How to stop mail empty subject field warning

So does anyone know how to stop the dam warning on the I pad? Just went through a restore and this warning is back. I was able to stop it, just can't remember how. <age factor I guess>
Thanks,

Hi there
I have deleted the account from all my devices and set it up again, but the problem continues.  Any other ideas?

Similar Messages

  • How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

    How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

    You need to find and delete (move to the Trash) the offline mail cache (.offline cache.) It's a hidden folder (files and folders with a preceding dot are hidden) inside the Mail folder (inside IMAP) in your user library. Since it's hidden, in order to see it run the following command in Terminal in Applications>Utilities. Hit return/enter once you have pasted in the command.
    defaults write com.apple.finder AppleShowAllFiles -bool true ; killall Finder
    To reverse this and hide all those hidden files and folders again
    defaults write com.apple.finder AppleShowAllFiles -bool false ; killall Finder
    Leave hidden files/folders enabled until you finish emptying the Trash so you know it's gone.

  • How to stop mail from recovering a too large message

    how to stop mail from recovering a too large message

    You can't stop Mail from storing sent messages locally. If they're synchronized with the IMAP server, they'll still be present locally. The only way to get the effect you seem to want is to use webmail.

  • How to stop Mail from selecting addresses from the list of Previous Recipients?

    How to stop Mail from selecting addresses from the list of Previous Recipients?

    This is a related question.
    I deleted ALL my previous recipients and when I create a new e-mail it STILL is getting addresses that I don't want - they pop up and I don't know how to stop this!
    I switched from one ISP to another - I deleted the old e-mail account in MAIL - I DID use the same name on the account - is that why it keeps bringing up the old address? 
    ARGH!

  • Empty text field warning

    I want to have a book printed from Aperture 1.5.4, but when I press the 'Buy Book' button, a dialog pops up:
    "*Empty text field detected in book*
    The book you are about to order contains an empty text field.
    How do you wish to proceed? Cancel/Continue"
    That's all very nice, to give me a warning like that, but how on earth am I going to find one invisible text field in a 50-page book full of colour photos??
    Does anyone have a hint? How problematic is it to leave the text field in? Common sense dictates that an empty text field should not be visible in the printed book either, but knowing Apple's fickleness in book matters... can I be sure? I can generate and check the PDF of course, but I don't know if that's sufficient proof.
    Thanks!

    prauz wrote:
    I want to have a book printed from Aperture 1.5.4, but when I press the 'Buy Book' button, a dialog pops up:
    "*Empty text field detected in book*
    The book you are about to order contains an empty text field.
    How do you wish to proceed? Cancel/Continue"
    That's all very nice, to give me a warning like that, but how on earth am I going to find one invisible text field in a 50-page book full of colour photos??
    hi, prauz
    sounds like there is a text box (unfilled) and you haven't typed nor pasted text into it.
    it's not that the text field is invisible, it's there yet to be selected and filled in with your information. so it is visible. have another looksie at it, look for the default letters or "Title Information Here"...
    victor

  • When typing an iMessage from a Mac or other non iPhone device how do you get a subject field?

    From the iPhone there is now an option to add a subject field to your iMessages.  This can be nice but what about doing it from the MAC or other device.  Also how do you insert a line break (which I'm told is alt/option enter) from an iPhone.  Sorry two questions in one.

