How to stop rate conforming

I know i've asked this question a few times already but i never get an answer and my post get swamped by other posts
I was finished with my project and I noticed the video didnt look so good..so I highlighted all my clips, Went to Inspector and changed the rate conform Frame sampling from flooring to Optical Flow...Me changing it to optical flow was a big mistake..ive been trying for a week now to try and cancel the optimal flow..
I've tried canceling it in background task ( once it cancels it goes right back to trying to make it optical flow )..i;ve tried analyzing and fixing all the events..The Optical Flow makes a file too big to fit on my HD....So I guess the only thing I can think of is buying an external HD and let it become 300 gigs on there...i've tried uninstalling, deleting the render files...nothing...It seems FCP is driven to make my video in optical flow...No matter even if I tried changing it back to flooring ( which it is now ) it still tries to analyze for optical flow...anyone else have any ideas?

There doesn't appear to be a way to turn off that feature. Why do you need to? Perhaps if you explain, someone can offer an alternative suggestion.

Similar Messages

How to stop specific query attached with other query in same process using With method

Would it be possible to stop one query out of two queries attached to single process...because i see it is returning one IDisposable inteface...if i call dispose() method...two queries are stopped/killed...
So how to stop specific query which is combined with other queries in a same process at runtime i.e., attach or detach kind of thing?
Thanks in advance
Satish

Yes, the overloading of the term "Process" can be confusing. In SI, depending on your edition of StreamInsight, a process can run on one or more threads from a pool of threads and are scheduled together. Don't think of a process necessarily as a single
thread or multiple processes as a method of multi-threading.
As for a limit on the number of queries, there isn't a hard limit that I'm aware of. However, there will be a practical limit that will vary based on the complexity of the query, the event rate and your hardware (# of cores). If you are using Standard Edition,
this limit is much smaller as you only have a single scheduler thread. With Premium Edition, you have a scheduler thread for each core on the machine so you can get higher throughput and lower latency. But if you have, say, 4 cores on the machine (don't count
hyperthreaded cores, just real cores), 100 queries and a target throughput of 100K events/second, you'll likely have some problems. At 1K events/sec, you'd likely be fine though. With 32 cores and Premium Edition, you'd probably be OK with 100K events/sec.
So ... like I said, it depends.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

How to STOP syncing with Outlook via GPRS?

I use an unlocked iPhone 3G with a prepaid mobile card.
Everytime I open my Calendar function on the iPhone (just to see the days and dates) the iPhone attempts to sync over the air with my Outlook account calendar via GPRS.
This costs a bomb on the prepaid card, and I want to stop the sync function.
Would someone kindly tell me how to STOP the iPhone from syncing with my Outlook Calendar?

If calendar events are synced over the air, this means you are accessing an Exchange account or a MobileMe account.
If you don't want to sync calendar events over the air with the account, you need to turn Calendars off for over the air syncing for the account preferences on your iPhone. This will erase all calendars and calendar events from your iPhone and you will need to sync direct with a supported application on your computer via the iTunes sync process. If an Exchange account with Outlook on a Winblows PeeCee, this will not be possible.

How to stop syncing the photos only on facebook

how to stop syncing the photos only on facebook

corg2333 wrote:
yeaa but it is not only on facebook i think..
Disable the automatic spell checking service in your browser.
Safari
--> Edit --> spelling and grammar --> uncheck "check while typing"
Firefox
http://support.mozilla.com/de/questions/500215

How to stop voice control

how to stop voice control?

Hi Joannewpark,
Press your Home Button to get to the Home Screen.
Press Settings, then press again 2x fast - you will go to the Settings screen
Press on General, then press again 2x fast - you will go to the General screen
Use 2 fingers to indicate scroll up - Voice Over will begin to read the items on the screen, and will eventually get to the Accessibility option. When it says "Accessibility" press on it, then press on it 2x fast
It will go to the Accessibility screen, tap on the Voice Over option one, and then again 2x fast, now tap on the Voice Over option again, and then double tap to turn it off.
Cheers,
GB

How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save. I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was. I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink." That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box. But as soon as I save (command S), the text box reverts to a hyperlink.
If I don't click save and move around the pages, it does not revert to a hyperlink. It only reverts to a hyperlink when the file is saved. Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
The website page is: http://www.usronline.net/USR/VedicResearch.html. If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file. This should not be, but I can't get this hyperlink to go away for good.
Many thanks in advance.
Vishnupriya

Please pardon the reply delay--a big project deadline had to be met. Now back to this work:
Yes, the text in the oval object had a drop shadow (the oval object itself did not). I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object. I deleted the text and then the image file icon disappeared. But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again. I deleted the oval object entirely and simply typed the text inside the main text box itself. The image file icon that was attached to that oval object is gone (along with the oval object).
Still the image file icon is attached to the main text box, though. I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink.
Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one). Still in the new text box with the pasted text, the image file icon shows in the upper right corner.
I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond." I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
Thank you.

