How To Stop "Ploarization" on the HPZ3100 44inch Printer

I am experiecing a sense of "ploariztion" thats what everyone keeps saying on some printed detail on my printer has anyone got any ideas on how to fix this problem
Cheers
Red

Similar Messages

How to STOP and START the BO EXPLORER/POLESTAR - LINUX

Dear friends,
Could you please let me know on How to STOP and START the BO EXPLORER/POLESTAR on LINUX platform?
Thank you,
Nikee

Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards,

How to Stop and restart the midtier?

Hello All,
I have installed Oracle AS (Infraturcture & middle tier , BI & Forms) on same Linux box.i.e: Oracle As 10.1.2.0.2 (Rel 2, x86 for Linux), SLES 9
Here is my question:
How to Stop and restart the midtier?
Regards,
DN

biforms.sh
export ORACLE_HOME=/opt/oracle/biforms
export OH=$ORACLE_HOME
export PATH=$OH/bin:$OH/opmn/bin:/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/bin
export ORACLE_SID=ORCL
export LD_LIBRARY_PATH=$OH/lib:/usr/openwin/lib:/usr/dt/lib:/usr/lib:/tools/lib
infra.sh
export ORACLE_HOME=/opt/oracle/infra <-- or correct one!
export OH=$ORACLE_HOME
export PATH=$OH/bin:$OH/opmn/bin:/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/java/bin
export ORACLE_SID=ORCL
export LD_LIBRARY_PATH=$OH/lib:/usr/openwin/lib:/usr/dt/lib:/usr/lib:/tools/libAs you see, only the first row differs from these two scrips. Because I'm lazy, I usualy set export OH. Under certain circumstances you might want to add DISPLAY to biforms.sh. Set it to localhost:0 or whatever is correct.
Martin

How to Stop and restart the OC4J_BI_FORMS?

I have Oracle AS 10.1.2.0.2 (Rel 2) installed. (Infratsructure & BI & Forms) on same computer.
my question is :
How to Stop and restart the OC4J_BI_FORMS?
Regards,
DN

Just as any other OC4J:
opmnctl stopproc -process-type=OC4J_BI_FORMS
opmnctl startproc -process-type=OC4J_BI_FORMS
or
opmnctl restartproc -process-type=OC4J_BI_FORMS
cu
Andreas

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock

HT204389 Can any tell me how i stop siri sayin the words i am typing when typing a message??

Can any tell me how i stop siri sayin the words i am typing when typing a message??

Hellooo Frndz....:) i have to use UISplitviewController.and I want to do add UISplitViewController To UINavigationController but problem is that i can't do this...:( i use MGSplitViewController Bt I Dont know Perfectly Use Of MGSplitViewController...
so , plz give me answer for how to add UISplitViewController to UINavigationController ???
--THNKS>>

How to stop to display the main report page header in the subreport!

Hello all,
I have an existed report that display the CR page header on every page of the report. Now I added another subreport into report footer without using link. How do I stop to display the main report page header and display the subreport in the new page with subreport header only? I really appreciate your time to help me out on this issue. Thanks.

Hi,
I tried to supress the page header with (onlastrecord and TotalpageCount > 1) condition, but the last page of main report without page header. I still like the page header display on last record, but not on the subreport only. How do I get it? Thanks in advance.

How to stop "FROM AROUND THE WEB" and "You May Like" from coming up on each page that I browse

It is very frustrating when I am on Mozilla looking at various websites and on each page that I go to either "FROM AROUND THE WEB" or "You May Like" come up in the middle of the page with links to other websites that I am not interested in viewing.
Also when I am shopping on the internet another pop up called Deals, brought by iWebar keeps popping up and also "Deals" by Deal Finder. I did not change any of my settings, I only updated Mozilla Firefox and then all of these things started happening. This is very frustrating and I want to know how to turn this off. I did not sign up for any of these things, and want to be advised on how to remove them.
Could you please advise how to stop these as I really do not want these options as I am browsing and I will go back to Internet Explorer if this continues to happen. I look forward to hearing from you promptly. Thank you

Hi Kerri,
You should always pay attention when installing software because often, a software installer includes optional installs, such as this adware. Be very careful what you agree to install. 
Adware gets on your computer after you have installed a freeware software (video recording/streaming, download-managers or PDF creators) that had bundled into their installation this browser hijacker.
You can use the below steps to revert back to adware-less Firefox.
1) Reset Prefs
*Navigate to '''about:config''' in your Address Bar
*Press the "I'll be careful, I promise!" button to proceed
*Search for iWebar and reset all prefs that pull up by right clicking > Reset
2) Remove any programs that you don't recognize or remember installing from your Control Panel (Start > Control Panel > Uninstall a Program)
3) Remove any extensions that you don't recognize or remember installing from Firefox.
*(Press the menu button ([[Image:new fx menu]] > Add-ons > Extensions)
4) Download ADW Cleaner to wipe out any remnants of the adware.
*http://www.bleepingcomputer.com/download/adwcleaner/

