How to stop duplicate copy from printing

Dear All,
I have a typical scenario where the duplicate copy is getting printed before some cash movements.I have to stop the form from printing and the driver program is standard 1.can the control set in a smartform not to print if the cash movements are not done???
i tired using leave program but it stops the total transaction.
I only want to stop the printing of the smartform.
Reward points for helpful answers.
cheers,
Deepthee.

Hi Deepthee,
This post is covering a similar question how to exit outof a smartform? While it has not been closed yet there may be some suggestions in it you could use.
Regards,
Nick

Similar Messages

How to stop Officejet 6210xi from printing logs

We inherited an officejet 6210xi. (No manual.) It is being used standalone as a fax. It now prints a log for each and every fax. This is a huge waste of paper, so how do we stop it from printing a log every time? Thanks.

Hi,
May be it is the alignment page. Please perform aligning the printer once as per the steps below and check if helps.
Follow these steps to open the printer toolbox and align the printer, if you found defects on the print quality diagnostic report.
1. Load plain white paper in the input tray.
2. Open HP Solution Center:
3. Click Settings.
4. Under Print Settings , click Printer Toolbox . The printer Toolbox opens in a new window.
5. Click the Device Services tab.
6. Click Align the Printheads .
The product aligns the printheads. When the alignment is complete, the product prints an alignment page.
After the successful alignment, restart the printer and check.
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Stop a job from printing

Hope Experts how are you today?
One of our users created a job SD_203_Z_AUTO_DEL. Everytime this jobs runs it prints out. She would like to stop this job from printing. Is there anything in SM37 job overview that I need to change. If not in SM37 than were do I go. I see that SU01 under Spool Control OutputDevice is QU6, but if I change this than she won't be able to print anything. Sorry for the novice question. I don't spend alot of time in SAP these days........

Using transaction SM37, you can select the job from the list and select Job -> Change from the menu. Select the Step button, which will list the steps in the job. Select the step (program) that creates the output and select Step -> Change from the menu. There should be a Print Specifications button at the bottom of the screen. Select this button and then select the Properties button. Change the Time of Printing to 'Send to SAP spool' and save all of your entries.

How to stop Time Machine from backing up Temp Files?

Hi folks!
I am trying to find out how to stop Time Machine from constantly backing up 'useless' temporary files accumulated from web browsing? Although I don't change or add large files to my HD, Time Machine backs up hundreds of MBs every hour. Those file amounts make sense when I consider that I browse a lot to YouTube, SoundCloud, etc to watch videos or listen to music - I just don't want them to be backed up.
Under Time Machine Options I already excluded the following items from backups:
~/Library/Caches
/Library/Caches
~/Downloads
But even though I did this weeks ago, Time Machine stills finds large files to be backed up every hour and my only guess is that I am still missing a location where either Safari or Firefox - the two web browsers I use - store temporary files.
Can you help?
Thanks a lot in advance!

oas2103 wrote:
they come from my anti-virus software
Are you sure you need that? There are no viruses that run on OSX. None. Zip. Zero.
If you're running Windoze on your Mac, that's the same as running it on a PC, so it needs all the same anti-everything stuff you'd use on a PC.
There is some "malware," such as Trojans, for Macs, though. But (unlike viruses that can get onto your system without your knowledge), you must approve their installation (via your Admin password) and/or operation (via the "This application was downloaded from the internet ..." prompt).
Appropriately enough, some of these Trojans are included in pirated versions of Apple software, such as iWork!
For the gory details, see Thomas Reed's [Mac Virus Guide|http://www.reedcorner.net/thomas/guides/macvirus].
Thanks a lot again!
You're quite welcome, and thanks for posting back.

How to stop the Dialog from being dragged

I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
while a dialog is showing.
When it is visible I can still click and drag the Dialog
I want to set it so you can not drag it until the dialog has be closed.

