How to stop loop or VI automatic

hello help me please I'm trying to complete a project in the field of optics. I have an input by a photodiode and a voltage acquisition card, and I generates pulses to move a blade by a motor. I need a diagram in labview that will stop the generation of automatic impulse to stop the motor when the voltage detected by the photodiode etienne a value of 0.8V.and thank you in advance. here is my VI
Attachments:
vi.png ‏135 KB

Duplicate
http://forums.ni.com/t5/LabVIEW/switch-to-stop-automatic/m-p/2743568

Similar Messages

How to stop my 4S from automatically taking hundreds of photos.

How to stop my 4S from automatically taking hundreds of photos. I use an otterbox and I think the buttons get pushed when I put it into the belt clip. Can I disable the side buttons for the camera? I currently have 1.958 photos of my belt that I am deleting one at a time. Help on how to tag and deleted belt photos would be helpful.

As you already know, open camera roll - edit - then select the pictures then trash.

What does my 20 euro simplicity plan include exactly?How to stop my plan renewing automatically?

Hello, i signed up to a new 20 euro simplicity plan today and i topped up direct using the app, i wasnt very clear on exactly what my plan included though and was hoping you could tell me? and i also got a message saying that my offer will automatically renew every 30 days and was wondering how i stop this from happening?

Hi JessieJones
Send me on your number and PIN in a PM and we can check that for you.
-Adam

How to stop Mail from downloading automatically even it is set not too

My mail programme preferences are set to download manually.
In advanced, the account is not 'included in automatically checking for new mail'
I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
Anybody know what could cause this?
How to stop it as I do not want it to download mail at all as I use an other programme for reading and writing mail.

Hi Mulder
What you're describing doesn't make sense. Mail doesn't download mail if it's set to wait for a manual initiation.
I know however...
But once that is check is initiated, any and all waiting mail will be downloaded.
I know.
I've never heard of this happening before, to anyone. Unless your preferences are corrupted, which there's no indication of at this point, something else is triggering Mail to check for new email.
I never heard either, hence posting
But if you're using some other program for sending and receiving email, why would you have that account setup in Mail, as that would defeat the purpose of supposedly using that other program. If you really want to eliminate the possibility of this happening, you would need to delete that account in Mail, and backup the mail for that account before you delete it.
complex issue, but rather keep both programmes.
Otherwise, we need more details, including which version of Mac OS X you're running, and the other program that you're using for email.
OS 10.5.5
Mail 3.5
other programme Entourage

How to stop iphone 4 from automatically download iOS6 update to your phone?

I would like to know how to stop the automatic update of iOS6 download directly to my iphone 4 without me telling it to go ahead and download it. It's so sneaky, it keeps automatically downoading the update (2+GB) and take up that same amount of space on my iphone once I charge it to full power. And it will stay like that along with me losing 2+GB of space to apple unless I install the update.
However, I refuse to install the update when it doesn't have google map, youtube apps and still having problem with wifi connection and data overusage due to some unknown bug and not the customer using it. I have reseted my iphone 3 times back to the original factory setting so I can reclaim that 2GB storage space and keep my iOS5 already, but everytime I did that, it would just redownloaded the update again without asking for my confirmation after I charge the phone to full power. Is there anyway to stop this insanity? I don't want to do hard reset/activate phone again and again just to rid of this automatic download. It's wasting my time, my storage space and my bandwidth....and I do not have unlimited storage space. Please help!!!

I would disable wifi before plugging it in to charge. Eventually, you will need to update as only the current version of IOS will be supported.

How to STOP OS X from automatically changing between language input methods

I want to know if there is a way in OS X Leopard to stop the system from automatically changing the language input method. I use English and Japanese on my computer, but this would apply to anyone using more than one input method.
For example, when I click on a Japanese-language file, the system automatically changes input to Kotoeri (the Japanese-language input method). When I then click on an English-language file it usually, but not always, changes back to English input. But I almost never want to TYPE in Japanese. I just need to be able to read Japanese and to cut and paste from Japanese language files. It is very annoying when I start typing in an English-language file and find the input method has been changed to kotoeri without me realizing it—everything comes out in meaningless Japanese. When I want to type in Japanese, I want to manually change to the Japanese input system. That is, I want English to always be the default input method even if I am manipulating Japanese-language files.
So, I’m wondering if there’s a way to set the computer so that it never AUTOMATICALLY switches between the input methods. I want to be able to switch only manually. In the old days of System 7, 8, and 9, there was a third-party control panel you could get that would do this (I think it was called Stay There!) and I don't remember this being a problem in Tiger or earlier versions of OS X. Is anyone aware of any way to do this in Leopard?
Thank you!
Colin

Well, I do have it set that way, and I can look up there to see where I am, but in the work I do time is critical and I move back and forth between the two languages frequently. It is really a pain and a waste of time to have to look and make a change that should be unnecessary. The problem is not so much that I don't know where I am. It's that I don't want to ever have to think I MIGHT be in anything but English input unless I specifically want to be. In other words, I need to be able to forget about this problem even being a possibility.
Message was edited by: Colin Talcroft

How to stop Mail form downloading automatically

My mail programme preferences are set to download manually. I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
Anybody know what could cause this? How to stop it as I do not want it to download at all.

Thanks haroldo1
haroldo1 wrote:
Verify that Mail/Preferences/General Check for New Mail is set to Manually.
It so is!
Just a guess, you could also eliminate the incoming mail server information and eliminate it's ability to download (...I do not want it to download at all...).
If I do that (and no it never needs to download only upload) Mail flips out as it wants the information. I tried this.