How to STOP to create the Delivery in MV50AFZ1?? Is it SY-SUBRC??

hi,
how to STOP the delivery creation, if enconters the error message?
Message was edited by:
Srinivas

Trigger the SAP NOTE, by passing the cf_subrc value as 1
Message was edited by:
Srinivas

How to stop and resume the animations of nested movieclips

Hi
I have many nested movieclips in different positions of the main timeline.
I have 2 buttons, play_btn and pause_btn.
I'd like when the user click pause_btn, the animations on the main timeline and in nested movieclips stop.
Whe he click play_btn the animations resume in both the main timeline and nested movieclips.
I have created array of nested movieclips on the main timeline.
var arr:Array = new Array(mc1, mc2, mc3, mc4, mc5);
play_btn.addEventListener(MouseEvent.CLICK, on_play_btn);
pause_btn.addEventListener(MouseEvent.CLICK, on_pause_btn);
function on_play_btn(e:MouseEvent):void
 gotoAndPlay(currentFrame);
 for(var i:Number = 0; i < arr.length; i++)
 if(arr[i] != null)
 arr[i].play();
function on_pause_btn(e:MouseEvent):void
 gotoAndStop(currentFrame);
 for(var k:Number = 0; k < arr.length; k++)
 if(arr[k] != null)
 arr[k].stop();
but it only stops the animations on the main timeline and dosen't stop the animations in the nested movieclips.
Help me Please.

I'm having the same issue.I have a main timeline, which has nested movieclips with there own timelines and motion tweens. Using the new motion tween, and not the classic tween, which may or may not be the problem.
Was having a similar issue with stopping the timeline, the main timeline would stop, but the nested movieclips would keep going. Found this blog post that helped.
http://blog.nobien.net/2009/02/05/as3-stopping-all-timeline-animations/
Used the code below to stop everything by passing the stage as the displayObject. Worked great, but now i'm having the reverse issue. When I resume play, the nested movieclip timeline stays exactly where I stopped it, and the main timeline resumes play. If there are a 100 frames in the nested movieclip, once it reaches the 101st frame, the main timeline kicks in again.
function stopAllChildMovieClips(displayObject:DisplayObjectContainer):void{
 var numChildren:int = displayObject.numChildren;
 for (var i:int = 0; i < numChildren; i++) {
 var child:DisplayObject = displayObject.getChildAt(i);
 if (child is DisplayObjectContainer) {
 if (child is MovieClip) {
 MovieClip(child).stop();
 stopAllChildMovieClips(DisplayObjectContainer(child));

How To Stop Bridge Rebuilding the Cache Unnecessarily

The Problem
For me, this problem was manifest on a MacBook Pro with an external hard drive attached. The hard drive would be perpetually working and both it, and the laptop, would be getting extremely hot as a result.
Bridge would keep rebuilding the cache in folders to which the cache had been exported; and even when the contents had not been changed, nor the folder renamed and/or moved. There was, therefore, no reason for Bridge to rebuild the cache – but there it was churning away.
The solution
The solution is simple, once you have eliminated all the other possibilities (see below) – and that is to increase the Adobe Camera Raw cache to something substantial (between 10 and 20 GB). This will eliminate the endless rebuilding. This can be set in Camera Raw's Preferences.
Comments
I discovered this solution on the Lightroom Forum, from users who were complaining of Lightroom being slow. The explanation is that Lightroom derives its preview images from the Camera Raw cache. Clearly this is also true for Bridge. If the cache is too small it may be that the preview images have been deleted to make way for other more recent ones and so it will have to 'rebuild' the cache deleting earlier preview images, thus producing an endless re-cycle of rebuilding – again and again.
The deriving of preview images from Camera Raw's cache seems also to be confirmed by the behaviour of Bridge should Camera Raw be engaged on another task. If this is the case, I have found that when using Bridge to view images it will start to rebuild its cache until Camera Raw is freed-up and then it will stop (having found the preview images it needs).
Other Possibilities
The above solution comes with the caveat that Bridge's cache is not corrupted; and that in Bridge's Preferences ‘Automatically Export to Folders Where Possible’ has been selected, and the cache items have been set to maximum (Bridge Preferences > Cache). If using an external drive the drive preferences should be set so that it does not sleep.
I hope this helps other who have struggled with this problem. $35 please, Adobe.

For those interested in the Camera Raw Cache here is a link http://forums.adobe.com/message/3315333
From what is said in the link it does not follow that it will reduce rebuilding the general cache as it is only cacheing raw image data, but if it works who am I to say what is going on.

How do I un-install the Universal Crossword Print Widget?

The Universal Crossword Print Widget has been discontinued, and there will be no new content. However, you can still receive the Universal Crossword printable by subscribing on your HP web-enabled printer’s front panel, or by visiting HPConnected.com (in the U.S.) or ePrintCenter.com (elsewhere). Note: You will need an HP printer to subscribe.
Here’s how to uninstall the Print Widget:
In Windows 7:
Click the Windows button .
Click Control Panel.
If View By is set to Category, click Uninstall a Program under Programs (otherwise, click Programs and Features).
Select the Universal Crossword widget.
Click Uninstall.
Universal Crossword Print Widget (c) 2011 Universal Uclick. All Rights Reserved.
I work on HP's behalf.

