How to stop Goods Issue when settlement is not completed

An article was created in MM41. A production order number was assigned in KKF1.
User proceed to create PO in ME21N for printing & miscellaneous expenses to be incurred for the same production order number.
GR was carried out when the completed items arrived.
At this point, settlement had not been carried out.
Sales proceed to issue stocks after GR. This result in error MAP / costing.
How can I stop User from issue stock until settlement of the production order had been completed?
Thanks
bye

Add in a function to check the custom requirement

Similar Messages

HT4064 how to do you stop the issue when you have to click several times on your ipad to get into anything?

how to do you stop the issue when you have to click several times on your ipad to get into anything?

I think you have enabled VoiceOver; turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

How to stop while loop when a specified function is terminated?

I want to make a program which has 2 thread, one of which is to control some devices, and the other is to measure outputs of the devices.
To do that, I should make a 2 independent loops, but there comes a problem here.
I want to terminate 2 loops at the same time, but it's difficult for me to do that, because when I try to notify upper sequence's termination to lower loop by some value change, they have some dependency.
That's why I need your help. I want to know how to stop lower loop when the upper sequence's termination keeping their independency.
Please let me know. Thank you.
Attachments:
help.JPG ‏200 KB

Is the upper loop commanding the lower loop at all? I would think you would have some type of communication between the loops. Just use that communication to send a stop command. Or the next best way is to just simply use a notifier.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Goods issue when DO changed

Hello,
Its said that "Goods issue can be posted by changing a single DO".
When a DO is goods issued, the quantity fields cannot be changed anymore.
What is mean by the above quoted statement then?
Why mention GI is possible when a DO is changed? Why not say GI is possible when a DO is created or saved which is more logical?
What scenario is it trying to describe? Any clues? Thanks.
regards
John

Hello John,
Regarding :Goods Issue can be posted by Changing a single outbound delivery.
This is applicable for scenario's like cross docking, where there is no goods movement happening inisde your warehouse. Ideally, you have just go to change mode VL02N of delivery and enter the quantity in picking qty filed under picking Tab.
In this case your outbound delivery will only have picking status, which will chnage from A TO C after saving the delivery
And then you can do the post goods issue after saving the delivery.
Regarding: You can also post the goods issue when the transfer order is confirmed.
This is applicable for materials which are warehouse managed (stock items), where warehouse movements such as picking and confirmation dialog for stock removal is involved.In this case your outbound delivery needs to confirm to status that is picking status and and warehouse managed status.
Picking status changes from A TO C once Transfer order is created and warehouse status changes from A TO C once transfer order is confirmed.
Br,
Tushar

How to stop drop down when trying to open file?

how to stop drop down when trying to open file?

Offer more details and you ay get an answer.
What files/type, applications, what exacttly you are doing?

HT4009 I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

I made a in app purchase on a game and it never took, when I went back and tried it again a window popped up that said I have already purchased this item but has not been downloaded yet? How do I download it when there is not a option to download?

Hi Dave_warr,
I would suggest restarting the iPad and see if the download resumes.
iTunes: How to resume interrupted iTunes Store downloads
Resuming downloads from an iOS device
From the Home screen, tap the iTunes icon.
For iPhone/iPod touch, tap More > Downloads. For iPad, tap Downloads.
Enter your account name and password.
Click the "OK" button.
Click the Resume or Resume All button to start the download.
If you don't see the application to download it, then follow these troubleshooting steps:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If the app does not appear in your list of purchases, then contact the iTunes Store for help:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
I hope this information helps ....
Have a great day!
- Judy

TS1389 When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do I unlock ipod when it is not being recognized by computer and itunes

How do I unlock ipod when it is not being recognized by computer and itunes?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do I open launchpad when it will not open by the suggested methods?

How do I open Launchpad when it will not open by the suggested methods?

Then reinstall OS X. See if that helps:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT1430 How do I restart iPad when buttons are not responding?

How do I restart iPad when buttons are not responding?

GIve the reset another try; nothing to lose.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to stop PO output when the indicators are updated with a prog. **URGENT

Hi,
I have developed a update prg which will update the Final invoice indicator and Goods reciept indicator in SRM as well as in R/3 only for 'ORDERED' PO's. This was done using BBP_PO_PD_UPDATE FM. Everything is working fine, all the indicators are getting updated as expected both in SRM and R/3.
Only problem is that when the indicators are updated in SRM, PO Output is getting generated which should not happen.
Do you have any idea how to stop the OUTPUT.
This is very urgent.
BR,
Parvez.

PO output
PO Output problems
disable PO output on po change in SRM

How to stop screen expansion when I awake in new os update

When I awake my Z10 the screen expands or magnifies itself so I have to squeeze it to fit all the screen in. Very annoying any ideas how to stop it?
Solved!
Go to Solution.