If you don't have access to the parent frame, a "hack" that usually works:
Frame frame = Frame.getFrames()[0];
if (null != frame && frame instanceof JFrame){
JFrame jf = (JFrame)frame;
JDialog jd = new JDialog(jf, "title");
... code here ...
As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

How to stop the Browser from caching my web pages

Hi There
Can anyone tell how to stop the browser from caching my jsp pages
I am using
<%response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
but this does not work anduser is able to go back to the previous page
which i dont want and i want the browser to display the message the page has expired
Help appreciated
Thanks
Mumtaz

response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("max-age", 0);
response.setDateHeader("Expires", 0);
I have cut paste the code from my jsp which is working. There is one additional line. I do not know if that is the cause but there is no harm in trying that out.
Srinivasan Ranganathan

How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

How to stop the dock from showing all hidden images when hiding then showing applications

How to stop the dock from showing all hidden images when hiding then showing applications

It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

HT204406 How to delete duplicate songs from Libary without deleting them from play list or other devices

How to delete duplicate songs from libary without deleting them from playlist or other devices

I'm with you verm71; it's not entirely clear how Apple is expecting you to manage this. I'm going on vacation soon and want to clean up my phone so that it's nice and empty for the new pictures. There doesn't seem to be a way to do this without losing your pictures in the new Photos as well. If imported, it's impossible to see which is the Cloud version and which is the Local version. It's very annoying.
I've also noticed in iPhoto you used to have the ability to locate the original of the picture inside the photo database. That option is not provided in Photos, making finding the original extremely difficult.
It seems to be a great, well-oiled system. But I would love to know how Apple envisions the typical workflow for archiving...

How to stop PR creation from PM work order for a particular vendor?

Hello Experts,
We have following scenario for breakdown maintenance activities.
When a machine breaks down, a breakdown order is created in SAP. The external manintenance services are planned in the order. When the order is released, a single PR (with multiple item numbers corresponding to number of services) is created by SAP. The PR has a release strategy. When PR is released, PO is created followed by the SES.
The practice followed AS -IS for breakdown outside business hours:- If the breakdown happens outside business working hours, the person releasing the PRs is not available & hence PR can not be released resulting in no PO & no subsequent SES.
In this case, the maintenance is completed by the external agency & the work order is TECO. The next day, TECO is reveresed, new PR is created, released, converted into PO, & then SES.
TO-BE process:- Client expects that, for certain vendors identified, PR should not get created at all from the breakdown order. (The list of vendors will be maintained seperately). For these vendors, a framework order will be created at the start of fiscal year & SES will be created as & when required agaainst the framework order.
My concern is :- How to stop PR creation from PM work order for a particular vendor? OR delete the created PR?
Highly appreciate your quick response.
Thank you.
Amit
Note:- My ABAP consultant has checked following BADI's, but could not find it useful.
IWO1_ORDER_BADI
ORDER_COSTING_CK
DATA_EXTENSION_CK
VALUATION_CK
ME_REQ_OI_EXT
IWO1_PREQ_BADI
ME_CHECK_SOURCES
ME_REQ_POSTED
IWO1_ORDER_BADI

Dear Amit
I am giving a different dimension to your question check if it fulfills your requirement -
As we know Vendor selection comes at a later stage only after your PR creation, approval & RFQ etc. & PR generation from maintaine. order is controllled through control key PM03. While triggering PR from order you have to specify Material group, Purchase group and vendor. Try to control it through authorisation as all these are authorisation objects. The persons executing breakdown order shall no t be given this authoriations
shakti

How to delete duplicate pictures from Photo Library

How to delete duplicate pictures from Photo Library in iPhone 3G 16 giga?

The only way to delete photos from the photo library is by the same way the photos were transferred to your iPhone - via the iTunes sync process.
Are you saying a photo or all photos transferred to your iPhone via the iTunes sync process are duplicated in your iPhone's Photo Library without being duplicated in the folder on your computer where these photos are stored?

How to update duplicate row from table

Hi,
how to update duplicate row from table?
First to find duplicate row then update duplicate row with no to that duplicate row in oracle.
can you give me suggestion on it?
Thanks in advance.
your early response is appreciated...

In order to find a duplicate row, see:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1224636375004
(or search this forum, your question has been asked before)
In order to update it, just create and use an Oracle sequence, have it start and increment at a value that doesn't exist in your table.
If that doesn't get you going, post some CREATE TABLE + INSERT INTO statements, and the results you want from them, in other words: a complete testcase.

