How to stop a queue - urgent

Hi Gurus,
I am working CRM MW and am getting infinite no. of queues(may be I have missed some condition in FM). Now I have inactivated my FMs in R/3 ,deregisterd the FMs in table and deleted the outbound queue in CRM.
Still I am getting so many no. of queues.
can anyone help me in this regard.
Full reward points will be given.

Hi Kumar,
Can you please explain your problem in more detail . What exactly you have done in R/3 & if you have created a FM in R/3 why you are getting outbound queues in CRM outbound.
If you make the statement clear it will be easy for us to help you.
Best regards,
Vikash.

Similar Messages

How to Stop MCEX Queues

Hi,
Is there any way to stop data getting posted to MCEX queue. If there a way what is impact if we stop.
Any help would be rewarded..
Regards
Prasad

Hi Soumya,
Its very easy to solve this queue problem. Once i also faced the same problem.
Then i tried to do all the above they said..then i made a call to Online support service ..OSS note..they will help you to solve this..then What i understood is..the sender/receiver adapter..unable to reach the receiver..that means..1. Network connectivity problem.2..Receiver server may be down..3. Path may be changed.. Try..to check this ..you will be landed with solution easily...Thanks..
Regards,
Kumar

How to stop a thread forcefully. do reply urgent

i would like to stop the thread . i have used stop() method and also i have tested by giving the threadname = null. but these two not worked . how to stop thread forcefully. urgent.
with regards

There is no direct way to stop the thread forcefully. If you have implemented the thread, modify the code so as to break on some flag.
i.e.
public void run()
while (keepRunning)
...do some stuff here
and provide some way to set the boolean keepRunning as false. The loop will exit and the thread will also be destroyed.

How to stop PO output when the indicators are updated with a prog. **URGENT

Hi,
I have developed a update prg which will update the Final invoice indicator and Goods reciept indicator in SRM as well as in R/3 only for 'ORDERED' PO's. This was done using BBP_PO_PD_UPDATE FM. Everything is working fine, all the indicators are getting updated as expected both in SRM and R/3.
Only problem is that when the indicators are updated in SRM, PO Output is getting generated which should not happen.
Do you have any idea how to stop the OUTPUT.
This is very urgent.
BR,
Parvez.

PO output
PO Output problems
disable PO output on po change in SRM

How to start and stop a queue in ECC??

Dear all,
I have a problem regarding the Start and Stop of queues in ECC. Whenever I change the data in ECC (for example extension of a material to a new distribution chain, or Creating a quotation which has to trigger a corresponding quotation in CRM), replication is not happening to CRM. On analysis of the outbound queue in ECC, we are finding corresponding ernties for the material / quotation. On dbl cliking an entry, we are able to see the queue in STOP status. When tried to reset status and activate, system throws a message saying GENERIC STOP SET.
1) How to overcome this problem?
2) How to START or STOP a queue (for Eg: R3AD*) in ECC?
Please respond.
Every point you share will fetch so many points / lot many smiles to you (No surprises.. I am plagerizing the famous quote on SDN)
Regards,
Rajesh

Dear Chandra,
Thanks for ur quick response. I have awarded you a sixer. Ofcourse, the content is much richer than that. But if i award 10, thread has to be closed. So that stopped me from awarding that
Dear all,
Can someone else share their views?
Regards,
Rajesh

How to stop facebook network notifications...urgent plzzz

hey
i have been receiving facebook notifications, in the form network notification written on top of the screen from past many days ...these notifications are titled as network notifications....these notifications are neither in the form of messages or email and they disappear once i see them....i have not subscribed for any text notification on Facebook but still i am receiving these notification at odd times during night.....plzzzzz tell me how to stop these notification.....plzzz urgent....
tanxxx

Hello rishabharora and welcome to the BlackBerry® Support Community Forums.
To clarify, you are receiving emails from Facebook® stating they are a network notification? Would it be possible to have a screen shot of this email?
If the emails are not from Facebook, who is sending email?
Do you use the Facebook® for BlackBerry® smartphones application?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

** How to stop a particular queue completely in SMQ2 tcodes

Hi,
I have nearly 6000 messages in various queues in SMQ2 tcode (Inbound queues). For example,
XBTO1_0001    1875
XBTO1_0002    2335
XBTO1_0002    1770
Messages are processed slowly. When we tried to stop a queue, only one message is stopped in the queue. Instead we want to stop complete 1 queue. Then, we feel that remaining queues will work fase. So, how to do this ...?
Kind Regards,
Jeg P.

Hi,
1) Why the queue XBTZ is not displayed in SMQR tcode ? (But, it is* displayed in SMQ2)
--->are you sure that the queue XBTZ* is active. Because in SMQr you could see the queues which are active and are already registered.
Re register the queues and make it active.
Try to make the ragistration of queue "XBTZ*" in SMQR.
Press directly Registration tab and rgister the queue then deactivate it.
http://help.sap.com/saphelp_nw04/helpdata/en/59/d9fa40ee14f26fe10000000a1550b0/frameset.htm
Go to SMQR and check the Scheduler Status i.e first line of the Screen. If it is Wait or any other status, then make sure that all Queues are registered.
Also.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
2) If we 'Deregister' the queue, any effect will come for the new messages ?
If we Deregister the queue then the queue is no longer processed.
http://help.sap.com/saphelp_nw04/helpdata/en/29/595f3ca0dd9770e10000000a114084/frameset.htm
thanks
Swarup