Hi pgaffney,
Please see the following forum post for a resolution to this issue.
Please go into Settings > Accessibility, and ensure the "Magnify Mode" is disabled.
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!

Why MKPF-Doc Type showing as Goods Issue, when I did GR via MB1C tx , ?

Hi Experts,
Via MB1C tx, am posting the Goods Receipt (with out PO type) & MBLNR_1 is creating in MKPF.
But, when I saw the Doc type in MKPF for this MBLNR_1, it showing the doc type as Goods Issue type???
pls. clarify me, Why SAP showing it as Goods Issue?
pls. let me clarify scenario? How SAP processing them?
thanq.

Hi Srikhar,
Since the default document type is maintained in the IMG is WA which is for goods issue . it will reflect as goods issue only.
if u dont want this to happen then Go to the tcode OMBA and select good receipt document type ,
Against the toced MB1C,change the documet type as "WE"which is goods receipts.
hope it wud have answered ur question
Reward if useful
Shawn

How to do good Issue with S/N from DI API

Hai,
I want to do good Issue with Serial Number using DI API but I got an error message <b>"\[IGE1.DocEntry]\[line:0],item serial is not found in Whse SR-5155 - 1 - R5155KGS ' (-5002)" </b>
here is the code
Set oGoodIssue = oCompanyDI.GetBusinessObject(oInventoryGenExit)
        oGoodIssue.DocDate = "12/14/2007"
            oGoodIssue.Lines.itemCode = "SR-5155"
            oGoodIssue.Lines.WarehouseCode = "R5155KGS"
            oGoodIssue.Lines.SerialNumbers.SystemSerialNumber = CStr(1)
            oGoodIssue.Lines.SerialNumbers.ManufacturerSerialNumber = "SR-0000001"
oGoodIssue.Lines.SerialNumbers.InternalSerialNumber = "SR-0000001"
            oGoodIssue.Lines.SerialNumbers.SetCurrentLine 0
            oGoodIssue.Lines.SerialNumbers.Add
        retval = oGoodIssue.Add
        If retval <> 0 Then
            oCompanyDI.GetLastError errMsg, errMsg2
            sbo_application.messageBox errMsg & " (" & errMsg & ")"
        Else
            sbo_application.messageBox "Success"
        End If
I check already from SAP BOne and the serial number is exist
Can someone help me solve this problem
Thanks and Regards,
Arthur Siwan

Hi Arthur,
Try this code ( i had changed only one line of code in your original code)
Set oGoodIssue = oCompanyDI.GetBusinessObject(oInventoryGenExit)
oGoodIssue.DocDate = "12/14/2007"
oGoodIssue.Lines.itemCode = "SR-5155"
oGoodIssue.Lines.WarehouseCode = "R5155KGS"
oGoodIssue.Lines.SerialNumbers.Add
oGoodIssue.Lines.SerialNumbers.SystemSerialNumber = CStr(1)
oGoodIssue.Lines.SerialNumbers.ManufacturerSerialNumber = "SR-0000001"
oGoodIssue.Lines.SerialNumbers.InternalSerialNumber = "SR-0000001"
oGoodIssue.Lines.SerialNumbers.SetCurrentLine 0
retval = oGoodIssue.Add
If retval 0 Then
oCompanyDI.GetLastError errMsg, errMsg2
sbo_application.messageBox errMsg & " (" & errMsg & ")"
Else
sbo_application.messageBox "Success"
End If
Hope it helps you
Regards
Vishnu

How to reverse goods issue for delivery note by using IDoc

Hi all,
I would like to reverse goods issue and picking request for delivery note by using inbound IDoc.
I used message type SHPCON and IDoc type DEVLRY03 for posting goods issue in inbound processing and it's work but I couldn't find solution for posting reverse goods issue.
Pls let me know which IDoc type or any ways for posting goods issue reversal and cancelling picking request.
Thanks for your time.
Su R.

Hello,
          For this requirements we can actually follow two Approaches that I can think of. Here they are.
Approach 1
         Little Complex Approach. What we can do is to make use of the Same Function Module (Posting Program) IDOC_INPUT_DELVRY to do the Delivery Updates (Except reversing the Goods Issue). During this, we can make use of one of the Customer Functions available in the Enhancement V55K0001 and satisfy our Requirement.
Approach 2
        We can actually code a Custom Posting Program (Function Module) in which the first part will take care of updating the Delivery & if the PGI is done, then we can make use of the Function Module BAPI_GOODSMVT_CANCEL to reverse the PGI.
        I think the later Approach is much easier rather than going for the Standard Function Module (Posting Program), Exits and find a place where we have to find another Enhancement Spot / Enhancement where we can call the above FM to Cancel the Goods Movement.
Hope these inputs were helpful.
Thanks and Regards,
Venkat Phani Prasad Konduri

How to stop Goods Issue when settlement is not completed

Similar Messages

Maybe you are looking for