How to remove duplicates records from output ?

how to remove duplicates records from output ? i used delete adjacent but duplicates records are coming again ..suggest me

hi shruthi,
thanks for ur answer ..but duplicates records coming again
here is my code >> plz check it out
*& Report ZCRM_TROUBLE_TICKET
REPORT zcrm_trouble_ticket.
TYPES : BEGIN OF ty_qmih,
        qmnum TYPE qmnum,
        equnr TYPE equnr,
        iloan TYPE iloan,
        ausvn TYPE ausvn,
        ausbs TYPE ausbs,
        auztv TYPE auztv,
        auztb TYPE auztb,
        iwerk TYPE iwerk,
        END OF ty_qmih,
        BEGIN OF ty_qmel,
        qmnum TYPE qmnum,
        qmtxt TYPE qmtxt,
        indtx TYPE indltx,
        priok TYPE priok,
        strmn TYPE strmn,
        strur TYPE strur,
        ltrmn TYPE ltrmn,
        ltrur TYPE ltrur,
        objnr TYPE qmobjnr,
        arbpl TYPE lgwid,
        vkorg TYPE vkorg,
        vtweg TYPE vtweg,
        spart TYPE spart,
        END OF ty_qmel,
        BEGIN OF ty_ihpa,
        parnr TYPE i_parnr,
        parvw TYPE parvw,
        objnr TYPE qmobjnr,
        END OF ty_ihpa,
        BEGIN OF ty_crhd,
        arbpl TYPE arbpl,
        objid TYPE cr_objid,
        END OF ty_crhd,
        BEGIN OF ty_crtx,
        ktext TYPE cr_ktext,
        objid TYPE cr_objid,
        END OF ty_crtx,
        BEGIN OF ty_qmfe,
        fecod TYPE fecod,
        fegrp TYPE fegrp,
        qmnum TYPE qmnum,
        END OF ty_qmfe,
        BEGIN OF ty_qmur,
        urcod TYPE urcod,
        urgrp TYPE urgrp,
        urtxt TYPE urstx,
        qmnum TYPE qmnum,
        END OF ty_qmur,
        BEGIN OF ty_iloa,
        tplnr TYPE tplnr,
        iloan TYPE iloan,
        END OF ty_iloa,
        BEGIN OF ty_output,
        qmnum TYPE qmnum,
        equnr TYPE equnr,
       iloan TYPE iloan,
        ausvn TYPE ausvn,
        ausbs TYPE ausbs,
        auztv TYPE auztv,
        auztb TYPE auztb,
        iwerk TYPE iwerk,
        qmtxt TYPE qmtxt,
        indtx TYPE indltx,
        priok TYPE priok,
        strmn TYPE strmn,
        strur TYPE strur,
        ltrmn TYPE ltrmn,
        ltrur TYPE ltrur,
       objnr TYPE qmobjnr,
       arbpl TYPE lgwid,
        vkorg TYPE vkorg,
        vtweg TYPE vtweg,
        spart TYPE spart,
        parnr TYPE i_parnr,
        parvw TYPE parvw,
        arbpl TYPE arbpl,
       objid TYPE cr_objid,
       arbpl1 TYPE arbpl,
        ktext TYPE cr_ktext,
        fecod TYPE fecod,
        fegrp TYPE fegrp,
        urcod TYPE urcod,
        urgrp TYPE urgrp,
        urtxt TYPE urstx,
        tplnr TYPE tplnr,
        END OF ty_output.
DATA : it_qmih TYPE STANDARD TABLE OF ty_qmih,
       it_qmel TYPE STANDARD TABLE OF ty_qmel,
       it_ihpa TYPE STANDARD TABLE OF ty_ihpa,
       it_crhd TYPE STANDARD TABLE OF ty_crhd,
       it_crtx TYPE STANDARD TABLE OF ty_crtx,
       it_qmfe TYPE STANDARD TABLE OF ty_qmfe,
       it_qmur TYPE STANDARD TABLE OF ty_qmur,
       it_iloa TYPE STANDARD TABLE OF ty_iloa,
       it_output TYPE STANDARD TABLE OF ty_output,
       wa_qmih TYPE ty_qmih,
       wa_qmel TYPE ty_qmel,
       wa_ihpa TYPE ty_ihpa,
       wa_crhd TYPE ty_crhd,
       wa_crtx TYPE ty_crtx,
       wa_qmfe TYPE ty_qmfe,
       wa_qmur TYPE ty_qmur,
       wa_iloa TYPE ty_iloa,
       wa_output TYPE ty_output.
INITIALIZATION.
REFRESH : it_qmih,
            it_qmel,
            it_ihpa,
            it_crhd,
            it_crtx,
            it_qmfe,
            it_qmur,
            it_iloa,
            it_output.
CLEAR:     wa_qmih,
             wa_qmel,
             wa_ihpa,
             wa_crhd,
             wa_crtx,
             wa_qmfe,
             wa_qmur,
             wa_iloa,
             wa_output.
start-of-selection.
SELECT qmnum
          equnr
          iloan
          ausvn
          ausbs
          auztv
          auztb
          iwerk
          FROM qmih
          INTO TABLE it_qmih.
SORT it_qmih BY qmnum .
DELETE ADJACENT DUPLICATES FROM it_qmih COMPARING qmnum equnr iloan ausvn ausbs auztv auztb iwerk.
SELECT   qmnum
           qmtxt
           indtx
           priok
           strmn
           strur
           ltrmn
           ltrur
           objnr
           arbpl
           vkorg
           vtweg
           spart
           FROM qmel
           INTO TABLE it_qmel
           FOR ALL ENTRIES IN it_qmih
           WHERE qmnum = it_qmih-qmnum.
SORT it_qmel BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmel COMPARING qmnum
