How to stop portlets from disappearing when invoked?

Hi,
I have a portal Application that contains 2 portlets from WSRP procuder.
These portlets have IPC through a parameter.
The first portlet is an LOV of client list, and the second portlet is a financial situation which takes the client as parameter.
In my Portal Application, when I choose a client and click the button both portlets disappear and then reapper when the second portlet is refreshed with new data.
How can i stop the first portlet from disappearing and reappearing when invoked.
Thank you in advance
Emile

Hello:
Try rebuilding the library. 
http://support.apple.com/kb/HT2638
Barry

Similar Messages

  • How to stop iphone from autoplay when plug into car audio system usb?

    how to stop iphone from autoplaying when connected to your car audio USB ?

    You need to remove the association that Windows has with that particular file type. To do that, you need to open Windows Explorer. From there, click on Tools, then Folder options. Click on the tab that is named file types. You then need to find the extension for the photos that appear in the iPhone, then click that registered file type. Once you do that, there is a section to select the program to open that file type with. You can click on the change button, and that will allow you to change the program that it opens with, or restore the default. There is also a box that can be checked to always use the selected program. If you unselect it, it will prompt you next time on what program to use.
    Hope this helps.

  • HELP - How to stop audio from starting when captivate loads

    Hi there,
    I'm trying to work out how to stop my audio files attached to objects (images) from playing when captivate initially loads.  I have a number of images with audio and when captivate initially loads all of the audios play at once which isn't good.  I only want the audio associated with the object to play when the user clicks the item.   
    I've been researching for days and can't find an answer.  Am I doing something wrong, or am I overlooking something.? 
    Could someone PLEASE help me with this or at least put me in the right direction.  Any suggestions will be appreciated!!!
    Jasmin 

    To achieve that you have to separate the audio from the image. The principle I explained in this article http://lilybiri.posterous.com/audio-objects-control-them
    The audio will play when the object to which it is attached gets visible. If you attach the audio to another object like a non-visible highlight box (that is my 'audio object' but you can use also a non-visible drawing object), you can set this 'audio object' to invisible in its Properties panel. When the user clicks on the click box, execute the action 'Show audio object' and the audio will play. I would even recommend using advanced standard actions over a simple action because you will be able to hide the other audio objects at the same time, and the play head will not be released - see video http://www.youtube.com/watch?v=M3nKi-DB6Fw&feature=plcp
    You have to know that hiding an audio object, will pause the audio. If you show it again, it will continue playing, not restart.
    Lilybiri

  • How to keep files from disappearing when using Dynamic link to AE in PremProCS4?

    I am at my wits end here and hope someone can offer a solution.  I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects.  I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead.  Here are the steps I do as per the Adobe Classroom in a Book Explains:
    I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
    I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
    I then right click the "clip" and select "Replace With After Effects Comp"
    I then name the new file.  name or whatever.aep
    It opens in AE
    I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
    As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key.  This does not work since I only get a yellow bar above the clip instead of a red on???
    So then I save the PremPro project and close it then go to the AE project, save and close it.
    When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
    I have tried many different ways to do this process including re-importing the .MTS file.
    I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project.  Once AE is closed it looses the file.  On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well.  I never change the names so this isn't this reason.
    Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
    Thanks  Kate

    Hi Curt, and thank you for taking the time to respond.
    Its odd how I've been trying to figure this one out for a long time and I tried your suggestion but it didn't make any difference..darn.
    In the AE forum they say this is quite common and no one really knows why...double darn.
    So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
    So far I figured it out... I guess I just needed to ask the question and write it all out to help get my brain working in the right direction: 
    Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
    In PremPro select the desired clip you wish to place effects on
    Rename it and save
    R click and "Replace with AE composition"
    Name new file
    You will see three files pop up in AE in the project panel.
    The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
    Highlight this file with a click and then go Ctrl H (for PCs)
    The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
    The source file icon in AE will change to an icon that denotes the true file...save
    Go to your still open Ppro project and make sure it carried the effects over..save.
    Now you can save and close the AE project.
    So for this works for me today and I hope this helps anyone else dealing with a similar issue.
    Thanks.

