How to stop background isync-processes after migrating to Lion 10.7.4?
Hey.
Ever since I migrated (using Migration assistent and a LAN-connection) my data and prefs from my old MB (Leopard) to my new MBP (Lion) I get an error message saying that there was an error while trying to connect to a certain server. I believe the server the MBP wants to be connected to is the IP from my old MB that I used to migrate the data.
(It says: "There has been an error while connecting to the server '169.254.9.91'. – The server might not exist or ist not availible at this time. Check the server name or the IP-adress as well as the network connection and try it again.")
Usually the error just appears out of nowhere, however it can be reproduced e.g. when I connect my iPhone to the MBP.
As far as I can see, the console shows that iSync (which I know is no longer used in Lion) wants to establish that connection. In this case it's the AppleMobileDeviceHelper, but also iCalExternalSync or DashboardClient turn up in the console.
19.09.12 12:31:36,008 AppleMobileDeviceHelper: [0x1002180a0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
19.09.12 12:31:36,008 [0x0-0xd80d8].com.apple.iTunes: 2012-09-19 12:31:36.007 AppleMobileDeviceHelper[1203:503] [0x1002180a0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
19.09.12 12:32:06,162 AppleMobileDeviceHelper: [0x1002180a0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
19.09.12 12:32:06,162 [0x0-0xd80d8].com.apple.iTunes: 2012-09-19 12:32:06.161 AppleMobileDeviceHelper[1203:503] [0x1002180a0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
19.09.12 12:32:36,316 AppleMobileDeviceHelper: [0x1002180a0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
19.09.12 12:32:36,316 [0x0-0xd80d8].com.apple.iTunes: 2012-09-19 12:32:36.315 AppleMobileDeviceHelper[1203:503] [0x1002180a0] |Server|Warning| failed to connect to the server: NSPortTimeoutException connection timeout: did not receive reply
When I click "OK", I get this:
19.09.12 12:32:43,026 SyncServer: [0x101216f20] |DataManager|Warning| Client com.apple.isyncDU.ipod.A27001A9010C9 image file path /Volumes/Festgeplattet/System/Library/PrivateFrameworks/iPodSync.framework/Versions/A/Resources/ipod_4g.tiff does not exist.
19.09.12 12:32:43,026 SyncServer: [0x101216f20] |DataManager|Warning| Client com.apple.iSyncDU.356901038821921 image file path /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/PlugIns/PhoneModelsSync.phoneplugin/Contents/Resources/NOK6300.tiff does not exist.
19.09.12 12:32:43,027 SyncServer: [0x101216f20] |DataManager|Warning| Client com.apple.iSyncDU.356901038821921 sync alert tool path /Applications/iSync.app/Contents/MacOS/sync-tool does not exist.
19.09.12 12:32:43,027 SyncServer: [0x101216f20] |DataManager|Warning| Client com.apple.iSyncDU.356901038821921 formatter bundle path /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/Resources/Formatter.bundle does not exist.
How can I stop this error that seems to slow down the whole system?
What I did so far:
I already reinstalled Lion and used TimeMachine to get my data back but the error still appears.
I also deleted all files having iSync in their name and deleted the list of the "recent servers".
I reconnected my old MB with my new MBP once again using the old IP and disconnected properly.
If you need to know anything else, just ask.
(For all those of you capable of speaking German can read more here: http://www.apfeltalk.de/forum/showthread.php?t=410563)
Thanks in advance!
It seems that this should find a place somewhere on the Knowledge Base or a more visible location on ni.com...
Similar Messages
-
How to stop the boot process after the GRUB menu?
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.zuargo wrote:
Hello there.
I am getting an error message in the boot process, after the GRUB menu, but I can't read completely the message because it is shown too fast. So, how can I stop the process when I see the error message, for writing down it?
Thanks in advance.
I didn't try this before, but if you use systemd, you may want to try systemd.confirm_spawn to invoke interactive booting process, so you can start the services one by one manually therefore locate the one throwing out error message.
