How to Stop "Password Incorrect" Prompt for Exchange
OK, first off, please don't say "enter the correct password". I am, but my company's Exchange server is having some issues and it's not accepting requests from the iPhone (or other ActiveSync devices).
As such, I'm getting the popup/prompt that says "Password Incorrect". When my company fixes their end, I'm sure it'll be fine, but for now, how do I get it to stop popping up? Doesn't matter if I hit "Cancel" or "OK", it just comes back 10 seconds later. I've turned off PUSH and FETCH, so I don't know why it's still making requests to the server.
This is getting really annoying. I can't type a SMS message, surf the web, or listen to my music without it getting in my way every 10 seconds. I've tried rebooting the phone, but that did nothing.
Any help is appreciated. Thanks in advance
Well I never setup an Exchange account, but with other accounts, when you go into Settings, then Mail, Calendar etc Settings. I can go into any of my mail accounts setup and there is a flip switch to just turn off. It leaves all the settings to be there later when you turn that account back on, but turning it off fully removes it from the Mail app.
Similar Messages
-
Suddenly getting 'password incorrect' message for Exchange account Hotmail.
Suddenly getting this mail error message on my iPad3. I enter the correct password (works fine on my pc) but iPad doesn't accept it. It won't accept the 'cancel' button either, so I'm stuck on this screen, and can't use the ipad. Can anyone help?
Try this to get the iPad to function again.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
After the iPad boots up - try this for the password issue.
Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
How to stop Firefox from checking for add-on compatibility every time it opens?
How to stop Firefox from checking for add-on compatibility every time it opens?
That can be a problem with the compatibility.ini file in the Firefox profile folder.
Try to rename (or delete) the compatibility.ini file in the Firefox profile folder to see if that helps.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can also check for problems with preferences.
Delete possible user.js and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences -
Stop Crystal from Prompting for Parameters
Hi there,
I am trying to stop Crystal from prompting for a parameter that has the Optional Prompt flag set to True as I want to use the HasNoValue attribute to retrieve all records when there is not a specific value sent to the parameter.
When the parameter is created from a store procedure, I can simply set the value to nothing and handle the resulting NULL in the procedure.
I was expecting that I could do the same for the regular parameters but this returns a "parameter field and parameter field current values are not compatible" error.
I have tried setting the HasCurrentValue to True but this is a read only attribute.
I have also tried setting the Viewer.ReuseParameterValuesOnRefresh to False (and True) but the report still prompts for the parameter.
I have searched the web for the last two days and have had no joy on this so any help or pointers would be appreciated.
Thanking you in advanceHi Don,
I am using Crystal 2008 for both the report and the assemblies.
Using the word All is not really an option as I need to process all types of parameters i.e. Boolean, integers and dates as well as strings.
I could create some complex formulas to handle this but I need the report creation to be simple as possible as possible so that the customer can create reports at will.
Using the Optional Prompt feature now available in 2008 I can create a simple record selection formula that looks like something like this :-
(not HasValue({?MyParameter}) OR {Table1.Field1} = {?MyParameter})
My problem is getting the parameter to register through my code that it has been set to HasValue = False so that the user is not prompted by the viewer to enter the parameter again. -
How do I set up Mail for Exchange on my N97 mini?
How do I set up Mail for Exchange on my N97 mini? I want to read my work email from outlook to my mobile.
You can download mail for exchange to a pc or laptop then use nokia pc suite to install it.
The bug still exists were your email will be show up as being sent from Mail For Exchange and not you name
Anyone know a way around that? -
HI
how to check RBS maintainer is running after deleting orphan blobs and while deleting the blobs from rbs storage,
and also how to stop the RBS maintainer for a specific content db.
when I run below query I found the orphancleanup value true
SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
where config_key='orphan_cleanup_in_progress'
adilHI
the RBS maintainer was run from one of web front end server And for one content database , that fine
but I now know this information only this did by other administrators.
Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and also I found this maintainer running I checked from when run sql queriy in sql
server
SELECT
[config_key],[config_value]
FROM
[mssqlrbs_resources].[rbs_internal_config]
where
config_key='orphan_cleanup_in_progress’
it given me true
here now I want to stop this orphan cleane up , what settings and script I will run?
adil -
How to stop my iphone 5 for flipping my photo when i use the front camera.
How to stop my iphone 5 for flipping my photo when i use the front camera.
You don't. Look in the mirror...now raise a hand...get the picture?
Same thing applies with your phone. -
Prompted for Exchange password, but no Exchange account
I have a user that has an iPhone 3GS and she says it was updated a month ago. Today the iPhone started to ask her for her Exchange password continuously. After removing the Exchange account from the iPhone, removing the pairing from Exchange server, closing all open apps, and a hard restart, the iPhone prompts for the Exchange password after a reboot. The strange thing is the account has been removed and the prompt doesn’t look like a normal dialog. I’m thinking herphone has been compromised. Any suggestions?
