How to STOP auto-resize in Keynote 6.1

I cannot find a way to stop the automatic "shrink to fit" of text in text boxes in keynote.
Does anyone know how and where this is controlled?
Any help would be appreciated!
Dee

Use custom text boxes, click the T button on the tool bar.
The Master slide text bounding boxes are designed to remain the same size, but as more text is added the text size is reduced to compensate.

Similar Messages

TS1424 I had purchased a VIP subscription in starmakerstudios karaoke for a week. I don't know how to stop auto renewal. Even though I have deleted the app I am still being charged

Hey people please help me with my problem.
I purchased a VIP subscription for a week in starmakerstudios karaoke. I don't know how to stop auto renewal. Even though I have deleted the app, I'm still being charged $1.99 a week!
Please help me out...

Hi Gerald,
Well, you're not alone. The question is why is this happening? Since the referenced link shows the same type of problem with Yahoo finance, I suspect there is a coding problem on the site, specific to how Firefox is reading the code. Not being a programmer, I can't offer specific advice other than contacting either Firefox through their Community forum, or Yahoo Finance.

Stop auto resize on mplayer? [solved]

Hi does anyone know how to stop mplayer from auto resizing when you load a video??
I have searched everywhere and i am suprised it's not an option in preferences
Cheers
Last edited by joco2 (2007-08-12 12:07:25)

I am pretty sure mplayer resizes itself in order to have one monitor pixel per one movie pixel in one dimension and the other dimension is calculated differently if the movie uses non square pixels (like DVDs).
About your problem, try reading -vf scale in mplayer man.

How to disable auto resizing for jComboBox

Hi,
I do not know how to prevent jComboBox to be auto resized according to its content. I put a jComboBox on JPanel with IDE.
After that I use for loop to fill a jComboBox. JComboBox width depends on the content and jComboBox is autoresized. I tried to use set*Size before and after for loop but it did not work as I wish:
        jComboBoxT.setMaximumSize(new java.awt.Dimension(10, 20));
        jComboBoxT.setMinimumSize(new java.awt.Dimension(10, 20));
        jComboBoxT.setPreferredSize(new java.awt.Dimension(10, 20));
        jComboBoxT.setSize(new java.awt.Dimension(10, 20));Could you help me please? The problem is that I have three jComboBox in one row and after autoresizing one disappears...
Best regards,
Primoz

Hi,
I have created SSCCE. I do not like that jComboBox spread over the whole display. I would like that the jComboBox width is only about 2 inches (5cm). If you run example below you will see that jComboBox width auto resize.
Regards,
Primoz
import java.awt.*;
import javax.swing.*;
public class PrimozComboBox extends JPanel {
    JLabel picture;
    public PrimozComboBox() {
        String[] petStrings = { "Bird", "Cat", "Dog", "Rabbit", "Pig" };
        String[] cityStrings = { "New York", "Ljubljana", "Chicago" };
        JComboBox petList = new JComboBox(petStrings);
        petList.addItem("This is very long pet name, which could spread over many lines");
        add(petList);
        JComboBox cityList = new JComboBox(cityStrings);
        cityList.addItem("This is very long city name, which could spread over many lines");
        add(cityList);
    private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame("ComboBoxDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        JComponent newContentPane = new PrimozComboBox();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

How to Stop Auto assignment of Source of Supply in SC

Hi All;
We are using SRM7 classic scenario.
While creating a SC, the system automatically assigns a vendor in the source of supply if there is 1 contract or 1 inforecord.If there are multiple, the system will not assign but it will show them all so that the user will select one of them.
Our requirement: we need to stop auto assignmnt of source of supply in SC.
Thanks

Hi,
There is a source determine driver and FM in SRM. You shall find it in the forum.
Here you can change the behaviour and deassign the contract that is automatically assigned
Rgds
Venkat

How to avoid auto resizing the JPanel

I have JFrame as main window. This JFrame consist of statusbar at the bottom of the JFrame. The statusbar has implemented as a panel that uses BorderLayout. This statusbar has two JPanels as children.
1) the first child panel(label panel) has 3 labels on it.
2) the second child panel(image panel) has only one label with a image and this second panel is added to statusbar to the next of the first child.
3) all panels use BorderLayout.
If I resize the JFrame by dragging its right border (right to left) both the panels on the statusbar are auto resizing. But I don't want to resize the image panel on the statusbar. I mean even if I resize the frame the size of the image panel should not change. It has to always visible completly.
Any help is heighly appreciated.
Regards
Venkat

There could be several different ways to achieve this, but it all boils down to using appropriate layouts and/or preferredSizes.
The Java™ Tutorials: [Laying Out Components Within a Container|http://java.sun.com/docs/books/tutorial/uiswing/layout/index.html]
db

How to stop auto approval of requests by xelsysadm ?