  • How to Stop Quicktime from Opening when Downloading a Song?

    I'm trying to download a song from an artists website. When I click on the song, a new window opens and quicktime starts to buffer the song for playback. This happens with both IE and Firefox.
    How do I disable this? My laptop doesn't do this, but my main desktop is.

    Why not just right-click and save the linked file to your computer?
    Open the .mp3 with any app you choose.
    You can disable the QuickTime plug-in from playing .mp3 files in a browser window by opening the QT Control Panel/Advanced and click the MIME Settings button. Remove the check mark for the .mp3 format and restart your browser for this change to take effect.

  • How to stop header from displaying when hovering over mail photos

    Hi
    This is an annoying behaviour to say the least. In MacMail when I move my cursor over an imbedded photo in a message the full header for the photo that is a link shows up almost blocking the photo. I can understand that the cursor would turn into a hand but there must be a way to stop the full address of the photo link? from displaying.
    Anyone?

    E. Michael Brandt wrote:
    Screen readers whould still read the alt attribute despite the presence of a title attribute.  In fact most apparently do not read the Title on an image:
    http://www.paciellogroup.com/resources/articles/WE05/forms.html
    As always some Screen Reader users can reconfigure the software:
    http://www.isolani.co.uk/blog/access/ConfiguringLinksInScreenReaders
    So in general I think you are safe doing this, but perhaps others can weigh in here.
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia
    Thanks very much,
    I saw several scripts where Javascript were used.
    But your solution is very simple and it works perfectly in IE7, don't know if it works in IE 8.
    Thanks again,
    Patrick

  • How to keep files from disappearing when using Dynamic link to AE from PremProCS4?

    I am at my wits end here and hope someone can offer a solution.  I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects.  I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead.  Here are the steps I do as per the Adobe Classroom in a Book Explains:
    I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
    I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
    I then right click the "clip" and select "Replace With After Effects Comp"
    I then name the new file.  name or whatever.aep
    It opens in AE
    I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
    As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key.  This does not work since I only get a yellow bar above the clip instead of a red on???
    So then I save the PremPro project and close it then go to the AE project, save and close it.
    When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
    I have tried many different ways to do this process including re-importing the .MTS file.
    I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project.  Once AE is closed it looses the file.  On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well.  I never change the names so this isn't this reason.
    Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
    Thanks  Kate

    Hi Mylenium, and thank you for taking the time to respond.
    Your idea of renaming comps got me to thinking..hmm.
    So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
    So far I figured it out... 
    Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
    In PremPro select the desired clip you wish to place effects on
    Rename it and save
    R click and "Replace with AE composition"
    Name new file
    You will see three files pop up in AE in the project panel.
    The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
    Highlight this file with a click and then go Ctrl H (for PCs)
    The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
    The source file icon in AE will change to an icon that denotes the true file...save
    Go to your still open Ppro project and make sure it carried the effects over..save.
    Now you can save and close the AE project.
    So for this works for me today and I hope this helps anyone else dealing with a similar issue.
    Thanks.

  • How to stop iTunes from launching when iPhone is connected?

    I have the "Disable automatic syncing for all iPhones and iPods" checked in my Windows version if iTunes. But when I try to charge my iPhone, it still comes up. Is there any way to disable this. Windows also detects a camera device. I do all my iPhone stuff at home on my Mac, but at work I have a PC and I want to be able to charge my phone using the USB cable. But I don't want iTunes to launch or the PC to detect the camera device. Any ideas or suggestions?
    Thanks

    SteveFLHTCI:
    Here's what I did using Windows Vista Home Premium. First, when I connected my iPhone, an AutoPlay dialog box popped up asking me what I wanted to do. Towards the bottom, there was some blue text that stated "Set AutoPlay defaults in Control Panel" and I clicked on it. When the Control Panel AutoPlay applet opened up, I scrolled down towards the bottom and found a list of devices which included "Apple iPhone." From there, I selected "Take No Action" from the drop-down list and have lived happily ever after.
    Hope that helped. Good luck.

  • How to stop system from freezing when importing into iTunes (version 7)?

