How to stop allocating partial ST quantities for deliveries

Hello SAP Gurus,
For some material we repeatedly get pick slip for partial quantities (UOM- ST (item)) even though we only sell by the full ST unit. This only happens on our bottles (UOM- bottle). When we have a pending "Process order" the quantity on the Process order is not a whole number, so the ATP is using the partial ST in the calculation for availability, even though manually we stock and ship released product in full ST units.
How do we get SAP to stop allocating partial ST quantities for deliveries?
I checked in conversion table, there the numerator is 1 and denominator is 15 for uom bottles .
Could some one please help me on this?  
thanks,
Sha

Shayan,
As per my understanding you are saying we can maintain u201Cdelivery unitu201D as 1 in material master u2013 sales organization-1 view
Not exactly. You should maintain the delivery unit as 1 ST .   You have told me that you have a business requirement whereby you only wish to have deliveries created in even multiples of '1 ST', and no fractional STs.  This is the place where you manage that requirement.  Even if you don't implement my other suggestion, you should probably do this, unless there is a compelling business reason not to.
You could choose to deliver in other UOMs, that is why I suggest that you enter the UOM in the terms of your business requirement (deliveries in even ST quantities).
didnu2019t understand your second suggestion.
  Your orders will deliver based on the quantity available to deliver.  The quantity available to deliver is determined by the ATP check you have configured for deliveries.
You mentioned that pending process orders with fractional quantities affect the quantities of the deliveries that are created.  Assuming that your base UOM is ST, then this implies that process orders are currently being considered in your ATP check for deliveries.  If the ATP sees a fractional quantity as 'available', it will attempt to create a delivery that includes the fractional quantity.
If you were to eliminate the process orders from the delivery ATP check, that will remove one cause for fractional delivery quantities.  If you configure the ATP to only consider 'stock' as a supply element, then deliveries will only be created against available stock.  If your business process is that you always send material into stock in even increments of ST, then your ATP check should also only calculate 'even increments of ST' as available to deliver.
ATP config for deliveries can be found in OVZ9.  Search for your ATP check and checking rule "B".  To eliminate process orders, in the place where it says "incl. production orders"  set it as 'blank - Do not take into acc."
Best Regards,
DB49

Similar Messages

  • How to stop the message "press 1 for ..."

    Hello, while I'm at it...does anyone know how to stop the instructions that get attached to my outgoing voicemail message?  You know, the one that says, press 1 for __, press 2 for __, press * to send a fax.....in my old phone (also with Verizon) it didn't have that message. 
    Thanks all!

    I took this problem to a genius.  He removed the SIM card and added a new "blank" card from AT&T.  Using this SIM we went to setting an turned cellular data off.  Then we put the Apple SIM back in the machine.  Now you can turn off the cellular so you will no longer get the messages.  To end this practice, sign up with a carrier.  Just click the button in the Settings... menu.

  • How to stop auto generation of ids for h:dataTable

    I am using <h:dataTable> tag to display more than one error messages.
    My code goes like this
    <h:dataTable id="messagetb" value="#{searchZug.searchZugParam.allMessages}" var="message">
    <h:column>
    <h:outputText style="color:red;" value="#{message}" />
    </h:column>
    </h:dataTable>
    When i run my application, console is displaying a message like
    'WARNING: Component _id79 just got an automatic id, because there was no id assigned yet. If this component was created dynamically (i.e. not by a JSP tag) you should assign it an explicit static id or assign it the id you get from the createUniqueId from the current UIViewRoot component right after creation!'
    I checked in the generated html source. It is generating id for tbody as 'messagetb:tbody_element', this is causing the problem.
    How can i stop this auto generation of ids? if not possible, then how can i explicitly specify the id for tbody?
    Thanks,
    Murthy

    Narasimha.Murthy.d wrote:
    I am using JSF version 1.3There exist no "JSF 1.3". When talking about "JSF" without mentioning the implementation name, we assume it as JSF specification. The JSF specification is only been available as 1.0, 1.1, 1.2 and 2.0. As said before, we´re more interested in the JSF implementation name. Is it Apache MyFaces? Is it Sun RI or Sun Mojarra? And then please tell the version from that.

  • How to stop the system to ask for a password

    How to make the system from asking for a password for every installation???

    You can't do that.  Apple is very careful to make sure that only an authorized person does installations.

  • PS migration: How to stop auto-creation of PR for completed activities?