Here is my iPhone dialog box prompt. Not only does it look different, but it specifically states what account.
-
I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365
On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook,
any other option on exchange admin center for the same,
I want to know how to setup Outlook 2013 and 2010 to receive PASSWORD EXPIRY NOTIFICATION without log in domain,Hi
As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
I suggest you run Office 365 desktop apps reffering to the steps below: -
Step1: - Login to Office 365 Portals.
Step 2: - In the right pane, click
Downloads under Resources.
Step 3: - Click Set up under
Set up and configure your Office desktop apps.
Moreover, please confirm the password policy by the
PowerShell cmdlet.
Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
Step 2: - Run Connect-Msolservice command.
Step 3: - Get a password policy by the following PowerShell cmdlet:
Get-MsolPasswordPolicy –DomainName yourdomain.com
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
How to stop pwsswd change option for Admin user id or SLD or monitor ID
Hello frineds,
As I know we do have one option to disable password change prompt using J2EE Admin tool ( Go to security provider->Usermanagement and search for the user
Select the user and check "No password change required") but this option checked for all user users by default and it prompting password change after 90 days (default).
Is there any other way to stop change password prompt for admin user ID's?
Any help is a great help
Thanks and regards,
VenkatHi,
I think we need to change the parameter value in the document type definition.
Check this: http://www.atg.com/repositories/ContentCatalogRepository_en/manuals/ATG6.0.0/intframe/intframe0210.html
Please check with your BASIS team regarding this.
Thanks, -
How to stop the changes made for the BP in CRM not to update in R/3
Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram RaghuHello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72 -
How to do the hard recovery for exchange 2010 (No Restore.env generated)
enrollment:Windows server 2008 R2, exchange 2010.
I want to test the fundamentally of eseutil /cc
so I backup the exchange database by Using the Windows backup, then I restore the database, and no Restore.env be found.But I found I can run the
eseutil /r.
what's happened?
1,why No Restore.env generated for exchange 2010 in Windows server 2008 r2?
2,why I can do the soft recovery after the restoring the database?
3, how to do the hard recovery for this situation(No Restore.env )?
Please click the Mark as Answer button if a post solves your problem!Hi Eric,
From your description, I would like to clarify the following things:
1. Before performing the restore process, we need to dismount the Exchange databases that we want to restore. If the database is still mounted, the restore process will fail. If the restore process doesn't succeed, Restore.env won't be generated.
2. It is because the log files are healthy, you can run Eseutil/r and perform soft recovery.
3. In your case, you can continue to perform the soft recovery.
For more information about hard recovery and soft recovery, here are some helpful threads for your reference.
Exchange Server Soft and Hard Recovery
http://technet.microsoft.com/en-us/library/aa996168(v=exchg.65).aspx
Exchange Database Recovery – Using eseutil commands (Note: It isn't from Microsoft, please pay attention to refer to it.)
http://msexchangeguru.com/2009/07/12/exchange-database-recovery-using-eseutil-commands/
Hope it helps.
If there any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support
" If the restore process doesn't succeed, Restore.env won't be generated. "
thank you for you reply.The restore process succeed,otherwise I can't do the soft recovery after the restoring the database,but can't see the restore.env
Please click the Mark as Answer button if a post solves your problem! -
I have Exchange 2010 SP3 in my environment and am migrating to Exchange 2013. Whenever a mailbox is migrated, the Outlook 2013 client will prompt the user with a "the exchange administrator has made a change that requires you to restart
Outlook". When the user does so, he or she is prompted again. After he or she closes and reopens Outlook for the second time, the issue is gone permanently.
I've seen a number of other posts about repeated prompts like this but I haven't yet found one or someone gets exactly 2 prompts for each client and no more.
A couple of pieces of information that may be relevant:
1. On exchange 2013, the authentication method for the internal host name is NTLM
2. I have not yet migrated public folders from Exchange 2010. I plan to do that after the mailbox migration is complete.
Thanks in advance for your help.Hi,
From your description, after mailboxes are moved from Exchange 2010 to Exchange 2013, users receive the following prompt when opening Outlook.
The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook.
In order to solve this issue, you need to apply the Outlook update that is described in KB 2863911.
For your reference:
Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
https://support.microsoft.com/kb/2934750?wa=wsignin1.0
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support -
Hi experts,
I'm trying to stop the authentication retry for the guests. They won't have the credential to be authorzied and will be put in the guest VLAN. However the switch seems by default always retries the authentication every 15 seconds or so. It's fine if the guests are few but I'm implementing it at a hotel where most users are guests (like 1000 of them at the same time...).