    Hi,
    The Messages app on the Mac has no means of indicating a "title" or subject matter.
    It only sends messages be they iMessages to Contacts or IM (instant Messages) to Buddies on various services that you could join.
    Re 1) The AIM service added the ability to use the "/me" lead in/pre-emptive text which adds the little grey center info text to AIM chats as my pics show.
    In other services that do not support "/me" you see a sentence that starts "/me".
    On the iPhone as an  iMessages item it appears like this
    They appear as Sent items due to the Sync process.
    Re 2)  No.
    I am just suggesting using a feature that works in the Messages (and the previous iChat) App using an AIM Account in Messages (as it appears to work at your end all the time in any account) so that you can create something that can be used as a "subject" marker.
    re 3) Yes.
    The original premise was you sent something like "/me waves" which appears like the time stamps as "Your Name waves"  (Your Name on the other depends on what they have in their Address Book or Contacts app as your details (you could appear as just a Buddy ID of some sort.)
    Enlarging part of that earlier pic.
    The so called Subject one.
    Grammatically it could do with a 'has".
    Re 4.
    AOL (who Own AOL Instant Messenger)  gave out AIM names with AOL accounts  and with accounts with other companies that they owned.
    At one time they owned Netscape  Mostly Netscape referred to a Browser that was popular on the Mac at the time.  It had a Messenger part added to what it could do and registration gave you an AIM ID (Screen Name)
    This tended to be the Username part of your your account name which was an email.
    We are talking when there were computers sold by Apple that could boot into OS 9 as easily as they did into OS 10.2.
    iChat 2 that did the first Video chats was in OS X 10.3
    At that point iChat was an AIM only client.  This continued until iChat 3 which added Jabber (and that version required a small amount of work to add a GoogleTalk ID)
    Basically when I bought the G4 Tower listed below I already had an AIM name by preferring to use Netscape over Internet Explorer.
    At various points I have tried ProteusX  (the Original Site seems to have gone now).
    I have also tried AdiumX
    Both these were and are text only multiple service apps.
    I have used Psi  This is a Jabber only app.  It is a bit "windowsy" as it is a cross platform app written in Java (means you have to download and Install Java and keep it updated)
    I got it for doing this http://allforces.com/2005/05/06/ichat-to-msn-through-jabber/
    These instructions need you to be able to "register" for Transport on Jabber servers which then allows you to link to your MSN or other service account to in turn add those Buddies to your Jabber Buddy List.
    I have tended to Stick with using my AIM name as my main form in iChat and Messages because it has the Privacy and Security settings that allow you to Block people, or have Allow Specific people or Allow Buddy List only people as ways of restricting who can see when you are on Line.
    AIM also works with Apple IDs ending with @mac.com and iCloud linked @me.com and @icloud.com  (Lapsed @me.com from MobileMe will not work)
    You have to keep the password to 16 characters or less to work with the AIM servers.
    There is also MeBeam  which has been known as Koowy  (coo-we) for a while and currently seems to promote itself as "CuSeeMe.tv"
    It as a site you will need Flash for.
    It then, when you allow it, has access to your Camera and Microphone and you can video to people in "rooms" (private URL) you create.
    I have tried Skype in it's early days.
    It shares your connection to the internet to make lots of connections to maintain a non centralised service.
    This makes it vunerable to "Man-in-the-Middle" attacks becasue at time you are the man in the middle.
    Each download used to list it's own Specified port to use but if you didn't set it it used port 80 (web Browsing or port 110 (mostly mail) to connect.  Some see this as defeating your firewall or router as it is not made clear in the set up.
    I have Office 2004, and 2008 and whatever the last one for Macs was called. (2011 I see on the box)
    This has MSN Messenger which I have tried but don't like  (Microsoft do some great Apple apps in the Office collection but MSN is not one of the).
    Yahoo has been in some variant of Beta 3 for almost as long as the OS has been OS X  (it is certainly about 8 years).
    It never seems to get to a first GM release.
    This can do "video" but broadcasts this to anyone and the Audio is then to one Buddy.
    Basically iChat was the app I used first and an AIM name I already had.
    Over the years I have created several Apple ID (some during a time when @mac.com name could be registered as "iChat Names"  after the .Mac service had finished).
    AIM have always been there.
    Google has been there some of the way.
    (Other jabber servers can come and go)
    I do have my Yahoo account set up in Messages but it basically was as a test and I rarely use it  (it is only text and does not  do Video in the iChat 6 or Messages apps).
    I am not a great phone user so iMessaging people is limited for me.
    (I know about 2 people who I could iMessage outside of my family).
    10:57 pm      Saturday; March 15, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to STOP Mail from launching at startup

    I hate even posting this question because it seems like I'm missing something easy. I want to stop mail from launching at start-up because I now have entourage.
    I can find how to TURN OFF mail and TURN ON entourage at start up.
    Mail: 2.1.3
    Entourage: 12.2.3

    You're overlooking the obvious, as you suspected.
    Go to System Preferences > Accounts > Login Items and remove Mail from that list. If you want Entourage to startup, add that to the list.
    However, there's no good reason to use Entourage over Mail, especially because it stores all your mail in a single file, so if that file ever becomes corrupted (it will, at the worst possible time) all your mail is gone; it cannot be recovered.
    Secondly, you shouldn't startup applications at launch, since that will slow down your startup time and can easily cause other problems before you even get the chance to do anything with the computer. If you need to use a program, launch it after the Finder has loaded completely.

