How to stop SWUD processing

Hi All
Kindly help me in solving following 2 issues.
Issue 1
In the transaction SWUD , I have started "Switch On Container Moniter" , because of this while I am doing my normal transctions (Release of Purchase Requesitoin ) ,mail is not getting triggered to the next level but when I am doing the test run in SWUD , mail is getting triggered to the next level , I want to Switch Off Container Moniter , pls guide me how to dat,so that mail should go to the next level without going to the transation SWUD , as it was happening Earlier.
Issue 2
(before Switching ON Container Monitor/going into Transaction SWUD)
In my PR release Scenario , It has 3 level of release ,but the mail is going upto 2 level ,but from the level 2 to level 3 , mail is not getting triggered
I have used the Rule where the binding for the rule is
WORKFLOW                                                         RULE TO FIND AGENT
&PURCHASEREQUISITION.NUMBER&                   &PURCHASEREQUISITION.NUMBER&
and binding for the task is
WORKFLOW                                                         STEP 'OVERALL RELEASE OF Pur Req
&RELEASECODE&                       ->                            &RELEASECODE&
&PURCHASEREQUISITION&          ->                           &PURCHASEREQUISITION&
This mapping I got after doing the Auto Mapping , but In my rule nowhere I am I am using Release Code , but while doing the run thru SWUD , it is asking for Release Code , and once I give the Release Code there , mail is getting triggered to the 3rd level .
and
WORKFLOW                                     ->                    STEP 'OVERALL RELEASE OF Pur Req
&PURCHASEREQUISITION&                ->                       &_WI_OBJECT_ID&
Pls guide me on above 2 issues.
Rahul.

Hi,
I guess the binding between the rule container and workflow container is not done properly. I would like to know based on what inputs you are fetching the agent in your rule? For e.g; document type, plant etc.
If this is the case you need to create rule container in your rule. Try simulating it in PFAC.
Then bind the corresponding workflow container with your rule container. And bind the rule container RuleResult with a workflow container say agent. You need to create this workflow container manually with data type as BO AAGENT.
Let me know if you have any queries.
Regards,
Raj

Similar Messages

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to stop a process (that is executing)

Hi all
my question is How to stop a process that is executing ?
some other languages has a function called yield() in java how I can do it.
thanks

You can tell a Thread to yield - That is, cause the currently executing thread object to temporarily pause and allow other threads to execute.

How to stop a process in process chain

Can anyboday help , How to stop a process in process chain .
Thanks
PP

Hi Phani
In RSPC, Open the Meta Chain, In Process Chain Manu bar,
Select the option "Remove From Schedule"
Hope this will help you
Regards
Saravanan.ar

How to stop a process chain when its running?

Dear Experts,
How to stop a process chain when its running? is it that a chain can be stoppend when we open an info package of that chain ?
Thank you,
Raj

Hi,
Goto the main menu process chain --> choose the remove from the Schudule...
Regards
sathis
I hope it helps to u... please assign the points

How to Stop the process chain if it in the middle of the process?

Hi,
Is there anyway that i can stop the process chain if it is in the middle of the process already?
Raj

"Hi,
First and foremost let me advice you to be very careful while doing this.
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Different Ways to stop process chain
1)SM37 -->Kill Job
2)SM50/sm66- ->Kill process
3)RSPC>Job Log>Make the process RED forecefully.
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical)
Steps 1 -3 stops the chain running in process
Steps 4-5 stops the chain AFTER the current job which is running is completed as sucessful or Failure by nature.
Rationale - 4-5
This function will only remove the jobs from schedule, which did not yet run. It will not kill running jobs, as this may leave the system in an inconsistent state, moreover killing processes is possible for synchronous processes only anyhow. This means, that there will be no errors with interrupted chains, which on the other
hand means an interrupted chain is not restartable. So for a running chain this function is intended to be an emergency break only. You can use it, however, to remove a scheduled chain from schedule, such that it does not start except by your product.
Re: Kill a Job
Re: Killing a process chain.
How to stop a process in a process chain?
Regards,
JituK

How to stop/cancel Process Chain in BI 7.0

Hi,
Could you tell me how to stop/cancel a process chain that hangs with status yellow or green in BI 7.0? There was an easy option to do it in 3.x, but I cannot find a similar option in 7.0.
What happens is that at random our process chains hang at a certain variant with either yellow or even green status and do not proceed further. What happens is that in a couple of hours another pchain run occurs and it executes fine. Then again at random (might be the same day or the next day) the process chain hangs again. I think that all those "hanged" pchains pile up in the queue, so that it cause other future pchains to hang as well at some point. So, is there anyway to stop/cancel these zombie process chains when it stops at a particular event RSPROCESS in BI 7?
Thank you,
AG
Message was edited by:
AG

