How to stop Call Center Agents from Moving Headsets around

We are call center with about 200 agents at a time in the building. We go thru headsets like they are candy. But we just got told to no longer use cheap headsets. So we are slowly cycling in the new headsets. So any Ideas on how to keep headsets from moving stations. Our agents destroy headsets anyway, so I don't know how well these new ones are gonna last. They also move keyboards, mice as well. They have very little respect for the equipment and think breaking them is going to give them a new one faster. Let me know what you guys think.
This topic first appeared in the Spiceworks Community

I think you are seeing what is called the Ken Burns Effect. You can change this setting using the Rotate, Crop, Ken Burns Tool on the middle toolbar. You can select Fit, Crop, or Ken Burns. Fit will make your photo fit by letterboxing. Crop will make your photo fit by cropping the top and bottom off. Ken Burns allows you to Pan around. You can set the starting and ending rectangles for the pan.
Also, if you go to File/Project Properties you can set the default action for "Initial Photo Placement" to Fint, Crop, or Ken Burns.

Similar Messages

How to stop the Selection Tool from selecting effects around objects?

This question is for Illustrator CS5.
I can't seem to figure out how to fix this problem. I vaguely recall finding a solution in CS4, but cannot recall how it was achieved:
Scenario: If I have a number of shapes on top of each other, with, for example, a drop shadow on the top shape, whenever I try and select the shape below it (it is peeking out from beneath the top shape, so I click on this 'peeking' section of the shape to try and select it) I cannot - it just selects the top shape as the top shape's drop shadow is 'blocking' the shape below it. Make sense?
How do I go about about remedying this? I seem to recall being able to tell Illustrator to ignore 'effects' when making selections in CS4, but cannot work out how to do this in CS5. And is there a way to refine the 'sensitivity' or selection radius when clicking to make selections?
Hopefully someone with the knowledge can please advise?
Many thanks.

Never heard of ignore effscts for this.
Couple way to solve this
CMD Click on the already selected top element, to select the element underneath.
You may have used the visiblilty eyeball in the appearance pallette to temporarily hide the drop shadow
You can use CMD 3 to hide selected top elements, make the change you need, then Opt CMD 3 to unhide
For #1 to work, don't click too fast, or else your clicks will register as a double click rather than a 2nd clikc (depending on what you have set in you Keyboard preferences).
I mention #3 cause this is a very useful tool for cleaning up and grouping complex documents, when you want to select multiple elements.

Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.

Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

How to stop safari on ios7 from remembering history?

How to stop safari on ios7 from remembering history?
I hate to continually delete my history. Is there a way to stop it or set it to delete it on its own every day?

Hey Bigchins!
I have an article here that can address your question for you. The feature you are looking for is called private browsing, and it is explained here:
To enable or disable Private Browsing, turn Private Browsing on or off.
Private Browsing in iOS 5 protects private information and blocks some websites from tracking your behavior. Safari doesn't remember the pages you visit, your search history, or your AutoFill information.
Note: While Private Browsing is enabled, the Safari bars appear black or dark instead of blue or gray.
iOS: Safari web settings
http://support.apple.com/kb/HT1677
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How can I call a function from a procedure

I have a function named: f_calc_value which return the variable v_result. This function is part of a package.
How can I call this function from a new procedure I am creating?
Thanks

or refer this theread....calling function from procedure

How can I call a RFC from dynpage ?

Hi!
I would like to know how can I call a RFC from a Portal aplication, dynpage or jspdynpage. there include some libraries ?
any idea?
thanks

for deploying SAP Jra :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4#search=%22how%20to%20use%20jca%20sapjra%20site%3Asap.com%22
For lookup of SAP Jra use:
com.sapportals.connector.connection.IConnectionFactory connectionFactory =(IConnectionFactory) initctx.lookup( "deployedAdapters/SAPFactory/shareable/SAPFactory");
Using SAP Jra
http://help.sap.com/saphelp_nw04s/helpdata/en/47/13044258bdd417e10000000a1550b0/content.htm
The important jars required are:
connector.jar
Genericconnector.jar
prtjndisupport.jar
Thanks

How can i call a zreport from my bsp page.

Hi friends,
How can i call a zreport from my bsp page.
Moosa

Hi Friend,
These are the codings to be wirtten in BSP for transferring values to the REPORT
DATA:wf_date TYPE ztable-ID.
      data:seltab type standard table of rsparams,
       wa_seltab like line of seltab,
     event TYPE REF TO if_htmlb_data.
DATA:p_value TYPE REF TO CL_HTMLB_INPUTFIELD.
event = cl_htmlb_manager=>get_event( runtime->server->request ).
p_requ ?= CL_HTMLB_MANAGER=>GET_DATA(
                                        request = runtime->server->request
                                        name     = 'inputField'
                                        id       = 'i1'
if p_requ is not initial.
wf_date = p_requ->value.
endif.
clear wa_seltab.
if wf_date is not initial.
wa_seltab-selname = 'P_REQU'.
wa_seltab-kind = 'P'.
wa_seltab-option = 'EQ'.
wa_seltab-low = wf_date.
append wa_seltab to seltab.
endif.
submit *ZSAMPLEAP1* with selection-table seltab AND RETURN .(ZSAMPLEAP1 refers to the report name and AND RETURN for coming back to the BSP page after the completion of its operation in Report )
IMPORT int_name TO int_name FROM MEMORY ID '*zid*'.(For importing the obtained value from Report)
In Report
REPORT ZSAMPLEAP1.
SELECT-OPTIONS: p_requ FOR ztable-id NO INTERVALS.
SELECT SINGLE name from ztable into int_name WHERE id = p_requ-low.
WRITE:int_name.
    EXPORT int_name TO MEMORY ID 'zsharmila'.
With Regards,
SHARMILA BRINDHA.M