    We are migrating project master & transactional data from R/3 4.7 to ECC5. In the old system, majority of the ext. activities in our projects already carries the status REL. Purchase Requisition was auto-created > PO done > GR/IR done > actual cost for the ext. activity already posted into the project.
    In our migration effort, we are transferring the whole project structure & master data from the old 4.7 to ECC5 and subsequently updating the system & user statuses of the whole project structure.
    How can we stop the system from auto-creating a PR again when the statuses are updated for those activities that are already completed, i.e. actual cost posted, as in 4.7 system?
    We thought of using the logic if a PO exist for the activity in the 'old' system, then the field AFVGD-AUDISP (Res/Pur.req) for the activity in CJ20N should be set to 'Never'. However, my ABAPer was saying this could not be done as AFVGD is a structure and not a table.
    Have any one of you face similar predicament? Is there other method to address this issue? Appreciate your assistance.
    Edited by: Quah Ai Ling on Jun 10, 2008 5:36 AM

    Hi Varshal,
    Thanks for the suggestion.
    However, we thought of an alternate method that does involve changing the customers existing business process.
    1) Change the field AUDISP in the network profile to 1 "Never" for the conversion.
    2) Migrate the data. Program will create Networks, Activities & Components with the field AUDISP set to "Never create Reservation or Purchase Requisition".
    3) Change the field in AUDISP in the network profile back to "2 From Release".
    We will have to get the users to clean-up their data (close outstanding PRs or convert those PRs to POs) before this exercise for a clean cut-over.

  • How to stop user from entering value for already existing data

    Hi ,
    We have a situation , where we need to give user a template for entering the data and then send it to the database. But we want that if user has already entered the value for a combination, then he should not be allowed to select the same combination again in that template.
    In other words , there should be write access but not update access.
    So I have two questions related to it:
    1. How to build report with giving user , the drop-down list of available members under each dimensions. (I know that we can provide list by writing all of them in excel and then using those values in drop-down)
    2. How to restrict the user for selecting the combination which has already been selected.
    Need your suggestion
    Thanks
    Sanjay

    Hi Sanjay,
    for your first question...
    you can build an EVDRE in a hidden area/sheet to display all values of a desired dimension in rows. Set Option SuppressDataCol to 'Y'. Also maintain MemberSet options to display only the values you need.
    Now you can reference your DD-box to the key- or description range.
    With some VBA-code you can refresh this EVDRE on Workbook_Open and also set the range (attribute ListFillRange?) of you DD-box dynamically to the RowKeyRange.
    Hope, it helps.
    Regards
    Steve

  • How to stop getting text messages intended for another family member?

    Hi,
    I occassionally get a text message intended for another member of my family, and vice versa. When that happens we both get the message, and the other person can then see the rest of the thread. I think the problem is that we share 1 AppleID. If that's the cause I'm not sure how to correct it because we are also sharing all our app, music, and video purchases made with that ID. We are also on the Sprint network, if that is relevant.

    On each device: Settings>Messages>Send/Receive...edit here & just make sure phone number is checked, or that only one person uses the Apple ID. Either that, or you each get separate Apple ID's for iMessage, FaceTime & iCloud. you can continue to use the same ID for iTunes content.

  • How to stop my phone from restarting for no reason after it being updated recently?

    Hello, I have had the Droid Razr Maxx HD for almost a year and everything has gone well until about 2 weeks ago I noticed that my phone keeps turning itself off and restarting every 2-3 days constantly all day. Not sure why its during this but also the screen keeps freezing and the apps either wont run properly during this time or they will react slowly... Does anyone possibly know either why this is happening or how to fix this or am I just out of luck and need to look into a different phone?

        Hi ds755!
    No need to look into getting a different phone.  I'm sure we can resolve this issue for you.  It appears there may be temporary files on your device memory that may be causing this device symptom.  We can remove those temporary files by wiping the cache partition http://vz.to/1x7Q87M.  This step will not affect your personal files and settings on your device.  Please try this and let me know how your device responds after wiping the cache partition.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • How to stop itunes making separate folders for every song

    Each time i open a new tune in itunes it keeps making a separate folder for them which i dont want, i just want all my tunes in itunes media/music folder as they are.
    I have unchecked to stop itunes organizing them but it still happens.
    Kind Regards
    Martyn

    an alternative approach would be to keep both options in the advanced preference tab checked and drag the content from its current location into an open iTunes window *while holding the option key*.
    iTunes will index the path to the original's location but not copy the file physically.
    avoids having to check the settings on the advanced tab every time.
    JGG

  • How to stop headphones from becoming 'Input' for sound

    Hi,
    I hope somebody here can help me with this problem.
    When I connect my headphones to my Macbook Pro via the jack, the Sound Settings automatically change so that the headphones are not only the Output but the Input too - so if I record something whilst the headphones are connected, rather than the Internal Microphone being the default recording device, the headphones record instead!
    The problem is that I'd much rather use the Internal Microphone as the Input when the headphones are connected as the Output. But for some reason there's no option in System Preferences to stop the headphones automatically becoming the Input and to use the Internal Mic for this instead. This seems bizarre to me, as my previous headphones were purely Output by default.
    Is there any way I can change this? Set the headphones as Output only, whilst using the Internal Microphone as Input?
    There must be some kind of Advanced Settings somewhere!
    I'd be very grateful for any suggestions!
    Cheers,
    Jay
    p.s. Below is a screenshot of my System Settings > Sound after I've plugged the headphones in. As you can see, Input has changed to 'headphones with in-built external mic" and there appears to be no way to change it!