  • How to stop Mail from downloading automatically even it is set not too

    My mail programme preferences are set to download manually.
    In advanced, the account is not 'included in automatically checking for new mail'
    I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
    Anybody know what could cause this?
    How to stop it as I do not want it to download mail at all as I use an other programme for reading and writing mail.

    Hi Mulder
    What you're describing doesn't make sense. Mail doesn't download mail if it's set to wait for a manual initiation.
    I know however...
    But once that is check is initiated, any and all waiting mail will be downloaded.
    I know.
    I've never heard of this happening before, to anyone. Unless your preferences are corrupted, which there's no indication of at this point, something else is triggering Mail to check for new email.
    I never heard either, hence posting
    But if you're using some other program for sending and receiving email, why would you have that account setup in Mail, as that would defeat the purpose of supposedly using that other program. If you really want to eliminate the possibility of this happening, you would need to delete that account in Mail, and backup the mail for that account before you delete it.
    complex issue, but rather keep both programmes.
    Otherwise, we need more details, including which version of Mac OS X you're running, and the other program that you're using for email.
    OS 10.5.5
    Mail 3.5
    other programme Entourage

  • How to stop Mail form downloading automatically

    My mail programme preferences are set to download manually. I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
    Anybody know what could cause this? How to stop it as I do not want it to download at all.

    Thanks haroldo1
    haroldo1 wrote:
    Verify that Mail/Preferences/General Check for New Mail is set to Manually.
    It so is!
    Just a guess, you could also eliminate the incoming mail server information and eliminate it's ability to download (...I do not want it to download at all...).
    If I do that (and no it never needs to download only upload) Mail flips out as it wants the information. I tried this.

  • How to stop mails from unknown user

    Hi All
    This is my messaging server version.
    ./imsimta version
    iPlanet Messaging Server 5.2 HotFix 1.21 (built Sep 8 2003)
    libimta.so 5.2 HotFix 1.21 (built 18:35:22, Sep 8 2003)
    SunOS mum1pp1-a-fixed 5.8 Generic_117350-26 sun4u sparc SUNW,Sun-Fire-880
    One of our USER is frequently getting some mails which is not
    addressed to him
    To say clearly
    Our user mail id is ([email protected]) but in the below output
    The mail is sent to [email protected] and
    The mail is sent from [email protected]
    but i don't know how our user is getting that copy of mail and the user
    camaad1 (invalid user) is not avaliable in our domain.
    My ques.....
    1. How to rectify this problem ??
    2. Spamassassin is configured on our servers and i think we have to
    tune spamassassin to solve this problem ?? can any body tell me
    how to tune ???
    Check the below output
    Date:
    Mon, 27 Nov 2006 14:28:17 +0220
    From:
    Katharine Charles <[email protected]>
    Subject:
    Katharine wrote
    To:
    [email protected]
    Message-ID:
    <01c71230$47857fd0$6c822ecf@deborapms>
    MIME-version:
    1.0
    X-MIMEOLE:
    Produced By Microsoft MimeOLE V5.50.4133.2400
    X-Mailer:
    Microsoft Office Outlook, Build 11.0.5510
    Content-type:
    text/plain; charset=iso-8859-2
    Content-transfer-encoding:
    7bit
    X-Priority:
    3 (Normal)
    X-MSMail-priority:
    Normal
    Thread-index:
    Aca6Q0-'>UFR08/)'7T./Q5?V4@14+==
    Original-recipient:
    rfc822;[email protected]
    X-Mozilla-Status:
    8001
    X-Mozilla-Status2:
    00000000
    X-UIDL:
    10096-1043648961
    Thanks in Advance