I really need to turn it off or at least find some timer to decrease the frenquency... It's urgent because the hotel is about to open... The following is the config I put on an interface:
switchport access vlan 1055
switchport mode access
switchport nonegotiate
switchport voice vlan 657
ip access-group ACL_PortIso_IDF21 in
authentication event fail action authorize vlan 1055
authentication event no-response action authorize vlan 1055
authentication host-mode multi-domain
authentication port-control auto
authentication violation protect
mab
no snmp trap link-status
dot1x pae authenticator
dot1x timeout quiet-period 300
dot1x timeout tx-period 2
dot1x timeout supp-timeout 2
dot1x max-reauth-req 10
dot1x timeout held-period 300
no cdp enable
spanning-tree portfast
spanning-tree bpduguard enable
no ip igmp snooping tcn flood
Thanks!Elly,
Soon I will have a Windows laptop plugged in. Then I will be able to run the wireshark. Now I have to run the "debug dot1x packets" since the attached device is a phone.
So first I "clear dot1x session int f3/0/13". After a couple of "failure" eventually it will show this:
"%AUTHMGR-5-SUCCESS: Authorization succeeded for client (Unknown MAC) on Interface Fa3/0/13"
(Weird... why it's showing "success"? Anyway when the authentication restarts again after several minutes there won't be any "sucess" any more, as shown in my previous text file. They are)
Then I have the debug turnned on:
.Jan 25 12:47:21: %AUTHMGR-5-START: Starting 'dot1x' for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
INDJWSW01-2104#
.Jan 25 12:47:21: EAPOL pak dump Tx
.Jan 25 12:47:21: EAPOL Version: 0x3 type: 0x0 length: 0x0005
.Jan 25 12:47:21: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
.Jan 25 12:47:21: dot1x-packet(Fa3/0/13): EAPOL packet sent to client 0x5600009F (0019.f302.a378)
INDJWSW01-2104#
.Jan 25 12:47:23: EAPOL pak dump Tx
.Jan 25 12:47:23: EAPOL Version: 0x3 type: 0x0 length: 0x0005
.Jan 25 12:47:23: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
.Jan 25 12:47:23: dot1x-packet(Fa3/0/13): EAPOL packet sent to client 0x5600009F (0019.f302.a378)
INDJWSW01-2104#
.Jan 25 12:47:25: EAPOL pak dump Tx
.Jan 25 12:47:25: EAPOL Version: 0x3 type: 0x0 length: 0x0005
.Jan 25 12:47:25: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
.Jan 25 12:47:25: dot1x-packet(Fa3/0/13): EAPOL packet sent to client 0x5600009F (0019.f302.a378)
INDJWSW01-2104#
.Jan 25 12:47:27: %DOT1X-5-FAIL: Authentication failed for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
.Jan 25 12:47:27: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
.Jan 25 12:47:27: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
INDJWSW01-2104#
.Jan 25 12:47:27: %AUTHMGR-5-START: Starting 'mab' for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
.Jan 25 12:47:28: %MAB-5-FAIL: Authentication failed for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
.Jan 25 12:47:28: %AUTHMGR-7-RESULT: Authentication result 'fail' from 'mab' for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
.Jan 25 12:47:28: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
.Jan 25 12:47:28: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (0019.f302.a378) on Interface Fa3/0/13 AuditSessionID 0A8F7325000010629B960A41
Then the message will repeat and repeat forever... It seems that the switch Tx the packets first... Any ideas???
Thanks! -
How to turn off cellular data for exchange mail iphone 4 running on ios 7.1.1
Hello,
I am new to using iphone 4. I am able to turn off cellular data for most of my apps. But unable to find an option to turn off celullar data for exchange emails.
Is this possible? please help.
For now I am using the fetch method instead of push.What's not there on the 4S is the ability to specifically disable 3G data. You can disable all cellular data. Turning off 3G did NOT turn off cellular data. It just shut off 3G. You would still be connected to the EDGE data network if present.
Maybe you are looking for
-
HP DJ1510 AIO Printer-CAN SCAN BUT NOT PRINT
I installed SW & HW as per HP instructions on my comp (WinXP-SP2). Scanning worked but cannot print as the printer driver (which may be missing or faulty on the CD and also in installation files downloaded from HP web site) does not get installed. HP
-
Restoring Photos from Time Machine Crashes iPhoto
I am attempting to restore some photos to iPhoto from Time Machine. I can navigate back to the time where the photos are displayed, but when I click on 'Restore' the restoration process commences but then iPhoto crashes. When iPhoto is re-opened th
-
Stopping the applications main window from activating when a child window is clicked
I am building a javascript based AIR application that implements a bastardized growl notifier. When the the application is minimized or in the background you may be notified of a new message. This part works great. The UI calls for an "X" button to
-
Bluetooth OPP Help - Samsung A640 Phone
Hey everyone. I recently bought a phone from sprint, a Samsung A640, which is a bluetooth phone. I even more recently got an iMac, which also has bluetooth. Now, when I try and sync the phone with the computer(namely my address book), something odd h
-
Workflow PR-Next level pop-up for release
Dear All, I am working on PR release through workflow, with three level release codes. I need your help in setting:- Example: In case PR received through workflow at 1st level for release code Z1, and if he could not able to release it within 5 Min,