Hello OIM-SOA experts, when I submit role request using xelsysadm user, the operational level request is auto approved eventhough I have custom approval in place. But requests submitted by others will go for approval process. How to avoid auto approval of xelsysadm requests for opearational level ? Is it possible to configure this ?
appreciate your suggestion
Thanks

How did you create Approval Policy ?
Did you create Request Level and Operation Level Policies ?
Did you select proper Request Type ?
Did you create proper rule which satisfy your expected results ?

PS migration: How to stop auto-creation of PR for completed activities?

We are migrating project master & transactional data from R/3 4.7 to ECC5. In the old system, majority of the ext. activities in our projects already carries the status REL. Purchase Requisition was auto-created > PO done > GR/IR done > actual cost for the ext. activity already posted into the project.
In our migration effort, we are transferring the whole project structure & master data from the old 4.7 to ECC5 and subsequently updating the system & user statuses of the whole project structure.
How can we stop the system from auto-creating a PR again when the statuses are updated for those activities that are already completed, i.e. actual cost posted, as in 4.7 system?
We thought of using the logic if a PO exist for the activity in the 'old' system, then the field AFVGD-AUDISP (Res/Pur.req) for the activity in CJ20N should be set to 'Never'. However, my ABAPer was saying this could not be done as AFVGD is a structure and not a table.
Have any one of you face similar predicament? Is there other method to address this issue? Appreciate your assistance.
Edited by: Quah Ai Ling on Jun 10, 2008 5:36 AM

Hi Varshal,
Thanks for the suggestion.
However, we thought of an alternate method that does involve changing the customers existing business process.
1) Change the field AUDISP in the network profile to 1 "Never" for the conversion.
2) Migrate the data. Program will create Networks, Activities & Components with the field AUDISP set to "Never create Reservation or Purchase Requisition".
3) Change the field in AUDISP in the network profile back to "2 From Release".
We will have to get the users to clean-up their data (close outstanding PRs or convert those PRs to POs) before this exercise for a clean cut-over.

How to stop auto comnnecting to share as AppleID (permissions)

OK chaps and chapesses, I've had a search but the question I want to ask usually gets asked in reverse (how to connect as Apple ID).
This is the scenario.
1) I have 2 macs - a 2009 Mac Pro desktop and a 2011 MacBook Pro.
2) They are (at the moment) exact clones of one another, both running ML (10.8.5)
3) Both the MP and the MBP have an "admin" user (for admin only) and my main account for working (standard user).
4) The Macs are connected to my home network via AFP shares using static IP addresses, (let's say afp://192.168.1.20 and 21)
5) Both computers have different network share names (eg MyMBP and MyBigMac)
I am trying to network them so that I can connect to either Mac from the other one to copy files across from one standard user's account, to maintain sync.
Before anyone suggests iCloud, I cannot use this for my data storage as much of my data is subject to non-disclosure agreements and my clients' IT policies, which forbid cloud storage.
Anyway, I've got no problem getting the Macs to see each other on the network – the problem is, every time I connect, it immediately connects under my Apple ID. This means the sharepoint (my home folder) mounts without giving me the option to "Connect as… Registered user" which is what I need to do. If I am connected as my Apple ID, I do not get the necessary permissions to move stuff around in the home folder of the other Mac. I know I need to log in as the standard user in both Macs and connect as such. The problem is stopping it auto-connecting as Apple ID.
This problem happens whether I browse the network, or whether I Go>Connect to server.

This might also help: connect with cifs://
FROM:
http://osxdaily.com/2013/10/30/connect-smb-nas-network-shares-os-x-mavericks/
Connect to SMB & NAS Network Shares in OS X Mavericks
Oct 30, 2013
... a very easy workaround to connect to SMB and NAS shares from OS X:
From the OS X Finder, hit Command+K to summon “Go To Server” as usual.
In the “Server Address” field, use the cifs:// prefix as follows:
cifs://127.0.0.1
Connect to the SMB, NAS, or Windows share as usual.
... it’s because using CIFS connects with SMB1 rather than the (currently) buggy implementation of SMB2. ... Apple adjusted the default protocol for SMB (Samba, the Windows file sharing ability) from SMB1 to SMB2, and the SMB2 implementation apparently carries a bug which is incompatible with ...

