How to stop automatic connection to itune store when opening itunes?

when ever i try to open i tunes without internet connection,a warning diallog box appears saying that  'itunes cannot connect to itunes store.check internet connection'.ive tried disabling store,podcasts and everythng in itune preferences but still doesnt make any change..please help me out..please..:(

There is no issue here. If you have no Internet connection, it's impossible to access the store, therefore iTunes will alert you with this message so you don't get confused. You can use all the other offline features on iTunes, so you shouldn't be going through so much trouble to solve something which isn't a problem. There is no way to stop iTunes automatically attempting to access the store when you open iTunes, so you'll have to deal that message. If I'm not getting the issue, please tell me.

Similar Messages

  • How do I automatically connect to my ISP when I launch Firefox like Internet Explorer does (Firefox is set as my default browser)?

    When Microsoft Internet Explorer was my browser the dial-up connection screen to my internet service provider would come up automatically when I launched the browser.
    Now that I have made Mozilla Firefox my default browser this no longer happens. Launching Firefox results in an error message which says the website cannot be found. I then have to launch Internet Explorer, connect to my ISP, close Internet Explorer, then launch Firefox.
    This is a bit tedious. Can Firefox perform the same connect to ISP action automatically just like Internet Explorer does? If so, how do I activate this?
    Thanks
    Roland Piesik

    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    * http://www.mozilla.com/plugincheck/

  • HT3576 how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

    how do you stop the connect to itunes to use push notifications to stop poping up in my app it will not let me get into the app

    I have had this same issue but thankfully fixed it. Follow he steps below:
    Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
    Go to Settings > Reset > Erase All Content and Settings
    Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
    After everything has sync'd back to your phone everything should work fine.
    Hope this helps.

  • How can I tell how many devices are connected my itunes account via icloud?

    How can I tell how many devices are connected my itunes account via icloud?

    I only know what it says in the article.  There it specifically says "iOS device" and it says. "You can view which devices or computers are  currently associated," and, "Next to each device or computer name, you will be able to see when each was associated to your Apple ID."  However, this is all in the context of, "When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID."  I guess if somebody simply logs in it won't show.

  • How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks?

    How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks and i have the box checked under network settings?

    Random35,
    does your wi-fi router filter access by MAC address? If it does, then have you added your MacBook Pro’s MAC address to your router’s whitelist of acceptable MAC addresses?

  • When using Mavericks, how can I automatically replace 'i' with 'I' when typing?

    When using Mavericks, how can I automatically replace 'i' with 'I' when typing?
    It was easy to do prior to mavericks using system preferences (language and text), but now I can only submit a 2 letter word to replace, not a 1 letter word. I have tried using a space but it doesn't allow that. I would assume that most people would love to be able to type quickly without having to make uppercase I all the time (first world problem i know), so I can't understand why apple have removed this feature.

    There is the shift key, or text replacement approach, providing you have enabled two things:
    Edit > Substitution > √ Text Replacement
    System Preferences > Keyboard > TextClick + to add a replacement
    Replaceii[spacebar]
    With
    I[spacebar]
    Press return
    Quit System Preferences
    Now, when you type ii, you will see a pop-up offering I.
    In the OS X App Store, search for WordService. This free collection of Services will enable you to just type your content, select it, and then choose the Service item, “Initial Caps of Sentences.” It does what it says.

  • HT1918 how to change the country of the store when purchasing an app?

    how to change the country of the store when purchasing an app?

    Try contacting iTunes Support and ask them to remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • How to stop an app from auto starting when signing on?

    how to stop an app from auto starting when signing on?

    Several point :
    1st : do you select "auto relaunch" application when you close ML last time? don't do that next time
    2nd : in system preferences/Users and Groups look at applications that are selected for automatic opening. You can remove application. Tab called "Open At Login"
    3rd : have a look at /Library/LaunchDeamons/
    4th : buy Lingon
    Hope it can help

  • TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

    i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

    Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
    Make sure the Firewall is turned off.

  • Error message when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me below error message,

    Error message "Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit."
    when i try to connect to SharePoint Store, when i click on Sharepoint Store in the site its throwing me above error message,
    In the log it shows
    Request to office.com with the following URL:https://hostname/sites/appcatalog/config15 caused an exception. 
    System.Net.WebException: 
    Request to office.com should be routed with url URL:http://office.microsoft.com/client/15/commerce/query  but 
     request to office.com is sent with following URL:https://hostname/sites/appcatalog/config15
    and the Response from office.com was null or its HTTP status code was not 'OK'. Actual status code: 'InternalServerError'
    An exception was thrown while running task 'GetOfficeMarkets'. Microsoft.SharePoint.SPException: Sorry, we can't seem to connect to the SharePoint Store. Try again in a bit.  
    Feature "Apps that require accessible internet facing endpoints" activated in the Central Admin  .
    kindly help on this issue

    Hi,
    For a better troubleshooting, I suggest to do as follows:
    1. Check whether the App management shared service add to the Farm, and we need to configure the Subscriptions setting service also.
    2. SharePoint Server IP Address excluded from the Websense.
    3. Restart the server.
    4. Please check as the link below.
    http://www.naumanahmed.com/2012/07/sharepoint-2013-app-management-service.html
    More information:
    http://msdn.microsoft.com/en-us/library/fp179919.aspx
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How does system automatically picks up document type when you enter INV?

