How to stop document posting when filling setup tables for logistic app.
Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ
Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan
Similar Messages
-
How to Fill Setup tables for MAP (IS- Retail)
Hello,
I am working on MAP scenario, I found the following data sources as a part of it. Can anybody please tell me how to fill the setup tables for these and what are the base tables for it??
2LIS_40_REVAL
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208
Your reply is highly appreciated.
Regards,
NareshHi Naresh,
We cannot fill setup tables for each data source.
ORISBW -- This is the t-code to fill the setup tables for all the data sources which are related to application component 40.
If you want setup tables names of your data sources please check below.
2LIS_40_REVAL --- MC40RP0REVSETUP.
Comes to your second post.
2LIS_40_S202
2LIS_40_S207
2LIS_40_S208 these are LIS data sources, whic are replaced with LO data sources in SAP BI 7.0
If you are using LO data sources then no need to use LIS data sources.
Regards,
Venkatesh -
How to fill setup table for Application 18 Customer services
Hi,
How can I fill setup table for application 18.
Regards,
STHi,
To fill LIS, first set your LIS to update. use the central Tcode OMO1(for SD), OMO2(for MM) or OMO3(for other logistics) or you can set it in MC24 also(activate button).
SBIW -> settings for application specific datasources -> Logistics -> managing transfer information structures ->.... -> statistical setup Sales. (Application component 17 >transaction OLIIBW,Application component 18> OLISBW )-->select the relevent one whether sales/billings/deliveries etc in the pop-up. enter your LIS, give a name to job and execute.
Also pls chk this;
Re: query on setup table filling
Regards
CSM Reddy -
Error while filling setup tables for 2lis_13_vahdr
Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
NithyaHello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran -
Error while filling setup table for Sales
Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SGHi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ -
Tcode to fill setup tables for application 0CS( Customer Service)
Dear Experts,
i have to fill the setup tables for the datasource 2LIS_18_I0TASK.
the datasource comes under the appilcation 0CS( Customer Service).
when i am trying to fill the setup tables through the tcode SBIW i am not able to find the respective appilcation.
Could you please let me know the transaction to fulfill the same.
Regards,
Sunil...Hi SunilKumar Bolle,
For filling setup tables for 0CS Data Sources Use the T-Code- OLISBW, or use the path SBIW->Settings for Application-Specific DataSources (PI)->Logistics->Managing Extract Structures->Initialization->Filling in the Setup Table->Application-Specific Setup of Statistical Data->Service Management - Perform Setup
The only way to say thanks in SDN is to assign Points. -
Trying to fill setup table for 2LIS_04_P_ARBPL
Hi
I am trying to delete and fill setup tables for 2LIS_04_P_ARBPL. I go to SBIW, delete setup tables for application component 04 and then go back to fill setup tables. But I get the message "DataSource 2LIS_04_P_ARBPL contains data still to be transferred".
Am I missing a step?
Thanks
PoojaI went to transaction SBIW ->Settings for Application specific datasources ->Logistics->Initialization->Delete contents of setup tables-> Application 04
Then under Initialization I went to Filling in the Setup table->Application specific setup of statistical table ->Production.
I entered the date & time (and entered my own Run name. Should I say new run or rerun or give my own Run name?) and executed the transaction.
Then I got the message - datasource still contains data to be transferred.
Thanks! -
Filling setup tables for 2lis_03_um
hi
i am trying to fill setup tables for um. its nott allowing me, i gave name of run and date and time .
its asking Archiving Run . i am trying to give or f4 its not allowing me?
please let me knowHi Suneel........
Check this thread by Roberto Negro......
Archive run.
Hope this helps.....
Regards,
Debjani..... -
Strange error while filling setup tables for purchasing
hi experts,
while filling setup tables, job is getting cancelled. when I check in sm37 message is
Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
Job cancelled after system exception ERROR_MESSAGE
It is for only the 8th month of 2009. If I run for other dates it is succesfull.
I am not able to understand what it mean.
Pls guide me how to resolve this.
regards,
rajesh.hi
according to sven check this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
EUR Conversion to USD
may help you. -
Error when running setup table for 2LIS_03_UM
Hi experts,
When running the setup table for 2LIS_03_UM, we got the error message "Plant FP01 does not exist." Any suggestions on how we can fix this?
Thanks,
Donnacheck if this plant has been maintained in source system or not. If not, ask the concerned team to maintain it.
Another way may be to allow error records which should ignore errornous records and rest should be filled in setup table.
Regards,
Gaurav -
Error while filling setup table for 2LIS_03_BF
Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya -
Block document when filling setup table
hi experts :
I have a question about blocking document ,do we have to block the document when filling the setup table and when doing initial extracion both ? or just filling the setup table?this confuess me .
in experiance ,how long will it take to fill the setup table if the total records reaches about 5 million .
thank you in advance
cindyHi,
It is recommended to fill the setup table after logging off all the transaction users, preferably during nights (basically you will have to take a down time of the R/3 system). if you have taken a down time then it is not necessary to block documents, since there would be no users posting transactions.
