How to STOP a QUERY

Is it possible to stop/break a QUERY in Forms?

Oliver,
Please check the "Interaction Mode" form property.
Prepare to wait at least 6 seconds before the "Cancel Query?" alert appears.
And no, there is no control over that alert.
If Interaction Mode is blocking (the default), Oracle Forms doesn't care which keys you are pressing (except for ctrl+alt+del on Windows 9*, probably).
Hope this helps,
Pedro

Similar Messages

How to stop specific query attached with other query in same process using With method

Would it be possible to stop one query out of two queries attached to single process...because i see it is returning one IDisposable inteface...if i call dispose() method...two queries are stopped/killed...
So how to stop specific query which is combined with other queries in a same process at runtime i.e., attach or detach kind of thing?
Thanks in advance
Satish

Yes, the overloading of the term "Process" can be confusing. In SI, depending on your edition of StreamInsight, a process can run on one or more threads from a pool of threads and are scheduled together. Don't think of a process necessarily as a single
thread or multiple processes as a method of multi-threading.
As for a limit on the number of queries, there isn't a hard limit that I'm aware of. However, there will be a practical limit that will vary based on the complexity of the query, the event rate and your hardware (# of cores). If you are using Standard Edition,
this limit is much smaller as you only have a single scheduler thread. With Premium Edition, you have a scheduler thread for each core on the machine so you can get higher throughput and lower latency. But if you have, say, 4 cores on the machine (don't count
hyperthreaded cores, just real cores), 100 queries and a target throughput of 100K events/second, you'll likely have some problems. At 1K events/sec, you'd likely be fine though. With 32 cores and Premium Edition, you'd probably be OK with 100K events/sec.
So ... like I said, it depends.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

Newbie to sql developer, how to stop a query

Hi All,
A very basic question and I've searched through this forum and Tom's site, i think i read it somewhere but i forgot where and what it was.
How can I stop a query running in Sql Developer with what key combination?
Ctrl-C D E Q .........., help!
When I 'leave' for another application there a nice grey screen appearing so i can't use the buttons.
Thanks in advance and my appologies if there is an answer already and I didn't find it.

A query in the worksheet can be stopped using the Cancel button in the worksheet's toolbar (the 5th button). Hovering over it, you see the default hotkey assigned is "Ctrl-Q".
If you get a gray screen means your SQL Developer locked up. There's currently no way of canceling what is locking him up. You could kill its session, but that's pretty radical and takes its share of time fining out what to kill and how.
What another user on this forum (EricH) suggested, is running 2 SQL Developers side by side. When 1 locks up, he uses the other one. Although I'd like SQL Developer in the future to run it's queries in separate sessions by itself, thus preventing the whole program to lock up.
K.

How to stop a query on a last record?

I have a basic question. I have put a button on my form, which goes to the next_record (it goes on id-es). (on when button pressed action)
But I have a problem, when it comes to the last_record, it goes to the nex record which is not there ( it does not exist). I would like to stop the query on my last record. How to do it?
I had sometihng like it
if :atletika.idRezultata is null
last_record;
else
next_record;
end if;
but its not working.

Hai,
If the block's INSERT ALLOWED property is set to YES, then it will go to new record.
Try setting this property to NO
Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

How to stop a Scheduler Job in Oracle BI Publisher 10g

Hello!
Can someone tell me how can I stop a scheduler job in Oracle BI Publisher 10g?
I scheduled a bursting job to run a report but is running during two days.
I would like to stop it.
Thanks.
Edited by: SFONS on 19-Jan-2012 07:16

Unfortunately there is no way to stop a job once it is being executed. Yes as you read, it is not possible once job has started.
Same thing applies for running queries.
Once queries are sent to the DB BIP loses control over them. The message you see (if any) "Click Here to Cancel" does not stop any query
it is just a message.
I guess you will have to stop/kill the process in your DB
regards
Jorge
p.s If you consider your question answered then please mark my answer as *"Correct"* or *"Helpful"*

Stopping a Query taking more time to execute in runtime in Oracle Forms.

Hi,
In the present application one of the oracle form screen is taking long time to execute a query, user wanted an option to stop the query in between and browse the result (whatever has been fetched before stopping the query).
We have tried three approach.
1. set max fetch record in form and block level.
2. set max fetch time in form and block level.
in above two method does not provide the appropiate solution for us.
3. the third approach we applied is setting the interaction mode to "NON BLOCKING" at the form level.
It seems to be worked, while the query took long time to execute, oracle app server prompts an message to press Esc to cancel the query and it a displaying the results fetched upto that point.
But the drawback is one pressing esc, its killing the session itself. which is causing the entire application to collapse.
Please suggest if there is any alternative approach for this or how to overcome this perticular scenario.
This kind of facility is alreday present in TOAD and PL/SQL developer where we can stop an executing query and browse the results fetched upto that point, is the similar facility is avialable in oracle forms ,please suggest.
Thanks and Regards,
Suraj
Edited by: user10673131 on Jun 25, 2009 4:55 AM