    Hi,
    1. The version of Messaging you're using, is very,
    very old. If you do not have a support contract, you
    should at least download and apply 5.2p2.
    What difference does it makes ?? can you explain
    me..So Jay doesn't have to re-explain this for the thousandth time.
    5.2p2 contains hundreds of fixes and can pro-actively fix problems that you may have not hit yet. We always recommend that customers all use up-to-date software if possible. In the same way that you should be patching your Operating System and other applications.
    my ques ...
    What will happen if i'm using "dnsverify" keyword in
    TCP local channel ??
    can you explain me ??Do you mean the dns_verify keyword in the mapping table or the mailfromdnsverify channel keyword?
    Either way I recommend you look at the iMS5.2 Admin Guide which explains both of these keywords and how to use them.
    Regards,
    Shane.

  • How to stop mail from checking a non-existing smtp account?

    Mail keeps checking a smtp account for an eamil where I have an exchange account.  If I use the mail connection doctor, it clearly shows that mail keeps trying to connect but fails.  This ties up my wireless network and is annoying.  How do I stop this?  Where could I find this account to delete it?  It does not show up in the list of accounts.

    I found a good explaination at
    https://discussions.apple.com/message/6865787#6865787
    that tells me that I actually have to remove the old outgoing mail servers.  Its not enought to just turn them off.

  • How to stop Mail from showing **** images?

    Mail doesn't show images from most of my junk mail, but it does show the pornographic ones. How can I make it stop?

    If you want to display attached pictures as icons, close Apple Mail, open Terminal, issue this command
    defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
    To get back to the default picture view, close Apple Mail, open Terminal, issue this command
    defaults delete com.apple.mail DisableInlineAttachmentViewing

  • How to Stop Mail from automatically download small images to my computer.

    I look into the documents on my computer and it is all these little images from emails i received. How do I stop it from downloading?

    as well Check your Mail>Preferences>General

  • How to stop mail downloading ALL of my hotmail emails

    Basically I am setting up Mail, and it is downloading ALL of my hotmail emails... there's 1623 of them! How can I stop this? Perhaps letting it only download emails from the past 2 weeks etc?

    What version of [Mac] OS X are you running on your Mac? (Your profile says iOS 7.0.1, but that system is for iPhones and iPads, not Macs.)
    If you are running a recent version of OS X, Mail should have a mailbox group named "FLAGGED" in the left sidebar. Click on it to view all flagged messages; click on one of the flag colors listed under it to view messages flagged with that color.

  • How to stop Mail grabbing wrong address?

    Since doing one of the Snow Leopard updates (currently 10.6.7) Mac Mail on both our Macs occasionally pulls out a similar first or last name from our Address Books and switches the address already in the TO: field to that wrong address!  Even when I double-check before hitting Send it frequently makes the change anyway and I only know when I look at the sent msg in my Sent Folder and it has the wrong email address. There must be a way to stop this.

    What do you mean by already in the TO?  If it is already there, it should not get changed.  However, if you are typing it in, then stop on the first, correct one, and click on it.  It will stay in the To.
    It there are two valid addresses, with similar names, then you must be alert.  However you also may want examine the Previous Recipients addresses (Windown/Previous Recipients) and remove any no longer valid or useful.
    Ernie

Maybe you are looking for

  • Error Publishing Policy

    Hi, I encountered an error when publishing a policy to the clients. The error message is displayed in a dialog box after clicking on "Publish". "The Management Console was unable to complete the policy assignment. The requested policy assignment has

  • 32 bit setting ?

    I sometimes use Audio Hijack Pro to record lectures. On my Mac Book Pro I have recently started using Safari instead of Firefox, partly because I want to sync my bookmarks with Safari on my iPhone. It is faster but one problem is that whenever I try

  • Ordering notebook outside of US?

    Hello, I'm from the Netherlands, and I want to order a notebook from Best Buy, is that possible? Or is it U.S. only? Thanks in advance, Paul Solved! Go to Solution.

  • System memory issue

    My system runs very slowly at times and returns "not enough memory" messages. I have run the HW test and have 4GB avail, what could be wrong?

  • Determining Gapless playback Info Trouble

    I upgraded from itunes v6 to v7, it loaded fine but with the new version(v7) it automatically starts to scan my music list (about 13,000 songs)and it says "determing gapless playback information" it starts making its way through my song list fine but