It is explained in the systemd manual:
http://www.freedesktop.org/software/sys … stemd.html -
How to stop the running process chain
How to stop the running process chains or infopackges...just qm status change is enought?
BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job -
How to stop the spinning ball after trying to install 10.7.3?How
How to stop the spinning ball after trying to install V10.7.3?
Boot from your recovery partition by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
When the Recovery desktop appears, reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin. -
How to stop the backup process....
How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...
-
How to stop a while loop after certain time using Elapsed time vi
how to stop a while loop after certain time using Elapsed time vi.
Hi Frankie,
Just place the Elapsed Time VI inside the WHILE loop, and wire the 'Time Has Elapsed' output to the conditional terminal in the lower right corner (which should be set to 'stop if true' by default).
In the future, please post your LabVIEW questions to the LabVIEW Forum. You have a much better chance of getting your questions answered sooner, and those answers can then help others who are searching the LabVIEW forums. Thanks!
Justin M
National Instruments -
question: How do I open CS5.5 after migrating to new laptop w/ Mac OS 10.8.4? I received a dialogue box stating I needed to run Java SE runtime (or something to that effect), when I ok'd it, and try to open cs5.5 Indesign, the program quits on startup. If I uninstall program & reinstall, will my documents be unscathed, or are they toast? Help!
Hi Art Bunny Rabbit,
Migration from one machine to other causes problem most of the time. So I recommend you to reinstall the software. Done worry none of your documents will be effected.
Regards,
Romit Sinha -
When connecting Apple devices to your iPhones wireless hotspot do those devices stop background data processes to conserve data?
In other words if you have a limited data plan on your iPhone will your other Apple devices such as an iPad automatically cease background data transfers to conserve data usage?Nice trick to connect your Apple Devices to your wireless network.
Will help the users if they are facing the problem with the apple devices. -
I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason??
Need I to install a native Lion OS to solve the problem?
Regards,
José A. PereiraHi, Processor 2.66 Ghz Intel core i7, memory 8Gb 1067 Mhz DDR3.
on shut down a White screen occur with a star flashing during more or less 25 seconds. before update to Lion, 3 or 4 seconds to shutdown. no more app installed or removed. it stills the same usage.
I will be greatful if you can help me.
Regards,
José A. Pereira -
I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason??
Need I to install a native Lion OS to solve the problem?
Regards,
José A. PereiraHi, Processor 2.66 Ghz Intel core i7, memory 8Gb 1067 Mhz DDR3.
on shut down a White screen occur with a star flashing during more or less 25 seconds. before update to Lion, 3 or 4 seconds to shutdown. no more app installed or removed. it stills the same usage.
I will be greatful if you can help me.
Regards,
José A. Pereira -
Any idea how to get Yahoo to load after installing Mountain Lion??
http://www.koingosw.com/support/wiki/index.php/General_FAQ#Uninstalling_and_Pref erence_File_Locations
-
PFRD 11.1.1.4 - How to stop the In-process Reports Server
I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:
<!--security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/-->
in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
PauloThanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo -
How to stop running Backup process by BRTOOLS ?
Dear All,
We r using HP-UX -- OS for SAP system. We run backup process by DB13 TC.
once the backup started, we can not log in till backup process ends.
If we want to stop this process in between then how to stop BACKUP process safely ? We have to use BRTOOLS ?
Pl' give right method ..............Hi,
Just confirm whether you are doing a disk to disk backup or disk to tape backup.
Disk to Disk - It copies the files from oraarch filesystem to logbackup, and sapdata1,2,3... to sapbackup filesystems respectively. This is scheduled through brtools (DB13). This affects the performance tremdrously.
Disk to Tape - This takes all the files from sapbackup and logbackup filesystems to tape. this doesnot affect the performance.
We can kill the backup scheduled by brtools,because there is always a background job is triggered for the backup, the jobs always start with DBA*. Then kill that job, with help of pid from SAP level or OS level. but I doubt that the stopped backup can be used for recovery for future use.