    1.How does system automatically picks up document type when you enter Invoice?
    2.What is Algorithms? Where is it used?
    3.What is the use of Customer Ledger Inquiry?

    The document type is hard coded by the system. Look at UDC table 00/DT for the document types in your system. Notice that some of those are marked as hard coded/reserved by JDE. You may wish to dowload the Accounts Receivable manual and read that to learn more about the document types.
    Not sure what you mean by algorithm, unless you are looking for how the system determines what document type to assign on invoice entry.
    These comments apply to accounts receivable and to JDE World, since you posted in the JDE World forum and are talking about the customer ledger inquiry. If you are in Enterprise One and asking about Accounts Payable, then this reply can be ignored (though Enterprise One works pretty similar to World in this respect).
    What is the use of the Customer Ledger Inquiry. To view accounts receivable detail history for a given customer, viewing on line. Whomever works in the accounts receivable department will likely use the Customer Ledger Inquiry quite a bit.
    Hope this helps a bit.
    John Dickey

  • How to save the credentials in windows security when opening a report?

    How to save the credentials in windows security when opening a report?
    in Silverlight program, user click a link to SQL server report services link, it pops up a new IE window and ask for windows security.
    Type the user name password in and check save password. reports showed and close IE. user click again, the same windows security popup dialog showed up. how to really remember the credentials?
    If keep the IE open, reports shows in second tab of the same IE window for the second click, and it didn't ask for the windows security.

    Hi Lascorpion,
    According to your description, users need to type username and password before they can open the SSRS report when reopening IE, right? If I have anything misunderstood, please point it out.
    Base on my research, this issue offten occurs on IE9 which ships with Windows 7 operating systems. In this case, to avoid this issue we can add the report URL to the trust site, for the detail information, please refer to the link below.
    SSRS Prompt for username and password in IE
    Regards,
    Charlie Liao
    TechNet Community Support

  • How get around "Cannot connect with iTunes Store" when updating apps?

    I have several Apps with updates indicated. When I select App Store, it goes to the updates but when I try to update, I get "Cannot connect with iTunes Store." But otherwise I can get to the iTunes Store itself. Where does "Report problem" appear? Not on my Touch (which is updated).

    Try it from the computer that you sync with, then sync the updated apps over to the iPod.

  • How to stop Access Connections from automatically connecting to WAP at turn on or restart?

    I had a problem with my X200 winxp sp3 wireless connection. I got it working OK again but in the process I did something that changed the action of Access Connections when I turn on or restart the machine where it automatically connects to the WAP whereas before it did not do this, rather it required a manual connection. For the life of me I can't find the setting that controls this behavior...can anyone point me in the right direction.
    thanks for any feedback
    *Smith & Wesson...the original point and click interface*

    Might not answer completely, but what is your "profile" set to? I have a "profile" called Office that wll only use the "hardwire" LAN Connection. I have another "profile" called Mobile that will only use the Intel Wireless card, yet another that is "HSPA Modem" that will only use the AT&T wireless card.
    Could it be that your "profile" is set to use just your Wireless Connection?
    Just a thought -
    Message Edited by mickey53usa on 01-09-2009 02:01 PM

  • Stop Automatic Connecting to RoboSource Control 3.1

    I entered server url to connect to Robohelp Server using RoboSource Control 3. I also mark that it should connect to this server every time the project is started. It is the wrong URL and it does not error out or abend. I am unable to go in and unmark the automatic connect because the first thing it does it try to connect. How or where can I stop it from trying to connect to this url address?
    System Attributes
        Robohelp HTML v8.02
        RoboSource Control 3.1
        Robohelp Server V8.0
        Webhelp Pro 5.50 (7.00.145)

    Hi,
    I use the following method for TFS when I want to temporarily disconnect a project from source control. I assume it will work the same with RoboSource Control.
    Make a backup of the project.
    Delete the CPD.
    Open the XPJ with Notepad.
    In the tags <miscproperties>, remove all the child tags (<matchedpair>).
    Save.
    Open Project with RoboHelp.
    The projet is now disconnected. By not removing it from RH, you can disconnect a project while the files in source control are retained.
    Greet,
    Willam

Maybe you are looking for