How to stop a deploying process?

Hi all,
I am deploying two functions for almost half an hour, and they seems to be deploying forever. I check the repository browser, and status says 'ready'.
How can I stop the depolying? or anybody know why this happens?
thanks

Thanks for your reply!
I did this. Sometimes successfully, sometimes not...
But I think this not normal and this is not THE solution.
Why does Apple didn't fix this issue? As I already wrote: this problem last FOR YEARS.
See, I'm very simple: I see a button, I click on it, I'm expecting it works...
Am I asking for "too much"?
I'm also very surprised not finding anybody discussing this issue on the forums...
Should I be the only one experiencing the problem?
I'm not very proud of this particularity...
Message was edited by: Evita-The-Best

Similar Messages

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to stop the backup process....

How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...

i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...

How to stop and start process SAPOSCOL

Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
Collector           : running
Start time coll.    : Mon May 21 17:49:49 2007
Current Time        : Mon Jun 11 13:27:51 2007
Last write access   : Tue May 29 06:23:46 2007
Last Read Access   : Mon Jun 11 13:26:24 2007
When i try to stop the saposcol i get the following error:
igzadm> saposcol -k
Setting Stop Flag :
13:24:44 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
13:24:44 11.06.2007   LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
      Please kill collecting process.exes.
Am doing this command through SID<ADM> from change directory /run.
Please help me how to check the permission of the SIDADM to stop the services.
I also try the same from root user but now use..
Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
Advance Thanks.
Suri Tyson

Hi, i have the following permission for saposcol
imserv:/ # ps -ef | grep saposcol | more
    root 118842 528422   0 14:02:17 pts/2 0:00 grep saposcol
I have changed the ownership as you mentioned....
imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done
However, i still get the error as:
igzadm> saposcol -k
Setting Stop Flag :
14:12:13 11.06.2007   LOG: ==== Stop Flag was set by saposcol (kill_collector()).
14:12:13 11.06.2007   LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
      Please kill collecting process.
Now the permission are set in my system as:
igzadm> ps -ef |grep saposcol|more
igzadm 729196 983058   0 14:13:25 pts/2 0:00 grep saposcol

How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

How to stop update work process

hi
this is mahesh
in my dev server 3 update workprocess are running very long time .how to stop that 3 update workprocess .i am already deleted the error update record in sm13
pls tell me how to change this work process running mode to waiting mode.pls give me solution.

Hi mahesh,
I guess you want to terminate the workprocesses.
Go to SM50 select the update process you want to terminate then in menu bar goto <b>Process </b> and then select <b>Cancel without core</b>.it might take some time but the workprocess will get terminated.
In case it takes too much of a time kill it at OS level.
Please award points accordingly.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

How to stop a triggered process chain

Hi,
Does anyone know how to stop a process chain? It was accidentally triggered twice and we need to stop it. Thanks.

Hi,
There r 2 ways to kill the job.
One is using transation RSMO locate the job and display the status tab double click on the yellow light that is shown on the line total, a pop will come 'set overall status ' is displayed select the desired status that is red and save it. Then return to the monitor page and select the header tab double ckick on the data target right click and then goto 'manage',there should be request sitting there probably with yellow lights , highlight the line with the faulty request click the delete button then click refresh button.
Second is goto SM37 and click on the active selection and enter the jobname and then click excute the particulr job should appear highlight the jobname then click on the stop iconthat appears on the taskbar( 3 rd from left)
hope it is clear.
Regards-
Siddhu

PFRD 11.1.1.4 - How to stop the In-process Reports Server

I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:

in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
Paulo

Thanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo

How to stop running Backup process by BRTOOLS ?

Dear All,
We r using HP-UX -- OS for SAP system. We run backup process by DB13 TC.
once the backup started, we can not log in till backup process ends.
If we want to stop this process in between then how to stop BACKUP process safely ? We have to use BRTOOLS ?
Pl' give right method ..............

Hi,
Just confirm whether you are doing a disk to disk backup or disk to tape backup.
Disk to Disk - It copies the files from oraarch filesystem to logbackup, and sapdata1,2,3... to sapbackup filesystems respectively. This is scheduled through brtools (DB13). This affects the performance tremdrously.
Disk to Tape - This takes all the files from sapbackup and logbackup filesystems to tape. this doesnot affect the performance.
We can kill the backup scheduled by brtools,because there is always a background job is triggered for the backup, the jobs always start with DBA*. Then kill that job, with help of pid from SAP level or OS level. but I doubt that the stopped backup can be used for recovery for future use.
With regards
Sudha

How to stop Application deployment in sccm 2012?

Hi All
If a application is wrongly deployed to wrong collection in sccm 2012
how to stop that and where to change settings like we used to do in sccm 2007 we can
stop it by program properties.