    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • XMLEncoder - how to stop it from using NaN for int's

    I am trying to invoke a webservice. I used the Flex Builder 3
    service code generator. I have an object "Person" which has three
    fields: {id:int, firstName:String, lastName:String}
    I have a case where I invoke a method on a webservice that
    takes a person object. the person object in this case should only
    have a first and last name defined (no id, yet). I stepped through
    the flex source code to see what happens and basically when it
    encodes the Person object it gets to the "id" field whose value is
    NaN (b/c I never set it). The encoder eventually just decides that
    (NaN >= integer.min value) and passes it along so it gets into
    my SOAP message as <id>NaN</id>. This causes problems
    at the web service (java) side b/c it doesn't know how to
    unmarshall "NaN".
    So...any suggestions on how to prevent it from sending
    <id>NaN</id>. maybe even just <id /> would be
    ok.

    Moving the iOS device backup location
    Open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up, or with Start > Run on older Windows.
    To move the current backup folder from C: to D: (for example) type in this command and press <Enter>
    Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
    Where <User> is your Windows user name.
    To make iTunes look for the data in the new location type in this command and press <Enter>
    MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
    If your preferred drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
    If you have Windows XP then you'll need a third-party tool such as Junction to link the two locations together instead of the MkLink command. The source folder is C:\Documents and Settings\<User>\Application Data\Apple Computer\MobileSync\Backup
    I'm pretty sure the same technique will work with the iPod software download folder, although it is worth noting that it does not work inside the iTunes Media folder. At last time of testing if you attempt to redirect sections of the media folder and iTunes writes to a redirected location it will erase the link and replace it with a regular folder.
    tt2

  • How to stop Calendar app from asking for my icloud password every 5 minutes

    On Mac OS X 10.9.5
    Recently the Calendar app pops up a window every few minutes asking for my iCloud password. I am sure I am entering the correct password, and selecting Remember password in my keychain - but it doesn't help. I have tried switching off Calendars in my iCloud settings, waiting then switching it on again. I have restarted my computer (several times). Nothing seems to help. The problem started since setting up 2-step authentication for my iCloud account. Any help much appreciated - It is really annoying!

    I found this on the Flexibit website.
    Why does Fantastical ask for my iCloud password after enabling two-factor authentication for iCloud?
    Apple recently made a change and now requires app-specific passwords when using two-factor authentication with iCloud. Please read this on how to set it up: http://support.apple.com/kb/HT6186.
    If you've set up an app-specific password and Fantastical is still not accepting the new password, make sure that you aren't accidentally pasting in a return with the password. iCloud's website will include a return at the end of the password if you copy and paste the password directly from the iCloud website, which will cause the app-specific password to be rejected.

  • How to stop tumbler from generating thumbnailers for pdf file

    I'm using tumbler for thunar to generate thumbnailers, which works quite well. But I don't want it to generate pdf thumbnailers, since they are not in the same size. I've searched much, but not found any config file for tumbler. Any ideas? Thanks.

    Hi Aashi,
       So here is what I understood from you issue.
    1. You are creating a work item and sending a notification to the WI recipient about the task which is available in his inbox.
    2. Upon checking the mail the agent might open the WI which is in ready state and with taking any action on it he might close or click on back button.( So this action makes the work item status change from READY to INPROCESS state).
    After this I am not sure what is that making you to create another worktiem.
    what I would like to suggest is you can check the status of the work item from SWWWIHEAD table based on the work item ID.
    Next what I would suggest is to tweak you workflow design to include Deadline monitoring LATEST END. and it should be modeled. in this case what you can do is you can just set the previous work item to Obsolete and create a new work item.
    The other possibility  to fix your issue could be make use of the PORCESS control step after validating the state and of work item and set the work item to obsolete or logically deleted. so this makes the old work item cleared and the new work item appears in the users inbox.
    Regards,
    Pavan

  • How to stop the vocal from ipod for each action

    i hv a ipod touch and i hv activated the spoken vocal for each time i do something.
    i want to deactivate that. seems to me to be a struggle.
    rgds
    datwanichand

    See this article for instructions on turning over the VoiceOver setting for your iPod.
    http://support.apple.com/kb/HT3577
    B-rock

  • How to set-up change document object for deliveries??

    Hi experts ,
    kindly help me with this config , I did some researched and none of them have solve my problem.
    i need to know on how to set-up a change document object for delivery documents.
    Change document object LIEFERUNG is not available in transaction SWED.
    How will I add this change document object in SWED?

    hi ,
    im wondering why even the existing object VERKBELEG is not being triggered?
    would you know any reason for this?

Maybe you are looking for