With regards
Sudha -
Firefox crashes quite often, especially when I have multi tabs open. I usually have to use CTRL ALT DEL and end the process as Firefox stops responding.
My problem is not the crashing........it is the re-opening of the multiple tabs I had open, when normally it is one of them (not the home page) that caused the crash in the first place, so I cannot re-open firefox until I restart the pc, because every time I do it is the same story. Firefox tries to re-open all of the tabs and stops responding. I have looked in options but nowhere does it allow me to stop multiple tabs opening after a crash. If this continues, I will have to uninstall Firefox and stick to Chrome.Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
*http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default or changed via the right-click context menu. -
How to stop and start process SAPOSCOL
Hi, i have a problem with write access for saposcol program. I see that the file saposcol is read the file but its unable to wirte the same.
Collector : running
Start time coll. : Mon May 21 17:49:49 2007
Current Time : Mon Jun 11 13:27:51 2007
Last write access : Tue May 29 06:23:46 2007
Last Read Access : Mon Jun 11 13:26:24 2007
When i try to stop the saposcol i get the following error:
igzadm> saposcol -k
Setting Stop Flag :
13:24:44 11.06.2007 LOG: ==== Stop Flag was set by saposcol (kill_collector()).
13:24:44 11.06.2007 LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
Please kill collecting process.exes.
Am doing this command through SID<ADM> from change directory /run.
Please help me how to check the permission of the SIDADM to stop the services.
I also try the same from root user but now use..
Please guide me how to stop and start the SAPOSCOL in AIX 5.3.
Advance Thanks.
Suri TysonHi, i have the following permission for saposcol
imserv:/ # ps -ef | grep saposcol | more
root 118842 528422 0 14:02:17 pts/2 0:00 grep saposcol
I have changed the ownership as you mentioned....
imserv:/usr/sap/IGZ/SYS/exe/run # ./saproot.sh igz
Preparing /usr/sap/IGZ/SYS/exe/run/brbackup ...
Preparing /usr/sap/IGZ/SYS/exe/run/brarchive ...
Preparing /usr/sap/IGZ/SYS/exe/run/brconnect ...
Preparing /usr/sap/IGZ/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done
However, i still get the error as:
igzadm> saposcol -k
Setting Stop Flag :
14:12:13 11.06.2007 LOG: ==== Stop Flag was set by saposcol (kill_collector()).
14:12:13 11.06.2007 LOG: ==== The collection process will stop as soon as possible
can't kill process 409656.
kill: No such process
ERROR:No reaction from collecting process 409656.
Please kill collecting process.
Now the permission are set in my system as:
igzadm> ps -ef |grep saposcol|more
igzadm 729196 983058 0 14:13:25 pts/2 0:00 grep saposcol
Maybe you are looking for
-
I have removed all spyware, anti virus software and removed all iTunes programs - as suggested by Apple. I still cannot open iTunes on my PC because of the message "you do not have permission to open this file, folder" I have changed and checked all
-
We deploy Adobe 9 Standard through Altiris. The problem is that the option to run updates is not present on the Help menu, even when being run with an administrator login (we are Windows XP). I have looked through Program Files\Common Files and in
-
ABAP Help .. What does those brackets means
hi, I am learning sap abap and trying to use f1 on certain key words, I am unable to understand even simple statements because of lot of brackets. What those brackets means ?? Please let me know. may be this is silly, I am sorry about my ignorance. R
-
I am looking for a way to make the background on my desktop my iCal. At this point I'm printing as a pdf to iPhoto and changing the photo. Is there any way to make iCal my desktop background without having to print every change? Thanks for the help.
-
CF 8.0.1 RDS 500 Error
/CFIDE/main/ide.cfm returns a 500 status "The specified module could not be found.". This server was recently upgraded from Coldfusion MX 6 and hasn't worked since. CFIDE is set up as a virtual directory and pointed over to D:\inetpub\wwwroot\CFIDE.