You have kind of the same feature with Applications in CM2012. You can just right-click an Application, and select "Retire".
That will change the status of the Application from "Active" to "Retired", and should prevent installations. When you've fixed the problem, you can just "Reinstate" the Application again, and everything should be back to normal.
But I totally agree with Jason. Make sure you do the proper testing, so you won't have to do this at all :-)
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

How to stop a Copy process?

For years I have never been able to stop a Copy process.
When I click on the "cross" button (near the progress bar) in the Copy window, nothing has ever happened!
Copy refuses to stop!
Any tip or clue?

Thanks for your reply!
I did this. Sometimes successfully, sometimes not...
But I think this not normal and this is not THE solution.
Why does Apple didn't fix this issue? As I already wrote: this problem last FOR YEARS.
See, I'm very simple: I see a button, I click on it, I'm expecting it works...
Am I asking for "too much"?
I'm also very surprised not finding anybody discussing this issue on the forums...
Should I be the only one experiencing the problem?
I'm not very proud of this particularity...
Message was edited by: Evita-The-Best

How to stop th activation process of DSO in process chain

Hi,
we are loading the DSO by two load processand followed by activation process, but here one of the load process failed and i need to correct it manually, but when i make the failed request red in dso the next activation process is started. can i stop this activation process?, because i had to run this process after i manually correct the load request.
thanks

Hi,
You can stop or kill this job, by identifying the work process number and app. server from job log of activation job. by right clicking on activation process -> display message-> you can get this details. once you know about the server and work process, then go to SM51 -> select the app server and then select the work process and cancel it from menu options.
When you are loading 2 requests in parllel to a data target, it is always better to have an AND process before activating the Data in DSO. It will aviod this kind of errors and killing other jobs.

How to Stop Forward scheluding process in Sales order(VA01)

Hi ,
How to Deactivate forward scheduling proposal in sales order.....
In current systen, we have both forward and Backword scheduling process based on the material availability.
What is the customization required to do in SPRO or Master dsata changes to stop forward scheduling proposal in sales order....
Thanks & Regards
Sudheer Madisetty

HI Gopal,
Thanks for your reply
Apart form OVLY, Any other customization required to be done...?
Regards
Sudheer

How to Stop a BPM Process

Hi,
I have a scenario in which the BPM process went thru an endless loop. There was a logical flaw but the point is that there was no way to kill this process which was running through BPM . We tried RWB, BPM Engine Mointoring but with no success.
In MONI all we see is a clock symbol next to PE icon.
It would be really helpful if someone can tell me how to kill a process running in BPM engine.
Both MONI and RWB tell me the message is Successful therefore cannot be stopped but internally the message is going through BPM workflow and never comes out.
Thanks
Ashish

Hi Ashish,
Logon to the ABAP stack of XI.
Execute the transaction "SWWL" to delete the workflow items.
Regards,
Sridhar

How to update a deployed process

Hi,
What's the proper way to update a process already deployed to weblogic server?
Here's the situation: I've previously deployed my application to the weblogic server, but then I modified the process by adding an additional human task to the start of the process. I deploy it with the same deploy settings as before, and I expect that when I initiate the process, the first task in the worklist will be the new human task I created. But when I tested it, it still shows the old first task. I tried undeploying the old composite first, then redeploying, still same problem.
I thought I might need to increment the version id, so I changed the deployment to set the composite version to "1.0.1" but this time the deployment failed with the error that the unique constraint on SOAINFRA.BPM_CUBE_GLOBALCREATETASK_PK was violated (the PK on this table is PROCESSID)
Any idea how I should go about this?
Thanks!

Hi,
we have the same problem actually.
The life cycle of the complete workflow is over one year.
(We are using subprocess, call them dynamicly... but when processes is waiting a notification, that is not a solution!)
--> Actually we use the API of the workflow to fork processes (with an option that use the new version of definition), "retry" activities in the new process on the same "position" as in the "old process" (Note: That's not always possible - if activity renammed or deleted by example --> Go back to previous correct activity).
That is working fine... for 85% of our cases.
Our actual problem is that some of our process use inter process synchronisation. To solve that, we need the execution sequence of the old activities.
:-( Actually whe can't retrieve the "correct execution sequence" of the activities.
If some of you knows how to retrieve the order of execution order of the activities, I will help us a lot.
(The problem is that there is a begin date for that, but precision is "second"... not enough precise... should be at least a milli second).
--> We are trying to find out the execution sequence by analysing the process definition... But it seems that it will be complicated and long to program.
Any help is welcome.
Stephane

How to stop a deploying process?

Similar Messages

Maybe you are looking for