How to stop frame rates from dropping?

Hi, I've been having an issue ever since purchasing the 27inch late 2013 iMac and can't seem to find a solution. I use Quicktime to record with my Logitech c930e webcam, previously used c920 but was told it wasn't "compatible" by apple tech support, but every single time I finish recording its never in 30 Frames Per Second or even 29.97 Frames Per Second.
My problem is that every time I record using QuickTime, my videos are always losing frames and QuickTime is making the videos 29.65 FPS or if I'm lucky 29.77 FPS. I know I can use compressor to convert the files to 29.97 or even 30FPS but by doing that those files will be way too large for my 3TB hard drive in the long run.
Is there any way to fix this solution? Also I record in 720p, or high quality setting, because for some odd reason when recording in the max setting it doesn't allow me to record in 1080p, unless I unplug the camera and plug it back in, it makes the resolution 2304 x 1536.

Similar Messages

How do I convert frame rate from 30p to 24p????

I am about to start post on a short film shot on the mark II. I am going to convert the footage to ProRes. The director wants the "film" look. Can I change the frame rate from 30p to 24p in compressor? Are there any key settings I should know about?

There are lot of different ways to go about it, all have mixed results, and there is no way you'll get flawless results. However, here's a few ways to try:
A) Conform to 23.98, using Cinema Tools - You'll be slowing down the footage, so this is no good if you have on-set dialogue recording you're going to keep and need lip sync. If you weren't going to use any on-set audio and doing all dialogue and FX replacement, it wouldn't matter. This is also effective for music videos - just speed up the audio playback while shooting, and when you slow the video down in post, it'll match.
B) Use retiming in Compressor - I believe this uses some advanced frame blending and optical flow - I've had decent results with this method, but you can end up with some artifacts on high motion material.
C) Use Twixtor within FCP or Adobe After Effects. This has been my preferred method for surgical speed manipulation. It's time consuming and just like method B, you'll get artifacts on high motion material.
What you definitely do NOT want to do is drop your 30p footage into a 24p timeline. The motion will be horribly stuttery. Similarly, don't try to just use frame blending to achieve the frame rate conversion - it's not very impressive to see frame blending all over everything.
You're best results will come from having low motion footage. Interviews, head shots, etc. work great. If you're doing a lot of action, I'd advise against trying to convert using anything but method A. If you can get your hands on the 7D, you can shoot 24p natively.

How can I stop my ipad from dropping wifi connection?

How can I stop my ipad from dropping wifi connection?

Thanks for trying those steps out!
Rtbeal, I would recommend that you contact AppleCare so they can run further tests and diagnostics to help you solve your solution better.
If you can also access an Apple Store Genius Bar or Apple Authorized Service Center, that would be much better.
Go to https://locate.apple.com/country for further support with your device!
Thanks,
KL

How do I stop the toolbar from dropping down when I load a program?

How do I stop the toolbar from dropping down when I load a program? When I close a program Like world or Warcraft for example the toolbar keeps opening up when the World of Warcraft manager reopens How do I stop this for this and other programs
I use, its really annoying and should be fixed or a setting made to stop it from doing this entirely.
KingOfMyPC58

Hi,
Could you please share a screenshot here with us for better understanding this issue.
Regarding to “other programs”, what are these programs, more detailed information would be very helpful.
Regards,
Yolanda
Yolanda
TechNet Community Support

How to stop the Dialog from being dragged

I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
while a dialog is showing.
When it is visible I can still click and drag the Dialog
I want to set it so you can not drag it until the dialog has be closed.

If you don't have access to the parent frame, a "hack" that usually works:
Frame frame = Frame.getFrames()[0];
if (null != frame && frame instanceof JFrame){
JFrame jf = (JFrame)frame;
JDialog jd = new JDialog(jf, "title");
... code here ...
As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

How to stop Time Machine from backing up Temp Files?

Hi folks!
I am trying to find out how to stop Time Machine from constantly backing up 'useless' temporary files accumulated from web browsing? Although I don't change or add large files to my HD, Time Machine backs up hundreds of MBs every hour. Those file amounts make sense when I consider that I browse a lot to YouTube, SoundCloud, etc to watch videos or listen to music - I just don't want them to be backed up.
Under Time Machine Options I already excluded the following items from backups:
~/Library/Caches
/Library/Caches
~/Downloads
But even though I did this weeks ago, Time Machine stills finds large files to be backed up every hour and my only guess is that I am still missing a location where either Safari or Firefox - the two web browsers I use - store temporary files.
Can you help?
Thanks a lot in advance!

oas2103 wrote:
they come from my anti-virus software
Are you sure you need that? There are no viruses that run on OSX. None. Zip. Zero.
If you're running Windoze on your Mac, that's the same as running it on a PC, so it needs all the same anti-everything stuff you'd use on a PC.
There is some "malware," such as Trojans, for Macs, though. But (unlike viruses that can get onto your system without your knowledge), you must approve their installation (via your Admin password) and/or operation (via the "This application was downloaded from the internet ..." prompt).
Appropriately enough, some of these Trojans are included in pirated versions of Apple software, such as iWork!
For the gory details, see Thomas Reed's [Mac Virus Guide|http://www.reedcorner.net/thomas/guides/macvirus].
Thanks a lot again!
You're quite welcome, and thanks for posting back.