How to stop auto generation of ids for h:dataTable

I am using <h:dataTable> tag to display more than one error messages.
My code goes like this
<h:dataTable id="messagetb" value="#{searchZug.searchZugParam.allMessages}" var="message">
<h:column>
<h:outputText style="color:red;" value="#{message}" />
</h:column>
</h:dataTable>
When i run my application, console is displaying a message like
'WARNING: Component _id79 just got an automatic id, because there was no id assigned yet. If this component was created dynamically (i.e. not by a JSP tag) you should assign it an explicit static id or assign it the id you get from the createUniqueId from the current UIViewRoot component right after creation!'
I checked in the generated html source. It is generating id for tbody as 'messagetb:tbody_element', this is causing the problem.
How can i stop this auto generation of ids? if not possible, then how can i explicitly specify the id for tbody?
Thanks,
Murthy

Narasimha.Murthy.d wrote:
I am using JSF version 1.3There exist no "JSF 1.3". When talking about "JSF" without mentioning the implementation name, we assume it as JSF specification. The JSF specification is only been available as 1.0, 1.1, 1.2 and 2.0. As said before, we´re more interested in the JSF implementation name. Is it Apache MyFaces? Is it Sun RI or Sun Mojarra? And then please tell the version from that.

How to stop auto rotate of shapes in Illustrator CS4?

When I create a shape, like a rectangle, it starts out slightly rotated or skewed. When I take another shape, like a half circle, and reflect it, it rotates at a slight angle. This happens every time I start a new file. I don't see rotation in the appearance panel. When I look at the transform panel it lists rotation at zero. Yet all of my shapes tilt down and to the right.
How can I stop my shapes from auto rotating?
Thank you,
Nina

Check if the constrain angle is set to 0
-> Preferences

Can some1 tell me how 2 stop auto flash fr.adobe plz

any help from any of u will b greatly appreciated as I need 2 know where 2 go on IE 2 stop anymore automatic downloads & trust me I'm desperate as I'm disabled & need my comp.& w/flash v.12 has screw up chrome 4 sure but know how 2 disable flash on it but need 2 stop any automatic downloads fr.adobe in IE so any help so appreciated..many blessings..Loretta

The Skyfire browser is the best solution I have found, so far. It's a browser that converts the videos on the fly. It doesn't work for other types of flash (games, ads, etc) but it does a good job with videos.
http://itunes.apple.com/us/app/skyfire-web-browser-for-ipad/id409153623?mt=8
I see your location is UK, I'm not sure if the app is available in the UK.

How to stop auto from-feed on a dot matrix printer for printing only a single line of data at a frequency of 30 seconds

Hello friends
In a particular application, it is required to print a single line of data on a dot matrix printer (continuous sheets) at a frequency of 30 seconds. That is printing is to be carried out line-by-line on the same form without a form feed.
We are facing a problem of a form feed after printing of each line. Kindly help me to solve this problem of auto form-feed. How to continuously print at a regular interval without from-feeding.
Shahid Baig

Is this printer connected to a network?
You may need to look at the printer manual to see if there is a setting for a form feed. I remember when we had a dot matrix printer on the network about 12 years ago, there would be a network timeout setting of something like 30 seconds. So if you didn't continue to send data, the network will end the print job and send the file to the printer which would auto form feed at the end. Many of our basic programs had to be rewritten because they would do an LPRINT periodically, if you took along time progressing through the inputs, you would easily hit the 30 second timeout. So all the programs had to be rewritten to save the data to be printed to a file, and only once you execute a print command, it would read the file back in and Lprint it (or a Print#1) to the LPT port.
Since the printer was on the network, and basic could only print to LPT's, we had to use a net command to capture the LPT1 port and direct it to the network queue.
I don't remember all the details, but those are the bits and pieces I do remember. I think the answer to your problem lies in there somewhere.
Namely:
1. Printer setting to auto form feed.
2. Network setting that closes print job after timeout period.

HT1977 how to stop auto downloads and taking money from my account

Please help,my itunes account started downloading apps and taking my money. What do i do to stop this

I have never heard of the app store automatically downloading apps if the user did not initiate the download by entering their password first. Sign out of your account and that should stop it.
If someone shares an Apple ID with you, then you might be seeing the downloads that they have purchased and that is why this happening - i f you have auto downloads turned on in Settings > Store > Automatic Downloads > Apps > On.
Does anyone share your Apple ID?

HT3702 How to stop auto renewal for magazine subscription?

I have subscribe to National Geogrophy and it has auto renewal which I like to terminate? How can I do that?

Look here for help.
iTunes Store: Purchasing and Managing auto-renewing subscriptions

How to STOP auto-resize in Keynote 6.1

Similar Messages

Maybe you are looking for