How to stop IDoc jobs?

Dear Sir,
We transfered master data from PRD to QAS by ALE. Since the data is huge, I cease the process on PRD but there were already many IDocs received by QAS. It seems fork many...many...many jobs to deal with these Idocs and they occupied all the background processes to process IDoc. So, when we schedule new jobs and transport change request through STMS, all of these will queued. I deleted all jobs I can see related to RBDAPP01, but in vain, new jobs for IDocs will produce again. Any advice will be appreciate!!
Warm Regards,

Hi,
Try this to stop the active job any further.
Goto SM37, select the job under concern which is in released state and slect Job->Change from the menu bar. Then from the next screen, click on "Start Condition" from the application toolbar. Under the Data/Time criteria, against "No start After" field, fill in the date and time a few mins ahead of the system time. This ensures that the job is not executed after this system time.
~ Bineah.

Similar Messages

How to stop print job in SAP?

Can some help in explaining how to stop print job in SAP .???
i

HI Swati,
Thanks for the additional info. as per previously mentioned use SM37 - however be sure to check the box ''Sched' when performing the search for the job in question (and untick the others so the resulting list will be clearer to read etc.)
You can then choose to delete the job and reschedule it to different periods via SM36
Best of luck,
Rgds, Derrick

How to stop Batch Jobs

Hi Gurus,
How to stop Batch Jobs
Thanks
Dave

Dave
You could cancel the Job in SM51 transaction. Choose your PID from SM51 and go to menu-->choose cancel without core. It takes some time to cancel the job completly.
Please check this link
how to cancel or change the background job which is scheduled
Hope this helps
Thnaks
Sat

How to stop the job which is running infinite time......

Hi ,
I created one procedure with the below code. Using dbms_scheduler i created one job and called that program. That job is in sleep mode for long time. How can i stop that job.
create or replace procedure bpc_test_batch
is
begin
dbms_lock(30000000)
end;
Regards,
Thiru

Have you tried this already?
exec dbms_scheduler.stop_job('Your_Job_Name',true);

Dbms_scheduler - how to stop a job in next run

HI All,
I have scheduled a job to run every 20 mins. Its a collection of procedures. During business hours, the scheduled job runs more than 1 hour because of this next cycle will be in queue, Once this cycle completes next wil be triggered in micro seconds.
I need to stop this JOb after completing the current cycle. I tried stop_job. I failed. Also I am not able to find the Job in scheduled state, due to above conditions. Its always in running state. I dont want to stop the current cycle forefully.
Maintenance window is running, I need to stop the Job after it completes current run.
Is it possible ? Can some one help me to achieve this.
Thanks

Thanks for the replies.
I already tried with dbms_scheduler.disable('name');
It failed due to running Job. I dont want do it forcefully due to business requirement. cycle shouldnt be killed.
stop_job - though I stop the next run. subsequent runs are in queue. job frequency is 20 mins. But job runs for 60 to 90 mins. because of this, many jobs which are in queue are kicked off one by one.
How to proceed ?

How to stop backup job on enterprise manager

Hi
I have a rman job on enterprise manager which takes backup of all the datafiles everyday.
How can I temporaraly stop the job and resume later? The job hasnt started yet.
Database is oracle 10g. operating system is unix
regards

If you stop it, it will not run again and you won't be able to reschedule it. Killing sounds like it will solve your problem.
To kill:
Once you click on the "Running" link next to the job_name, you should see these two links (the second one may take a few seconds to show up):
Step: Prebackup
Step: Backup
Click on the "Step: Backup" hyperlink. There will be a "Kill Step" button at the top right corner.
If you don't see it, you can also connect to the database itself and kill the RMAN SIDs. This should show the job's status as "Problems". You can then edit the "Scheduled" job that should have been created.
As for the run tomorrow, make sure you delete the O/S files created by the killed job if they are still there and run "crosscheck backup" (from RMAN or Grid/Manage Backup). This will make sure RMAN doesn't skip any datafiles at the next run.

How to stop the Job work orders to sub contractor failed to deliver goods?

Dear friend,
If a job work vendor didn't deliver the goods in the stipulated time say 50 days this vendor to be stopped for further job work orders. Each and every order follow's the abover rule. How to configure the sap? Manual blocking not required. Automatic blocking is required.
Regards,
TS.
Edited by: tadavarty srinivas on Feb 21, 2008 6:15 AM

u nee to take help of source list but the thing is then system will not allow you to issue any type of po to this vendor
to achive this
stpe1 : activate source list at plant level(as u mentioned it has to be for all the vendors)
step 2: create a source list for all the material (externaly procured material or sub contracter)
step 3: mark the BLK check box in front of that vendor
or
JUST BLOCK THAT PARTICULAR VENDOR USING TCODE XK05

How to stop background job to print papers

Hi all,
I have background job of forms running every day and its printing papers. My requirement is to stop the printing of papers in the background job.
How to do this .
i am using CALL FUNCTION 'GET_PRINT_PARAMETERS and    NEW-PAGE PRINT ON PARAMETERS v_params NO DIALOG.
    NEW-PAGE PRINT OFF.
Thanks
Krupali

Hi,
<li>Set the below before you call NEW-PAGE PRINT ON
lw_pripar-prrel = space.
lw_pripar-primm = space.
<li>Call NEW-PAGE PRINT ON like below
    NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS lw_pripar
      ARCHIVE PARAMETERS lw_arcpar
      NO DIALOG.
Thanks
Venkat.O

How to stop broadcasted jobs

Hello Experts,
We have to stop the broadcasted jobs and un schedule the jobs for the time being.
How to unchedule the broadcasting jobs?
Thanks in advance,
Venkay

Hi,
I checked in RSRD_ADMIN, then I have to go to setting and un schedule the job individually. But i want to unschedule the process chain/job and stop the broadcasting jobs all at once.
do you know any proecess?
Thanks,
Venky

Can somebody please tell me how to stop IDOC before transformation.