                                                     qmtxt
                                                     indtx
                                                     strmn
                                                     strur
                                                     ltrmn
                                                     ltrur
                                                     objnr
                                                     arbpl
                                                     vkorg
                                                     vtweg
                                                     spart.
IF it_qmel IS NOT INITIAL.
    SELECT parnr
           parvw
           objnr
           FROM ihpa
           INTO TABLE it_ihpa
           FOR ALL ENTRIES IN it_qmel
           WHERE objnr = it_qmel-objnr.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_ihpa COMPARING parnr
                                                     parvw
                                                     objnr.
IF it_qmel IS NOT INITIAL.
    SELECT arbpl
           objid
           FROM crhd
           INTO TABLE it_crhd
           FOR ALL ENTRIES IN it_qmel
           WHERE objid = it_qmel-arbpl.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crhd COMPARING arbpl
                                                     objid.
IF it_qmel IS NOT INITIAL.
    SELECT ktext
           objid
           FROM crtx
           INTO TABLE it_crtx
           FOR ALL ENTRIES IN it_crhd
           WHERE objid = it_crhd-objid.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_crtx COMPARING ktext
                                                    objid.
IF it_qmih IS NOT INITIAL.
    SELECT fecod
           fegrp
           qmnum
           FROM qmfe
           INTO TABLE it_qmfe
           FOR ALL ENTRIES IN it_qmih
           WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmfe BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmfe COMPARING fecod
           fegrp.
IF it_qmih IS NOT INITIAL.
    SELECT urcod
           urgrp
           urtxt
           qmnum
           FROM qmur
           INTO TABLE it_qmur
           FOR ALL ENTRIES IN it_qmih
           WHERE qmnum = it_qmih-qmnum.
ENDIF.
SORT it_qmur BY qmnum.
DELETE ADJACENT DUPLICATES FROM it_qmur COMPARING urcod
                                                     urgrp
                                                     urtxt.
IF it_qmih IS NOT INITIAL.
    SELECT tplnr
            iloan
            FROM iloa
            INTO TABLE it_iloa
            FOR ALL ENTRIES IN it_qmih
            WHERE iloan = it_qmih-iloan.
ENDIF.
DELETE ADJACENT DUPLICATES FROM it_iloa COMPARING tplnr
                                                    iloan.
LOOP AT it_qmih INTO wa_qmih.
    wa_output-qmnum = wa_qmih-qmnum.
    wa_output-equnr = wa_qmih-equnr.
   wa_output-iloan = wa_qmih-iloan.
    wa_output-ausvn = wa_qmih-ausvn.
    wa_output-ausbs = wa_qmih-ausbs.
    wa_output-auztv = wa_qmih-auztv.
    wa_output-auztb = wa_qmih-auztb.
    wa_output-iwerk = wa_qmih-iwerk.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_qmel INTO wa_qmel WITH KEY qmnum = wa_qmih-qmnum.
    wa_output-qmtxt = wa_qmel-qmtxt.
    wa_output-indtx = wa_qmel-indtx.
    wa_output-priok = wa_qmel-priok.
    wa_output-strmn = wa_qmel-strmn.
    wa_output-strur = wa_qmel-strur.
    wa_output-ltrmn = wa_qmel-ltrmn.
    wa_output-ltrur = wa_qmel-ltrur.
   wa_output-objnr = wa_qmel-objnr.
   wa_output-arbpl = wa_qmel-arbpl.
    wa_output-vkorg = wa_qmel-vkorg.
    wa_output-vtweg = wa_qmel-vtweg.
    wa_output-spart = wa_qmel-spart.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_ihpa INTO wa_ihpa WITH KEY objnr = wa_qmel-objnr.
    wa_output-parnr = wa_ihpa-parnr.
    wa_output-parvw = wa_ihpa-parvw.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_crhd INTO wa_crhd WITH KEY objid = wa_qmel-arbpl.
    wa_output-arbpl = wa_crhd-arbpl.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_crtx INTO wa_crtx WITH KEY objid = wa_crhd-objid.
    wa_output-ktext = wa_crtx-ktext.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_qmfe INTO wa_qmfe WITH KEY qmnum = wa_qmih-qmnum.
    wa_output-fecod = wa_qmfe-fecod.
    wa_output-fegrp = wa_qmfe-fegrp.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_qmur INTO wa_qmur WITH KEY qmnum = wa_qmih-qmnum.
    wa_output-urcod = wa_qmur-urcod.