The blocking would be useful if you are trying to fill the setup table during the day time and there is possibility that users could post some documents. However by blocking documents, this would prevent the users from posting / creating documents and this could hamper the normal business (like creating billing documents, orders etc).
if you are doing the filling up at night after taking down time then the approx time could be 1 hour(my guess) again this could depend on the application servers, RAM etc. However if you are trying to do it during the peak hours, i.e when the users are doing transaction(which is not recommended), then it is very difficult to estimate the time.
Assign points if useful.
Regards
Venkata Devaraj -
Error when filling setup table
Hi!
I'm trying to fill the set-up table in R3 for SD Billing Documents.
SBIW (Display IMG (Settings for App Specific Datasources --> Logistics --> Managing Extract Structures --> Initialization --> Filling in the Setup Table --> App. specific setup of statistical data)..
When running the program i get this error msg:
"More faulty documents found than the tolerated 0000000000"
The result is that the program stops. Some of the data is coming into the set up tables, but this seems to be inconsistent.
Anybody know what I could do?
BR
BjørnThanks a lot..
How can I find the log of dumped jobs?
BR
BJørn -
How to fill setup table for the Extractor: 2LIS_02_CGR
Hi,
Tthere is no data for the 2LIS_02_CGR extractor in RSA3 T-Code, I would like to load the data and as per my understanding i need to fill the step table.
Could any one provide me the step-by-step to fill the setup table.
Regards,
Prem
Edited by: pannalde on Dec 2, 2010 6:03 AMHi Prem:
For more details please refer to the blog by Paulo Junior.
"The SET UP!"
/people/paulo.junior/blog/2010/11/25/the-set-up
Regards,
Francisco Milán. -
Short dump error while filling setup tables for 2LIS_06_INV
Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
plz can anyone help me out...Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
Information on where terminated
Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
The main program was "RMCENEUR ".
In the source code you have the termination point in line 827
of the (Include) program "LMRMBWF01".
The program "SAPLMRMBW" was started as a background job.
Job Name....... "RMCENEUR"
Job Number..... 10524100
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLMRMBW "; its source code begins in line
806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING t_mcrbkey_bv TYPE mcrbkey_t
807 t_mcrbkey_nbv TYPE mcrbkey_t
808 t_ekbe_acc TYPE t_ekbe
809 CHANGING t_mcrbco TYPE mcrbco_t.
810
811 TYPES: BEGIN OF s_target.
812 TYPES: table_left LIKE rbco.
813 TYPES: table_right TYPE rbex.
814 TYPES: END OF s_target.
815 TYPES: t_target TYPE TABLE OF s_target.
816
817
818 DATA: t_rbco_nbv TYPE t_target,
819 t_rbco_bv TYPE t_target,
820 s_rbco TYPE s_target,
821 s_ekbe LIKE ekbe,
822 s_mcrbco TYPE mcrbco,
823 l_index LIKE sy-tabix.
824
825 * Data source: invoice item non-background
826 IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>> SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828 ON ( rmandt = imandt AND
829 rbelnr = ibelnr AND
830 rbuzei = ibuzei AND
831 rcobl_nr = icobl_nr )
832 INTO TABLE t_rbco_nbv
833 FOR ALL ENTRIES IN t_mcrbkey_nbv
834 WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835 r~belnr = t_mcrbkey_nbv-belnr.
836 ENDIF.
837 * Data source: invoice item background
838 IF NOT t_mcrbkey_bv[] IS INITIAL.
839 SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840 ON ( rmandt = imandt AND
841 rbelnr = ibelnr AND
842 rbuzei = ibuzei AND
843 rcobl_nr = icobl_nr )
844 INTO TABLE t_rbco_bv
845 FOR ALL ENTRIES IN t_mcrbkey_bv
846 WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance
Maybe you are looking for
-
Why are songs from certain iTunes playlists not syncing correctly on my iPhone 4S or iPad?
Songs in my playlists within iTunes do not appear within the playlists on both my iPhone 4S or iPad when I sync these devices to my computer... Anyone have an idea for how to remedy this problem?
-
Timed Access controlling Main and Guest Network
I have a Time Capusle 4G running software v7.5.2. I am running a Guest Network as well as a closed network. In the Timed Access window i have default set to "no access". Then, all the computers that are allowed access to the main network are on the l
-
RFC - PI - SOAP - escape characters
I'm trying to send following payload in an RFC to PI and then onword to SOAP (sharepoint webservice) <Method ID="1" Cmd="New"><Field Name="Title">Added item</Field> However PI replaces "<" into "& # 60 ;" and ">" into "& # 62 ;" (placed spaces in t
-
Dear all, Currently we are using SAP R/3 4.7 on HP-UX with RDBMS oracle 9i. As we know, oracle 9i is out of support so now we want to upgarde it. Can u suggest me some questions relarted to this... 1. How much down time it will require for successful
-
External Storage Solutions-Western Digital-Professional Photographer Views
I am a photographer shooting around 30000 images (RAW) per year. My current configuration is Alu iMac with Aperture 1.5.6, Photoshop C3 on the internal drive with my library and images on external drives. I have a total of 7 drives, all from Western