How to stop the Browser from caching my web pages

Hi There
Can anyone tell how to stop the browser from caching my jsp pages
I am using
<%response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
response.setDateHeader ("Expires", 0);
%>
but this does not work anduser is able to go back to the previous page
which i dont want and i want the browser to display the message the page has expired
Help appreciated
Thanks
Mumtaz

response.setHeader("Cache-Control", "no-cache");
response.setHeader("Pragma", "no-cache");
response.setDateHeader("max-age", 0);
response.setDateHeader("Expires", 0);
I have cut paste the code from my jsp which is working. There is one additional line. I do not know if that is the cause but there is no harm in trying that out.
Srinivasan Ranganathan

How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

How to stop the dock from showing all hidden images when hiding then showing applications

How to stop the dock from showing all hidden images when hiding then showing applications

It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

How to stop PR creation from PM work order for a particular vendor?

Hello Experts,
We have following scenario for breakdown maintenance activities.
When a machine breaks down, a breakdown order is created in SAP. The external manintenance services are planned in the order. When the order is released, a single PR (with multiple item numbers corresponding to number of services) is created by SAP. The PR has a release strategy. When PR is released, PO is created followed by the SES.
The practice followed AS -IS for breakdown outside business hours:- If the breakdown happens outside business working hours, the person releasing the PRs is not available & hence PR can not be released resulting in no PO & no subsequent SES.
In this case, the maintenance is completed by the external agency & the work order is TECO. The next day, TECO is reveresed, new PR is created, released, converted into PO, & then SES.
TO-BE process:- Client expects that, for certain vendors identified, PR should not get created at all from the breakdown order. (The list of vendors will be maintained seperately). For these vendors, a framework order will be created at the start of fiscal year & SES will be created as & when required agaainst the framework order.
My concern is :- How to stop PR creation from PM work order for a particular vendor? OR delete the created PR?
Highly appreciate your quick response.
Thank you.
Amit
Note:- My ABAP consultant has checked following BADI's, but could not find it useful.
IWO1_ORDER_BADI
ORDER_COSTING_CK
DATA_EXTENSION_CK
VALUATION_CK
ME_REQ_OI_EXT
IWO1_PREQ_BADI
ME_CHECK_SOURCES
ME_REQ_POSTED
IWO1_ORDER_BADI

Dear Amit
I am giving a different dimension to your question check if it fulfills your requirement -
As we know Vendor selection comes at a later stage only after your PR creation, approval & RFQ etc. & PR generation from maintaine. order is controllled through control key PM03. While triggering PR from order you have to specify Material group, Purchase group and vendor. Try to control it through authorisation as all these are authorisation objects. The persons executing breakdown order shall no t be given this authoriations
shakti

Is this how i control frame rate with IMAQdr property node?

Is this how i control frame rate with IMAQdr property node? if not, can someone point me in the right direction? for some reason, it doesnt work..
Attachments:
pic.JPG ‏75 KB

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

Can anyone please tell me how to stop email previews from appearing on my screen. I have turned off the preview option in settings on both my ipad and iphone, but they still keep appearing. Thanks

Can anyone please tell me how to stop email previews from appearing on my screen. I have turned off the preview option in settings on both my ipad and iphone, but they still keep appearing. Thanks

works ok on mine - (5, 7.1.1). Try again. with previews set to none, mine shows the sender and the subject line only. (you cannot get rid of the subject) with the other settings, you get the sender, subject line and however many lines you selected.

HT2188 How to stop the battery from draining

How to stop the battery from draining

I tried everything to stop my battery from draining on my iPad 2 since I have downloaded IOS 7.... Without success. Very disappointed with IOS 7 so far. Apple please release a patch to stop the battery from draining. It is urgent. My iPad is now useless, it is always drained to 0% everytime I open my iPad!?!?!

How to stop volume icon from being displayed randomly

How to stop volume icon from being displayed randomly

Thanks for the quick response.
I have a number of slides which act as a training module. The quiz follows this. All the answers to the quiz are in the module slides. I'd like the user to be able to see which questions they're failing on, but not be shown the answers, as, if they are failing the quiz, the whole module needs to be reviewed and the test retaken.
If this isn't possible, I'll probably just remove the review option, thereby meaning my retake button can stay, and the user can just go back and re-read the module slides to learn the answers.
Thanks

How to stop frame rates from dropping?

Similar Messages

Maybe you are looking for