Hello Friend,
You query will definitely take more time or even fail in PROD,becuase the way it is written. Here are my few observations, may be it can help :-
1. XLA_AR_INV_AEL_SL_V XLA_AEL_SL_V : Never use a view inside such a long query , becuase View is just a window to the records.
and when used to join other table records, then all those tables which are used to create a view also becomes part of joining conition.
First of all please check if you really need this view. I guess you are using to check if the records have been created as Journal entries or not ?
Please check the possbility of finding it through other AR tables.
2. Remove _ALL tables instead use the corresponding org specific views (if you are in 11i ) or the sysnonymns ( in R12 )
For example : For ra_cust_trx_types_all use ra_cust_trx_types.
This will ensure that the query will execute only for those ORG_IDs which are assigned to that responsibility.
3. Check with the DBA whether the GATHER SCHEMA STATS have been run atleast for ONT and RA tables.
You can also check the same using
SELECT LAST_ANALYZED FROM ALL_TABLES WHERE TABLE_NAME = 'ra_customer_trx_all'.
If the tables are not analyzed , the CBO will not be able to tune your query.
4. Try to remove the DISTINCT keyword. This is the MAJOR reason for this problem.
5. If its a report , try to separate the logic in separate queries ( using a procedure ) and then populate the whole data in custom table, and use this custom table for generating the
report.
Thanks,
Neeraj Shrivastava
[email protected]
Edited by: user9352949 on Oct 1, 2010 8:02 PM
Edited by: user9352949 on Oct 1, 2010 8:03 PM

How to stop the cluster node form leaving the Grid.

Hi,
I am new to Oracle Coherence.
I used the following tutorial to get started with Coherence.
http://www.oracle.com/technology/pub/articles/vohra-coherence.html?msgid=6521631
Within JDev an Coherence instance is started, data is entered and queried.
Next I'd like to connect this to a running Coherence instance, (started with [java -jar coherence-home\lib\coherence.jar)
When I start the coherence from cmd and run the application from within JDev, I can see a connection is made
The log says as
2008-07-23 07:03:56.304 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, memb
er=1): Member(Id=2, Timestamp=2008-07-23 07:03:56.117, Address=64.181.243.150:80
89, MachineId=1686, Location=process:4548@SDCHS20I189) joined Cluster with senio
r member 1
Map (?):
2008-07-23 07:03:56.742 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, memb
er=1): Member 2 joined Service DistributedCache with senior member 2
Map (?):
2008-07-23 07:03:58.023 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, memb
er=1): TcpRing: connecting to member 2 using TcpSocket{State=STATE_OPEN, Socket=
Socket[addr=/64.181.243.150,port=8089,localport=4958]}
Map (?):
2008-07-23 07:03:59.007 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, memb
er=1): TcpRing: disconnected from member 2 due to a kill request
2008-07-23 07:03:59.007 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, memb
er=1): Member 2 left service DistributedCache with senior member n/a
2008-07-23 07:03:59.007 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, memb
er=1): Member 2 left Cluster with senior member 1
Is the leaving of node is pre defined. How to stop this. What changes has to be done in the config.xml file.
One more thing.I am not able to see the data i enter through the Jdev Application. To see the data i did the following
Map (?): cache DBBackedCache
2008-07-23 07:08:17.820 Oracle Coherence GE 3.3.1/389 <Info> (thread=main, membe
r=1): Loaded cache configuration from resource "jar:file:/D:/coherence/coherence
/lib/coherence.jar!/coherence-cache-config.xml"
2008-07-23 07:08:18.226 Oracle Coherence GE 3.3.1/389 <D5> (thread=DistributedCa
che, member=1): Service DistributedCache joined the cluster with senior service
member 1
<distributed-scheme>
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<scheme-ref>example-backing-map</scheme-ref>
</local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
Map (DBBackedCache): list
Map (DBBackedCache):
Thanks in advance

Hi Jona,
   Sometime Inner Events might cause this problem.
   While handling events avoid processing/handling inner events. pVal.InnerEvent is a boolean property that helps you to identify this issue. So I suggest you to use EVENT FILTERING, if you are not doing that. Let me know if you still have issue.
   As Ad Kerremans said, you try to catch events by global try catch.
HTH
With Regards
B.Ravi Shankar

How to check RBS maintainer is running or not and how to stop the RBS maintainer for a specific content db.

