    I am Vijay and i'm new to BSP.
    I want to know how to start with BSP and what kind of questions i can expext in interviews on BSP ...!

    Welcome to SDN.
    best place ot start learning BSPs is
    http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
    Regards
    Raja

  • How to start with Java TV API?

    Hi,
    I am new to Java TV API and i don't know how to start with it. Can any body suggest me what i would require(Software and hardware) to start coding in Java TV. Is MHP API are required for it if yes then how i can get those APIs??
    Thanks in advance
    Sajal Mahajan
    [email protected]
    Message was edited by:
    Sajal.Mahajan

    OCAP 1.0 and 1.1 specifications are avaible here:
    http://opencable.com/specifications/ocap.html
    tutorials:
    http://interactivetvweb.org
    Emulator:
    http://xletview.sourceforge.net/

  • How to start with OA Framewok.

    Hi All,
    Can you please let me know how to start with OAF and which software needs to install to start with.
    Also, please send me the document if you have for OAF.
    Thanks in Advance,
    Amol

    refer this http://prasanna-adf.blogspot.com/2008/11/new-to-oaf.html
    --Prasanna                                                                                                                                                                               

  • How  to start with bsp's

    i'm new to bussiness server pages, how to start with it.
    how to create a bsp application and work with it.

    hi phani,
    to start creating a bsp application,
    first go to se80 tcode, there select 'bsp application' category and create a new application.
    now you can start creating your first bsp application.
    use the following link for it :
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
    plz reward if useful.

  • How to start with RMAN as I am beginner?

    Dear all,
    How to start with RMAN as I am beginner? Any simple document or guide line for me.
    Thanks,
    Amy

    How to start with RMAN as I am beginner? Any simple
    document or guide line for me.go to yours oracle home directory /orahome/bin there is RMAN exe tool run it it will show you prompt RMAN
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle.  All rights reserved.
    RMAN> connect target sys/sys
    connected to target database: ORCL (DBID=1171886541)
    RMAN> backup database
    2> ;
    Starting backup at 21-JAN-08
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\SYSTEM01.DBF
    input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\SYSAUX01.DBF
    input datafile fno=00005 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\EXAMPLE01.DBF
    input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\UNDOTBS01.DBF
    input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\USERS01.DBF
    channel ORA_DISK_1: starting piece 1 at 21-JAN-08
    channel ORA_DISK_1: finished piece 1 at 21-JAN-08
    piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2008_01_21\O1_MF_NNNDF_TAG20080121T135924_3S8QQF74_.BKP comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:01:15
    channel ORA_DISK_1: starting full datafile backupset
    channel ORA_DISK_1: specifying datafile(s) in backupset
    including current controlfile in backupset
    including current SPFILE in backupset
    channel ORA_DISK_1: starting piece 1 at 21-JAN-08
    channel ORA_DISK_1: finished piece 1 at 21-JAN-08
    piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2008_01_21\O1_MF_NCSNF_TAG20080121T135924_3S8QSSN4_.BKP comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
    Finished backup at 21-JAN-08
    http://www.orafaq.com/faq/rmanKhurram

  • How to start with framemaker 11 for online documentation

    How to start with Adobe Framemaker 11 for online documentation?

    Hi,
    Try googeling and search for adobe actionscript code and tutorial e.g.:
    http://fmsguru.com/tutorials.cfm
    http://www.flashcomguru.com/tutorials/
    http://www.adobe.com/devnet/flashmediaserver/
    Good luck,
    Alon

  • How to start with a "clean slate"

    Appologies for such a simple question, but I want to start off on the right foot here. I've just got Tom Wolksy's FCE2 book and want to get started, but relized that my version of FCE opens a previous project that my wife had started some time ago when we first got the software. Windows and clips are all over the place. I thought using the New Project comand would get this stuff out of the way, but it does not seem quite that easy.
    Is there any quick way to make all of this old stuff go away and start with a fresh view of the program as if I was opening it for the first time. Unfortunately, Tom's book (like most really) starts from the ground floor and my work space in FCE is anything but this at the moment, and there is no real direction as to how to get to this point. Thanks for any advice,

    1) Designate a Scratch Folder for your new project; create a folder on the hard drive to which you will save your media
    2) Open FCE. The old project loads up. From the File tab, select Close Project. You will get an option to Save . .up to you
    3) Create a New Project and name the Sequence.
    4) From the FCE tab, select System Settings and point that to your new Scratch Folder
    5) Save As ... give your project a new name in a folder that you have created somewhere. I save my projects on the system drive where FCE is, not on the scratch disk where the media is stored

  • How to start with Discoverer - Oracle Apps - New Org Setup

    Hi,
    Our discovered expert retired and unfortunately no docs are available.It is in use for existing Operating units(11.5.10) Now i wanted to setup discoverer reports for newly setup OU;s.
    How do i start with ?Any help is appreciated.
    Rgds-PV

    Welcome
    http://www.oracle.com/technology/documentation/applications.html
    You can download from here.
    Regards
    Asif Kabir
    -- If helpful mark the post as correct/helpful, also close the thread as answered.

  • How to start with mail

    HAllo everybody,
    i try to develop an application with java, in which i need to send e-mails to users.
    but i don't know how i should start with it.
    i have some problems
    1)should i install a mailserver to use smtp? if yes is there any free mailservers??
    2) how van i realize to send mails? is there any usefull link or documantation??
    thanks

    Read the "Javamail FAQ" (Google it if you can't find the like on the site, it's the first hit).
    All your questions are answered there.
    travis (at) overwrittenstack.com

Maybe you are looking for

  • Data from SAP BW

    Hi All. If the data is coming from SAP BW to SAP APO for DP then where the data will go ? Can the data from SAP BW come directly to Planning Area. If so then how to see the data in Planning Area. Thanks a lot in advance for your help, Prabhat Sahay

  • Standalone ITS 6.20 - wgate install - web instances not all visible

    When trying to install an ITS Wgate (dual host), I am not seeing all available IIS instances during the install process.  Only 4 of about 10 available are there when I am at the point of designating which IIS site the ITS Wgate instance should use. 

  • How to setup JCOs in CE 7.1 Developer Edition

    Hi, I am preparing a few scenarios on the EP1 for CE 7.1: 1.) I am using Enterprise Services from ES workplace. But I believe I need to setup JCOs first. Is there a complete document on how to do this in Content Admin for CE 7.1? Where can I find it?

  • Authorization for op type neut.

    Friends I want to give authorization  with respect to specific output type NEUT.User should be able to acess that output type only after po release.Currently user can enter this output type without realse.How to activate NEUT only after release has a

  • Nokia C3 - When to expect the next FW update (Open...

    Yesterday my two Nokia C3-00s finally arrived (one for me and one as a Christmas present for my girlfriend so we can chat while not together), both equipped with the 04.60 FW version and I was more than disappointed to find out what a completely usel