How to stop the tab bar from automatically hiding itself?

ive only found how to stop the address bar from disappearing and everyone with the tab problem seems to have posted this over a week ago and still hasnt been fixed yet if noone has a fix im out and done with firefox they can suck a fat one
why add this feature! i can understand the address bar but not the tabs all you have to do to hide it was push the tab button again and its gone was that so fucking hard that you had ruin a perfectly fine browser

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and facilitate future improvements to Firefox, the option to hide the tab bar was removed.
Fortunately, this can easily be resolved if you desire the keep tabs hidden. You can install "[https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/ Hide tab bar with one tab]", an extension hosted on Mozilla's add-ons site, which will restore the ability to hide the tab bar.
Thank you and I hope this helps!

How to stop the option key from changing tools when trying to subtract from a selection?

How to stop the option key from changing my tools when I am trying to subtract from a selection?
I'm running CS3 on Mac OS Leopard, and the automatic tool switching slows me down, but even preferences doesn't show a way to turn this off.
Thanks for your help.

With any marquee tool, JUST holding down the option key should not switch tools. You need to explain the problem much more carefully, It's completely impossible to tell from your description whats going wrong.
automatic tool switching
The only preference related to this, is to do with the SHIFT KEY - "use Shift key for tool switch".

How to stop the gray wheel from spinning after logging out

how to stop the gray wheel from spinning after logging out?

Frank ...
Make sure to quit all open applications before logging out.
Your proflie indicates your Mac has v10.7.1 installed.
If that is the case, updating your system software will help as far as functionaly as well as security.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac.
message edited by: cs

How to delete a management agent from grid control completely?

I have installed oem grid control 10.2.0.4.0 on single host(oemlinux.oracle.com), and I removed agent10g, and reinstall a new management agent into a new location, but when I wanted to add a weblogic server to monitor, I got error as below:
More than one Enterprise Manager Agent was found for the host.oemlinux.oracle.com
I found there were 2 agents in em console, how to delete the old agent from em console,anybody can help me?

Click on the All targets tab, delete the agent.
Then confirm that the delete is in fact happening.
Click Setup, Management & Services Repository tab.
Deleted Targets link.
Time Deleted Completed must have a date in there...
If all that fails - do a quick search - I posted the sql you can run against the repository to wipe it clean of an agent :-)
Not too that if you are removing the O/S software - you need to use the runinstaller to remove the Oracle Home from the inventory.
If you don't do this - future auto installs using the agentDownload script of the agent will fail.
.Daryl

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

I created an album from photos taken off three different cameras. I am sorting the photos manually and when I close iPhoto, the photos move back either by date or by camera import time. How can I keep the photos from moving around?

Don't tell us, tell them
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback

Call Center Agent's Need to See Sent Mails in Their Inbox

Hi Gurus
I am looking for a way to allow the sent mails to be seen and viewed in the Call center agents inbox on the Web UI.
We are using EHP1 is the above mention possible for us?
Many Thanks in Advance
Vikas

What about sending them to himself as BCC automatically? That would be a small change.
Best regards,
Thomas Wagner

How do I call a function from an Itemrenderer?

Hi, Im new in flex and I wonder if I can call a function from within an AdvancedDataGridRendererProvider
for example:
<mx:AdvancedDataGrid>
    <mx:columns>
        <mx:AdvancedDataGridColumn dataField="id" />
    </mx:columns>
    <mx:rendererProviders>
        <mx:AdvancedDataGridRendererProvider
            dataField="detail"
            renderer="components.myRendererProvider"
            columnIndex="2"
            depth="2"
            />
    </mx:rendererProviders>
</mx:AdvancedDataGrid>
<mx:Script>
     <![CDATA[
        public function outerFunction(){
    ]]>
</mx:Script>
myRendererProvider
<?xml version="1.0" encoding="utf-8"?>
<mx:HBox xmlns:mx="http://www.adobe.com/2006/mxml" paddingLeft="10" paddingRight="2" horizontalGap="2" paddingTop="0">
<mx:Script>
    <![CDATA[
     public function callOuterFunction( ){
          how do I call the outerFunction() from here?
    ]]>
</mx:Script>
    <mx:LinkButton fontSize="13" fontWeight="bold" click="callOuterFunction( )" label="label" />
</mx:HBox>
thank you in advance.

There are two ways to call a function from within an ItemRenderer. One way is to dispatch an event from your ItemRenderer and listen for the event in your main application. This approach has the advantage of creating loosely coupled code which is eaiser to maintain and extend if needed, but it takes a bit more work to set things up than using the second aproach lised below. You could also create a custom event to have greater control over what data is sent with the event.
private function callOuter():void {
     this.dispatchEvent(new MouseEvent());
The other approach is to call the main application by using parentDocument.
private function callOuter():void {
     parentDocument.handleItemRenderer();
Chris

How can we call a report from a form.

how can we call a report from an existing form.

Have you searched the Forms help system? It shows you how to use RUN_REPORT_OBJECT

How to stop Call Center Agents from Moving Headsets around

Similar Messages

Maybe you are looking for