HI
how to check RBS maintainer is running after deleting orphan blobs and while deleting the blobs from rbs storage,
and also how to stop the RBS maintainer for a specific content db.
when I run below query I found the orphancleanup value true
SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
where config_key='orphan_cleanup_in_progress'
adil

HI
the RBS maintainer was run from one of web front end server And for one content database , that fine
but I now know this information only this did by other administrators.
Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and　 also I found this maintainer running I checked from when　 run sql queriy in 　sql
server
SELECT
[config_key],[config_value]
FROM
[mssqlrbs_resources].[rbs_internal_config]
where
config_key='orphan_cleanup_in_progress’
it 　given me true
here now I want to stop this orphan cleane up , what settings and script I will run?
adil

How to copy a query

Hi everyone,
Can any one please tell me how to copy a query?
just explain me the steps....pls
Thanks in advance,
Soumya

Hi,
If you want to copy the query on same InfoProvider, you can use the 'Save As' option.
If you want to copy the query from one InfoProvider to other, you can use the transaction RSZC. But InfoProvider structure must be same before using the RSZC option.
If your InfoProvider structures are not same, then you can use a function module to copy the query.
There is one function module available to copy the queries from one target to other. We can achieve the copy even if the Source and Target InfoProviders are different.
Here are the steps..
Step 1. Bypass the standard functionality.
Use transaction SE37 and enter the function module name RSZ_I_COPY_QRY_TO_CUBE.
Set a breakpoint after the line Perform check infocube to manipulate the SAP BW original compliancy check. Search for and set the breakpoint at IF l_subrc 0 OR l_is_compliant = rs_c_false .
Step 2. At the next stop in coding, enter the InfoProvider name in the occurring dialog in your defined breakpoint. In debug mode, set the return parameter l_is_compliant to X by typing the parameter name l_is_compliant in the field name input box
Step 3. Copy the query.
The system next asks you what query to copy The system believes that the target InfoProvider is compliant, but displays the objects that could not be found and copied Step 4. Add the missing elements.
You can add the missing characteristics manually after copying the query.
Regards,
Yogesh

Stop refresh query in WAD

Hi Gurus,
How to stop refresh the query in WAD ? Any advice I would appreciate it.
Thanks
Liza

Hi Liza,
I hope you should unschedule the process triggered in reporting Agent.
Hope it helps.
Regards,
Vicky

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

How to STOP syncing with Outlook via GPRS?

I use an unlocked iPhone 3G with a prepaid mobile card.
Everytime I open my Calendar function on the iPhone (just to see the days and dates) the iPhone attempts to sync over the air with my Outlook account calendar via GPRS.
This costs a bomb on the prepaid card, and I want to stop the sync function.
Would someone kindly tell me how to STOP the iPhone from syncing with my Outlook Calendar?

If calendar events are synced over the air, this means you are accessing an Exchange account or a MobileMe account.
If you don't want to sync calendar events over the air with the account, you need to turn Calendars off for over the air syncing for the account preferences on your iPhone. This will erase all calendars and calendar events from your iPhone and you will need to sync direct with a supported application on your computer via the iTunes sync process. If an Exchange account with Outlook on a Winblows PeeCee, this will not be possible.

How to stop syncing the photos only on facebook

how to stop syncing the photos only on facebook

corg2333 wrote:
yeaa but it is not only on facebook i think..
Disable the automatic spell checking service in your browser.
Safari
--> Edit --> spelling and grammar --> uncheck "check while typing"
Firefox
http://support.mozilla.com/de/questions/500215

How to stop voice control

how to stop voice control?

Hi Joannewpark,
Press your Home Button to get to the Home Screen.
Press Settings, then press again 2x fast - you will go to the Settings screen
Press on General, then press again 2x fast - you will go to the General screen
Use 2 fingers to indicate scroll up - Voice Over will begin to read the items on the screen, and will eventually get to the Accessibility option. When it says "Accessibility" press on it, then press on it 2x fast
It will go to the Accessibility screen, tap on the Voice Over option one, and then again 2x fast, now tap on the Voice Over option again, and then double tap to turn it off.
Cheers,
GB

How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save. I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was. I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink." That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box. But as soon as I save (command S), the text box reverts to a hyperlink.
If I don't click save and move around the pages, it does not revert to a hyperlink. It only reverts to a hyperlink when the file is saved. Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
The website page is: http://www.usronline.net/USR/VedicResearch.html. If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file. This should not be, but I can't get this hyperlink to go away for good.
Many thanks in advance.
Vishnupriya

Please pardon the reply delay--a big project deadline had to be met. Now back to this work:
Yes, the text in the oval object had a drop shadow (the oval object itself did not). I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object. I deleted the text and then the image file icon disappeared. But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again. I deleted the oval object entirely and simply typed the text inside the main text box itself. The image file icon that was attached to that oval object is gone (along with the oval object).
Still the image file icon is attached to the main text box, though. I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink.
Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one). Still in the new text box with the pasted text, the image file icon shows in the upper right corner.
I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond." I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
Thank you.

How to STOP a QUERY

Similar Messages

Maybe you are looking for