My Question is that if we have 2 CSV file and in each file field 6 is the status field if the status is 1 then we have to transform the idoc i.e Generate the Idoc but if the status is 0 then we have to stop the transformation of idoc i.e don't send the idoc.
Can somebody please answer my question as quickly as possible because i am stuck in this scenario.

> Could you please tell me how it's not pickup the file in ID
>
> let suppose i put the condition output =1 for correct file and output = 0 for wrong file but how do the system knows the condition that only generate the idoc if field =6 other don't do anything.
>
> As i am still bit confuse.
Well, when you put conditions in RD under xPath by taking F4 help and choose field6 and then assign a value = 1 in xPath thats it.
now whenever your sender adapter will pick the file and try to send to receiver then it will check the conditon in receiver determination under xPath and if condition is true then only it will process the file otherwise it will not process it.
I guess I have answerd your question.

How to stop spool jobs?

Hi,
I want to stop spool , from getting into SP01 and from printing.
I checked one pf the threads from SDN.
DATA: print_parameters TYPE pri_params.
print_parameters-PRIMM = ''.
print_parameters-PDEST = 'LOCL'.
print_parameters-PRNEW = 'X'.
SUBMIT RCATSTCO TO SAP-SPOOL
SPOOL PARAMETERS print_parameters .
But this still doesnt stop putting data into Spool and print. Program will be scheduled in batch.
Regards
Mohinder Singh Chauhan

thanks

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

How to stop a running job in 10g Scheduler?

The following is a duplicate post. I posted the following to the general database forum before seeing that otn has a new scheduler forum:
I am not able to find in the Admin Guide a method to stop a currently running instance of a job in the 10g scheduler.
In 9i, I run the following script calling DBMS_JOB.broken and DBMS_JOB.remove to shut down currently running jobs:
DECLARE
jobid NUMBER;
CURSOR c1
IS
SELECT job
FROM dba_jobs
WHERE priv_user = 'ME';
BEGIN
OPEN c1;
LOOP
FETCH c1
INTO jobid;
EXIT WHEN c1%NOTFOUND;
DBMS_JOB.broken (jobid, TRUE);
COMMIT;
DBMS_JOB.remove (jobid);
COMMIT;
END LOOP;
CLOSE c1;
END;
How may I create similar code to shut down currently running jobs using DBMS_SCHEDULER in 10g? According to the Admin Guide, disabling jobs with the force option will still allow the job to finish.
How can I terminate a running job in 10g?

You can stop a currently running job using the STOP_JOB api.
STOP_JOB Procedure
This procedure stops currently running jobs or all jobs in a job class. Any instance of the job will be stopped. After stopping the job, the state of a one-time job will be set to SUCCEEDED whereas the state of a repeating job will be set to SCHEDULED or COMPLETED depending on whether the next run of the job is scheduled.
Syntax
DBMS_SCHEDULER.STOP_JOB (
job_name IN VARCHAR2
force IN BOOLEAN DEFAULT FALSE);
Parameters
Table 83-44 STOP_JOB Procedure Parameters
Parameter Description
job_name
The name of the job or job class. Can be a comma-delimited list. For a job class, the SYS schema should be specified.
If the name of a job class is specified, the jobs that belong to that job class are stopped. The job class is not affected by this call.
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOB with force set to FALSE has failed.
Use of the force option requires the MANAGE SCHEDULER system privilege.
Setting force to TRUE is not supported for jobs of type executable.
Usage Notes
STOP_JOB without the force option requires that you be the owner of the job or have ALTER privileges on that job. You can also stop a job if you have the CREATE ANY JOB or MANAGE SCHEDULER privilege.
STOP_JOB with the force option requires that have the MANAGE SCHEDULER privilege.

How to stop a Scheduler Job in Oracle BI Publisher 10g

Hello!
Can someone tell me how can I stop a scheduler job in Oracle BI Publisher 10g?
I scheduled a bursting job to run a report but is running during two days.
I would like to stop it.
Thanks.
Edited by: SFONS on 19-Jan-2012 07:16

Unfortunately there is no way to stop a job once it is being executed. Yes as you read, it is not possible once job has started.
Same thing applies for running queries.
Once queries are sent to the DB BIP loses control over them. The message you see (if any) "Click Here to Cancel" does not stop any query
it is just a message.
I guess you will have to stop/kill the process in your DB
regards
Jorge
p.s If you consider your question answered then please mark my answer as *"Correct"* or *"Helpful"*

How to stop the background job "Sap_collector_for_job_statistic"

Dear All,
Kindly let me know how to stop the Background job "Sap_collector_for_job_statistic" which is running everyday.
We want to stop this background job.
Kindly suggest.
Regards,
Mullairaja

Select the Job using SM37 transaction. In the Menu Choose
Job ---> Cancel Active Job.
Before you do this it may be good idea to check the pid using SM50.
It will be using a Background work process. Check the pid and the status.
Select the same and in the Menu Choose Process --> Cancel with Core.
Refresh and check in SM37 for the Active and Cancelled Jobs.

How to stop IDoc jobs?

Similar Messages

Maybe you are looking for