    Since I have installed iTunes 7, I have been unable to import music into iTunes; my computer freezes after about 10 seconds and the only thing I can do is restart the entire computer. It is extremely frustrating and I can't seem to find anyone who can help me with this issue...I'm affraid that I'm not extremely technical-savvy when it comes to these things, so any help or suggestions would be greatly appreciated!

    I've found quite a few people in these discussions with this problem and I had the same one myself.
    The only thing I could do (the startup disc I have was an earlier version of iTunes - I downloaded iTunes 7 from the net) is uninstall iTunes and then reinstall using the earlier disc and don't upgrade it. Unfortunately this means if you have any music in iTunes 7 you won't be able to use it.

  • How to stop iPhoto from launching when Kodak Photo CD is inserted...

    Hi-
    I do not what iPhoto to launch automatically when I insert a Kodak Photo CD. I looked for a preference to stop this, but could not find anything. Can anyone help?
    iPhoto 6.0.6
    Mac OS 10.4.9
    Thanks.

    Thanks for the quick reply...
    In the Image Capture General Preferences, I have "No Application" chosen to open when a camera is connected. This preferences, however, does not effect Kodak Photo CD's. iPhoto still launches.
    Carl.

  • GRRR!   How to stop itunes from opening when plugging in touch??

    the option "open itunes when the ipod this connected" is grayed out, on the Summary screen, in itunes. I've googled and others have had this same issue with NO ANSWER.
    EDIT: s c r e w it. I got took ituneshelper out of startup, using msconfig. it shouldn't require these kinds of workarounds!

    Image Capture only has an import into option.  There is no option to select what happens when a specific device is plugged into the computer.
    The settings in Image Capture are specific for each of your iPhone, iPads, cameras.
    Plug in each of your iOS devices. Select it in the devices list.
    The set "Connecting this iPhone/iPad/Camera   opens" and set it to "No application".

  • How to Stop window from resizing when loading a project

    Every time I load any project (even one I saved and closed 5 minutes ago) After Effects resizes the window.  I would like to disable this 'feature' how do I do that?

    Check your workspaces and also your graphics card stuff. Especially in a multi-screen setup your graphics driver may simply be resetting the application window to the primary/ first screen.
    Mylenium

  • How to stop page from resetting when using a laser barcode scanner to fill input areas.

    I am using Firefox 30 with Mac OS 10.9 at work. We keep track of workflow using a 3rd party website and scan the information in with a UBS laser barcode scanner.
    In Firefox the input regions will fill with the information, but then clear without saving or sending the information to the site. What settings are needed for Firefox to keep and send the scanned information?

    Just a WAG.
    Try the first item in Accessibility = Always use the cursor keys to navigate within page
    ''assuming that web app doesn't use the cursor keys for anything''
    Have you attempted to get support for that website or website app?
    Without more information all we can do is guess.
    It's been 10 years or so, but I did play with the CueCat barcode scanner a bit and even modified some software that I found on a CueCat enthusiast website to do silly things and to re-purpose it to keep an inventory of my CD collection. ''(Yep, that long ago.)''
    The CueCat it was sending keyboard commands, which wasn't hard to figure out, because it piggy-backed on the PS/2 keyboard cable; there were a very small number of USB versions made for retail store kiosks and for demo purposes, but the whole project was killed before they started making the USB for consumers.

  • TS4002 stop email from deletion when deleted on another device

    how to stop email from deletion when deleted on another device.

    With IMAP - the email protocol the iCloud uses - the messages live on the server and are read from there by your devices. Think of it as being like webmail and it makes sense. Therefore when your wife deletes a message she is actually deleting it from the server, which is why you see it as deleted. You can't alter this; it's inherent in the system.
    The only workaround is to sort out a method whereby emails don't get deleted until both of you have seen them - for example she could move them to another folder and you could then read them there and delete them (so their presence in that folder always means that the other person has seen them).

  • I have an Iphone 4S, when I am on the phone and I get a new message my phone vibrates and rings. How can I stop this from happening when I am on the phone

    I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone

    Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.

Maybe you are looking for