How to stop looping in ActionScript 3.0 document?

Please bear with me, as I am extremley new to this ( i.e, I started yesterday).
I had wanted to just create a simple button that would allow me to move through 4 frames. Since I wasn't sure how to do this, I followed this tutorial : http://http://www.youtube.com/watch?v=Oh_ltA0px0M
Everything worked fine, and I followed it exactly ( except, four frames rather than three). When I was finished, I went to Test Movie. Unfortunatley, instead of me being able to click the buttons, all the frames just kept looping themselves over and over. Yes, I did use the stop(); command, as I used the exact code in that tutorial ( I even tested in on a new frame next to the others) but it still won't work. Help?

Alright, let me rephrase.
When I click Test, instead of being able to press the button, the frames just go through each other too quickly for me to be able to click the button. I did as you suggested and made a new file, and created another completly different button. When I went under Control, Test Movie, and Text, that frame also kept looping itself, even though it was only one frame ( meaning the frame kept flashing). But, when I move the mouse over it and click, it changes color like I had written it too. I assume that's what you mean by normal mouse behavior, right? I just want to know why the frames keep playing, without me pressing the button.

How to stop loop in Revolutions Theme

I wish to stop the looping of the theme in Revolution, I have got to the resources folder and used PlistEdit Pro and found some looping text but would like help as not sure which to alter. I want the theme to run for one minute and then stop. Do hope someone can help.

Welcome to Apple Discussions!
As far as I know, there is no way to have the music just stop playing when it reaches the end. There is the ability to turn looping on or off, but that refers to an entire project, not menu music. You can adjust the length of the loop. To get music that plays for one minute, select a piece that has a duration of one minute or more. Drag that song into the audio well of the menu. Then use the slider to adjust for how long you want it to play. However, once the end of the music is reached, it will start over.
I hope this helps.

How To Stop Loop If....

I do not want my swf to loop and when I go to last frame and
put stop(); in the action script, the movie now doesnt play at all
when opening.
Any ideas???
Thanks
Steve

maybe is playing because u put a stop and in the first frame
;)

How to stop looping?

Forgive me but I am JUST learning. I have created a small
animation and I can't seem to stop it from looping. When I
published it, I went into settings and unchecked the loop box in
the HTML part and then saved it. When I open Internet Explorer and
go to file and open the HTML file it is just fine. But when I try
to place the file (.swf extension) into a page in Dreamweaver and
then preview, it keeps looping.
What am I doing wrong? Thanks!

Mirrasi wrote:
> Ugh, nevermind, I just found it. Looks like there is a
setting within Dreamweaver where I can unloop it. If I missed
anything let me know. Please ignore this newbie. hehe
it is always better to place stop(); whenever you want the
movie to stop.
The parameter "loop" won't always work, it pretty much vary
depends on
what browser you playing the movie in.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

How to stop Microsoft office from automatic opening on MAC OS X 10.7

could anyone help please,
I have Microsoft Application in My Mac pro, when switching on my Mac Microsoft keep opening automatically how can I change this setting?

Just to reiterate. Choose Shut Down or Restart from the Apple menu and make sure this check box is off.
Open the System Preferences. Under the General icon, make sure the check box for "Close windows when quitting an application" is on.

How to stop Mail from downloading automatically?

I have the preferences for mail set to download manually. however, every time I send a mail or sometimes when I start the programme it downloads the mail. anybody know how to fix this?

In Mail preferences, select the Accounts section. For each account, go to the Advanced tab and make sure that the 'Include when automatically checking for new mail' option is unchecked.
That should do it.

How to stop Access Connections from automatically connecting to WAP at turn on or restart?

I had a problem with my X200 winxp sp3 wireless connection. I got it working OK again but in the process I did something that changed the action of Access Connections when I turn on or restart the machine where it automatically connects to the WAP whereas before it did not do this, rather it required a manual connection. For the life of me I can't find the setting that controls this behavior...can anyone point me in the right direction.
thanks for any feedback
*Smith & Wesson...the original point and click interface*

Might not answer completely, but what is your "profile" set to? I have a "profile" called Office that wll only use the "hardwire" LAN Connection. I have another "profile" called Mobile that will only use the Intel Wireless card, yet another that is "HSPA Modem" that will only use the AT&T wireless card.
Could it be that your "profile" is set to use just your Wireless Connection?
Just a thought -
Message Edited by mickey53usa on 01-09-2009 02:01 PM

How to stop preview window from automatically getting focus when you move up/down the message list.

Since updating (my TB was a few versions old) to 31.2, the preview window automatically gets focus when I move up/down the message list. I'm assuming this is a new "feature". Is there a way to shut this off and leave the focus on the message list so I can navigate up/down like before?

You are referring to the 'Message Pane' which displays selected opened emails below the list of emails. It is not a 'preview'.
When you select an email by either using mouse to click on an email in the list or using the arrow keys to select emails up and down the list, you are selecting an email to open and read. That is why it is being opened in the Message Pane so that you can read it.
If you select an email in the list and then cllck anywhere else including in the Message Pane, then you will have moved focus away from the list and the strong highlight on email in list is reduced to paler highlight.
When you click on an email in the list, the email becomes highlighted, at this point you can use eg: arrow keys to move up and down the list.
If you are performing single left click on email in list and then do nothing else and the strong highlight auto changes to paler highlight.
Check you do not have a conflict with an addon by starting Thunderbird in Safe Mode.
Help > select 'Restart with addons disabled'

How to stop loop or VI automatic

Similar Messages

Maybe you are looking for