    wa_output-urgrp = wa_qmur-urgrp.
    wa_output-urtxt = wa_qmur-urtxt.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
    READ TABLE it_iloa INTO wa_iloa WITH KEY iloan = wa_qmih-iloan.
    wa_output-tplnr = wa_iloa-tplnr.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM it_output COMPARING        qmnum
                                                              equnr
                                                              ausvn
                                                              ausbs
                                                              auztv
                                                              auztb
                                                              iwerk
                                                              qmtxt
                                                              indtx
                                                              priok
                                                              strmn
                                                              strur
                                                              ltrmn
                                                              ltrur
                                                              vkorg
                                                              vtweg
                                                              spart
                                                              parnr
                                                              parvw
                                                              arbpl
                                                              ktext
                                                              fecod
                                                              fegrp
                                                              urcod
                                                              urgrp
                                                              urtxt
                                                              tplnr.
*CALL FUNCTION 'STATUS_TEXT_EDIT'
EXPORTING
CLIENT                  = SY-MANDT
FLG_USER_STAT           = ' '
   objnr                   =
ONLY_ACTIVE             = 'X'
   spras                   = en
BYPASS_BUFFER           = ' '
IMPORTING
ANW_STAT_EXISTING       =
E_STSMA                 =
LINE                    =
USER_LINE               =
STONR                   =
EXCEPTIONS
OBJECT_NOT_FOUND        = 1
OTHERS                  = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
   id                            =
   language                      =
   name                          =
   object                        =
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
   lines                         =
EXCEPTIONS
ID                            = 1
LANGUAGE                      = 2
NAME                          = 3
NOT_FOUND                     = 4
OBJECT                        = 5
REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*LOOP AT IT_OUTPUT INTO WA_OUTPUT.
*WRITE : / WA_OUTPUT-qmnum,
         WA_OUTPUT-equnr,
         WA_OUTPUT-iloan,
         WA_OUTPUT-ausvn,
         WA_OUTPUT-ausbs,
         WA_OUTPUT-auztv,
         WA_OUTPUT-auztb,
         WA_OUTPUT-qmtxt,
         WA_OUTPUT-indtx,
         WA_OUTPUT-strmn,
         WA_OUTPUT-strur,
         WA_OUTPUT-ltrmn,
         WA_OUTPUT-ltrur,
         WA_OUTPUT-objnr,
         WA_OUTPUT-arbpl,
         WA_OUTPUT-parnr,
         WA_OUTPUT-parvw,
         WA_OUTPUT-objid,
         WA_OUTPUT-ktext,
         WA_OUTPUT-fecod,
         WA_OUTPUT-fegrp,
         WA_OUTPUT-urcod,
         WA_OUTPUT-urgrp,
         WA_OUTPUT-urtxt,
         WA_OUTPUT-tplnr.
*ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      filename                        = 'E:\CRM1.TXT'
FILETYPE                        = 'ASC'
APPEND                          = ' '
     write_field_separator           = '|'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
IMPORTING
FILELENGTH                      =
    TABLES
      data_tab                        = it_output
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How do I keep URLs from printing after Events?

Version 3.0.8 (1287) - How do I keep URLs from printing after Events?

Open the Pages preferences > uncheck Automatic detect email and web addresses

How to stop duplicate copy from printing

Similar Messages

Maybe you are looking for