Hi Mary56,
If it is on your printer, it is not the widget, but a printer app. If it is on your computer, you have to uninstall the program (see directions at the top of this thread).
I will send a note to Jaime, who helps with printer apps and he will get back to you if this is a printer app. If it is, it will help if you tell us the printer model number.
Or, perhaps you can fix it yourself by checking out the instructions on this link:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/how-to-cancel-automa...
Best of luck,
Mary
{I work on HP's behalf}

How do I set up The Lorax Daily Print Activities?

The steps are pretty simple:
Open The Lorax Daily Print Activities. The application should open as soon as installation is complete. You can also open the program by clicking your desktop icon, or by clicking Start, then All Programs, then the name of the particular application.
To set up the application to print, follow these steps:
(1) Select each of the days when you want prints.
(2) Select the time of day when you want your prints (these are in hourly slots).
(3) Select your printer from the list (PDF and XPS writers are not supported). .
(4) Don’t forget to click Save when you’re through!
You can also click the wrench icon () to open the Settings dialog, where you can:
(1) Turn Scheduled Printing On or Off (you might want to turn scheduled printing Off when you go on vacation, for instance).
(2) Set the desired action for when a scheduled print is missed. If you want the item to print immediately when you log in, select Automatically. If you want to be asked before an item is printed, select When Prompted. If you just want to skip missed items, select Never.
(3) Click Save in the Settings dialog to save your changes.
Don’t forget that on the days and times you’ve selected, your printer must be turned on, have paper, and be connected to your computer, and your computer must be on and connected to the Internet. Happy printing!
Did this answer your question? If it did, why not click the Kudos! button to the left?
If it didn’t answer your question about a printing problem, click Reply to ask the community, or search the forum for other posts that might help.
Or click here to go back to the Guide to Printing The Lorax Daily Print Activities.
The Lorax Daily Print Activities (c) 2012 Universal Studios. All Rights Reserved.
I work on HP's behalf.

Can The Lorax Daily Print Activities be used on a MAC?

How to stop report updating the records

Morning all,
I have created a report which calculates reworked jobs according to a group (reason code). I later on added a sub report which calculates all the jobs (that is all the processed jobs). The sub report is linked with main report by Reason code.
Reason Code 1 to 99 in main report is linked with the reason code 1 to 99 in the sub report.
There are 9 specified reason codes. for example
Customer care - 1-99 reason code - This reason code total processed orders value is the same as Supplier.
Lab Surfacing - 200-299 reason code -
Lab Tinting - 400-499 reason code -
Hard Coating - 800-899 reason code -
Supplier etc. - 900-99 reason code - This reason code total processed orders value is the same as CstCare.
When the report runs, it calculates the value of the first group 1-99, sub report counts the total processed orders and displays the value (upto here it is fine). As the report goes on reading records, it updates the values and shows an updated value in some groups which needs to be the same as the first group value.
For example
If Customer Care had 470 processed orders, by the time it reaches Supplier it shows 507 processed orders, where as it should have kept it to 470 processed orders for Supplier group as both should have same value of orders processed.
The report is running fine however the records which are being pulled from the sub report gets updated by the time report finish counting all the records.
The main reason why it is doing is because it starts recounting on each group reason code. So when it sets off from reason code 1 to 99, it calculates all the records and then filters them to get 1 to 99 reason code records. Then when it comes to 100-199 group it starts recounting again all the records. The process kept itself until it stops matching reason codes between two reports.
Any ideas how to process all the records at once from the sub report? so that each time it looks for the record, it just picks what has been processed?
I suspect instead of keeping it on the group level I should move the sub reports on the header of the main report?
Any ideas will be welcomed.
Regards
Jehanzeb

Hi J,
This is not possible in Crystal, as you are well aware that when it is processing a group in the report, it will process that particular group objects like sub totals, group totals, sub reports etc. You can't pull all information (sub report) at once and show in bits and pieces.
You may have to create an intermediate database and replicate the data from your main database in certain intervals. It will help you to prevent different count in groups.
Thanks,
Sastry

How to stop poping up the Adobe Flash Player tip?

I have installed the flash player 10,but the need of flex builder 3 is flash player 9. So when I run the application the following dialog always jump out.How can I stop it? Thanks for your attention and answers.

Hi UtahDano,
Can you tell me where you saw '2013'? I looked on Adobe Flash Player Distribution | Adobe, Adobe - Adobe Runtimes / Reader Distribution License Agreement, and Adobe Runtimes / Reader Distribution Agreement, and I'm not seeing '2013'. Once I find out exactly where this is at, I can forward it to the appropriate folks to update.
Thank you.
Maria

How To Stop "Ploarization" on the HPZ3100 44inch Printer

Similar Messages

Maybe you are looking for