How to stop/cancel Process Chain in BI 7.0

Hi,
Could you tell me how to stop/cancel a process chain that hangs with status yellow or green in BI 7.0? There was an easy option to do it in 3.x, but I cannot find a similar option in 7.0.
What happens is that at random our process chains hang at a certain variant with either yellow or even green status and do not proceed further. What happens is that in a couple of hours another pchain run occurs and it executes fine. Then again at random (might be the same day or the next day) the process chain hangs again. I think that all those "hanged" pchains pile up in the queue, so that it cause other future pchains to hang as well at some point. So, is there anyway to stop/cancel these zombie process chains when it stops at a particular event RSPROCESS in BI 7?
Thank you,
AG
Message was edited by:
AG

Hi Frank,
Thanks for your reply. I have a few questions.
1)SM37 -->Kill Job
We cannot do that because the job has already finished.
2)SM50/sm66- ->Kill process
There are no hanged processes to kill
3)RSPC>Job Log>Make the process RED forecefully
How do you do that exactly?
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical) - we can do this, but what exactly would it accomplish. Would it remove the process chain from any runs in the future or also any hanged ones in the past? An how is this step different from #4?
Thank you,
AG

How to stop and remove an active job.

How to stop and remove an active job.

What sort of "job" are you referring to? A print job? If so, open the queue for the printer - it should be in your Dock, or you can access it through the Printers & Scanners system preference - and click the green Pause button to stop the entire queue, or the Pause button next to a specific print job to pause just that job. To clear a job, click the "X" button to the right of the job.
If that's not the "job" you mean, please post back and clarify.
Regards.

How to purge Workflow queue after R12 upgrade before starting WF Mailer?

Hi,
We are about to upgrade to R12.1.3 from R11.5.9.
As part of the testing, I configured and started the Workflow Mailer in the new system. As soon as I did that, the system started sending a ton of notifications regarding past Requisition approvals apparently queued in the system. WF Mailer has been down since I did the last upgrade test.
We plan to approve all requisitions before the cutover in the old system, so there should be no email notifications pending. Is there a way of updating msg_state of those notifications in the wf_notification_out table with a value of "READY", so we can make sure that we will have a clean system and users will not receive any notifications regarding the past requisition approvals?
Thanks,
Sinan

Please see these docs.
Note: 847889.1 - Stop Workflow Notification Emails During Clone
Note: 828812.1 - How To Stop Old Outbound Workflow Notification Email Messages During Clone Activity
Note: 603003.1 - How To Remove Workflow Data On A Test Or Cloned Instance
Note: 372933.1 - How to purge e-mail notifications from the workflow queue so the e-mail is not sent
Note: 736508.1 - How to Cancel Email Notifications for Particular Workflow Type
Regards,
Hussein

HT2188 How to stop the battery from draining

How to stop the battery from draining

I tried everything to stop my battery from draining on my iPad 2 since I have downloaded IOS 7.... Without success. Very disappointed with IOS 7 so far. Apple please release a patch to stop the battery from draining. It is urgent. My iPad is now useless, it is always drained to 0% everytime I open my iPad!?!?!

How to stop printer icon staying in dock everytime i print

hi all
basically i want to know to stop how to stop printer icon staying in dock everytime i print
whenever i print it stays there, and doesnt disspear everytime automatically

When you print your next document, right click or control click on the printer icon in the Dock. This will provide you with a menu of options. One of them is Auto Quit. Select it. Quit the printer queue and then print another document. The printer "app" will now quit after a successful print.
Hope this helps.

How to stop a dead message in MDB

I have MDB like the below.
Suppose database fail to insert data but the message still send again again
How to stop message send again again when db exception occur.
How about this property: @ActivationConfigProperty(propertyName = "maximumRedeliveries", propertyValue="0")
Not sure.
Anybody give a hand for help.
Thank in advance
@MessageDriven(mappedName = "jms/aliofiot", activationConfig = {
@ActivationConfigProperty(propertyName = "acknowledgeMode", propertyValue = "Auto-acknowledge"),
@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue")
public class aliofiotjmsBean implements MessageListener {
@Override
public void onMessage(Message message) {
// call session bean to insert database here
}

Of course, i have try catch on every single part of code.
I thing here is the problem of transaction, if if not success insert into database then rollback and try to re-send the msg again again.
I search on net and see one annotation: @TransactionAttribute(TransactionAttributeType.NOT_SUPPORTED)
after use it with other one: @ActivationConfigProperty(propertyName = "maximumRedeliveries", propertyValue="1")
Then now my system it is OK, but i am not sure what happen in future.

How to STOP syncing with Outlook via GPRS?

I use an unlocked iPhone 3G with a prepaid mobile card.
Everytime I open my Calendar function on the iPhone (just to see the days and dates) the iPhone attempts to sync over the air with my Outlook account calendar via GPRS.
This costs a bomb on the prepaid card, and I want to stop the sync function.
Would someone kindly tell me how to STOP the iPhone from syncing with my Outlook Calendar?

If calendar events are synced over the air, this means you are accessing an Exchange account or a MobileMe account.
If you don't want to sync calendar events over the air with the account, you need to turn Calendars off for over the air syncing for the account preferences on your iPhone. This will erase all calendars and calendar events from your iPhone and you will need to sync direct with a supported application on your computer via the iTunes sync process. If an Exchange account with Outlook on a Winblows PeeCee, this will not be possible.

How to stop syncing the photos only on facebook

how to stop syncing the photos only on facebook

corg2333 wrote:
yeaa but it is not only on facebook i think..
Disable the automatic spell checking service in your browser.
Safari
--> Edit --> spelling and grammar --> uncheck "check while typing"
Firefox
http://support.mozilla.com/de/questions/500215

How to stop a queue - urgent

Similar Messages

Maybe you are looking for