In my macbook pro when composing email it coping into thrash as well so how to stop this ?

in my macbook pro when composing email it coping into thrash as well so how to stop this ?

You may have a Bad fan. Make an appointment and take it to the genius bar for an evaluation. It's free, in warranty or out.

Can't figure out how to stop my MBP from opening programs at startup, namely word and messages

Recenty my MBPro has started opening MS Word and Messages at startup and I can't figure out how to stop it? I've tried selecting and de-selcting the startup option from the dock but this doesn't help. Does anyone have any suggestions?

System Preferences has a setting for this.
In the Users & Groups section you will fine a "Login Items" header. This is a list of all the programs that will open automatically when you log in. You can select any program and click the [--] button below that window to stop the program from opening automatically.

How to stop iTunes creating a new library on my hard drive when it can't find the one I have created and told it to use on an external drive?

I have quite alot of music etc so to save hard drive space I have created my iTunes library on an external hard drive. If I ever accidentaly open iTunes when that external hard drive isn't attached iTunes makes a whole new library from scratch on my computers hard drive. I find this highly frustrating as I often open Itunes to find no music as it have changed librarys and I have to re-load my actual library: very frustraiting and time consuming.
I would like to know if it is possible to lock iTunes some how to stop it from changing folders when it can'f find the library, or atleast give me a warning that it can't find the library before creating a whole new one????

Tunes works through a database file which has a list of your tracks. When you click on a track it looks up in the database which file it needs to play, then plays the file. If something breaks this link then you get ! The two main ways to get ! are to move a file from where iTunes expects it to be, or to delete it altogether. I don't know which has happened in your case. You can try using Spotlight to find a file for the one referred to in a broken link. If the files have been moved then they need to be moved back. If they were deleted completely you will have to restore them from a backup or download them again from the iTunes Store and rebuild your library.

How to stop multiple auto-switching to address bar every time I open a new tab and try to type something anywhere outside of address bar?

How to stop multiple auto-switching to address bar every time I open a new tab and try to type something anywhere outside of address bar? Like something just wants me to use that embedded search when u type something not-web-address in address bar and hit enter. And the most ridiculous thing is that it happens repeatedly on like every second, like I just move down from address bar and start typing again, but then again it switches me to address bar, and 3, 4 times like that. And the result is also that I can't see the address of that page.
I think its has something to do with my AVG antivirus, because this started the same time some AVG Nation started to appear in every new tab i open (and thats also irritating me, I read about it here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I dont want to lose all my settings) but when i type something in address bar and hit enter it opens the search results in Google.
Please try to help me, I like Firefox but I must switch to Chrome until I fix this problem.
Thanks in advance

First, please update to Firefox 32. 22 is no longer support nor is it secure. Then let us know if you still have this problem. [[Update Firefox to the latest version]]

How to stop the Flex application when user clicks on Cancel button from JS-confirm message?

Hi All,
I use the next code when a user clicks on a link:
private function clickHandler():void
      ExternalInterface.call('confirm', 'Of course you want to go to the Adobe forums!');
      navigateToURL(new URLRequest('http://forums.adobe.com'), '_self');
This will show up the javascript confimation box. But when the cancel-button is clicked, the user goes straightly to http://forums.adobe.com...
How to stop Flex performing the next code when a user clicks on the Cancel button?
Or, how to catch which button is clicked by a user in Flex?
Thanks!

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Difference between billing and invoice? How to stop PGI?

can u please help me in these questions.
Difference between billing and invoice? How to stop PGI?

Invoice is document indicating to delivery goods and Billing is a receipt of payment
Tables are VBRK & VBRP. For flow, go to transaction VF03, enter document number and hit 'Display Document Flow' button on toolbar
vbrk and vbrp holds billing/invoice details..
Billing Document:
Generic term for invoices, credit memos, debit memos, pro forma invoices and cancellation documents.
The tables are VBRK and VBRP.
2)-- once u do PGI the delivery document will be created . there is no way to stop it .. the thing u can to do go to the list of created deliveries in VL09.. select the delivery doc which u created.there u have the option of reversing the goods or canceling it.
let me know if i am wrong...
thanks,
madhan
Message was edited by:
madhan n

I have itunes set up to sync with my Ipod Touch and my Ipad. As of today, it keeps looking for an iPhone to sync with and give me an error message. I don't have an iPhone and don't know how to stop it from popping open with this error message.

I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

How to stop email and sms messages from previewing on my iphone 6 screen

How to stop messages from previewing on my iphone 6 screen for others to see?

Setting App > Notifications > Mail > Change the alert style to None (Then repeat for Messages).

How to stop rate conforming

Similar Messages

Maybe you are looking for