Hi Frank,
Thanks for your reply. I have a few questions.
1)SM37 -->Kill Job
We cannot do that because the job has already finished.
2)SM50/sm66- ->Kill process
There are no hanged processes to kill
3)RSPC>Job Log>Make the process RED forecefully
How do you do that exactly?
4)RSPC>Process chain> main Menu"Remove from Scheduling" OR
5)se37-->RSPC_API_CHAIN_INTERRUPT
give RFC BW system name(technical) and process chain name(technical) - we can do this, but what exactly would it accomplish. Would it remove the process chain from any runs in the future or also any hanged ones in the past? An how is this step different from #4?
Thank you,
AG

How to stop a process?

last time i selected all the files in a folder and expected them to open in one Preview window, but each opened a window and it took a long time. When this happens, how can i stop the process immediately?

Quit the application using CMD+Q. If that doesn't work, OPTION-click the app's Dock icon, and select force quit.

How to stop a process in a process chain?

Hi
I've got a process chain that calls several processes. It's still running one of the processes but I want to stop the two that will run after (as it is now in the day time and they will impact on performance in our R3 system).
I've looked on SM37 but when I put in BI_* nothing comes up. Do anyone know how I can stop these processes from running before they start ?
Thanks in advance
Sandra

Hi Sandra,
Just goto the process types that are supposed to run afterwards... and rt click select released job-> select the job and press shift + F6 (from scheduled state to release state)
If u observe in PC now after refreshing this step will not be green (grey meaning not scheduled to run)
similar for other.
thanks

How to stop the Process Chains?

Hi Everyone,
   I have a process chian which is running daily, but i want to stop in a particular day( for ex on wednesday).The process chain has to run on remaining days.So how can i stop the process chain on the particular day. Please do answer me.
Thanks
Veerendra

Hi Virendra,
After start process , insert a node of abap program and insert program with following code .
Report zntest.
data : lt_attr like CASDAYATTr occurs 0 with header line.
CALL FUNCTION 'DAY_ATTRIBUTES_GET'
EXPORTING
   DATE_FROM                        = SY-DATUM
   LANGUAGE                         = SY-LANGU
TABLES
    DAY_ATTRIBUTES                   = Lt_ATTr.
write : / lt_Attr-WEEKDAY_L.
read table lt_attr index 1.
if lt_Attr-WEEKDAY = '3' . "3 Stands for 3rd day of week i.e. Wednesday
message 'Process chains not to be run on wednesday' type 'E'.
endif.
Make sure that this ABAP program is linked to other processes only on "Success",
Hope that helps.
Regards
Mr Kapadia

How to stop the process chain on every saturday and delay until sunday 6 am

Hi experts,
We have a maintanence window on every saturday until 6 am on sunday.
My question: I don't see any option in the start variant of the process chain under restriction to stop the process chain on saturday and delay the run until sunday 6 am. Any idea?
Please let me know the steps. Thank you in advance.
Sharat.

how to create a event for a process chain? please let me know step by step instructions.
Also I will schedule the regular process chain until friday and use the new variant to schedule it on sunday at 6:00 pm right?
Thanks in advance.
Sharat.

How to stop the process chain

Hi Sapients,
I am loading the data from R/3 to BW through Process chain. Please let me know how to stop execution of the process chain.
Thanks
Mahi.

Hi Mahendra,
You have to stop the load in the source system if u r loading from R/3 System, for that use transaction SM50 or SM51 to kill the process.
Hope it helps. Assign points if helpful
Cheers
Raj

How to stop threads, process, streams when closing a (internal) JFrame?

Dear all,
I read a Javaworld article about Runtime.exec(), which will output the process outputs and error outputs to either a file or System.out. Now I want to practice it by outputing the process output/error to a Swing JTextArea. It works fine if the process ends successfully.
My problem is that I want to stop all the output threads and clear all the streams when user click close JFrame button before the process finished. The code is shown below. Note that this frame is poped up by a click from another main frame. ( it is not exiting the main Swing application). This happened when I want to kill a process when it is running.
I tried to implements a WindowListener and add
public void windowClosing(WindowEvent e) to the JFrame.
Inside this method I used process.destroy() and errorGobbler = null, outputGobbler = null, or outputGobbler.interrupt(), errorGobbler.interrupt(). But all these seems does not work. Sometimes thread was not stopped, sometimes process was not destroyed (because the stream was still print out something), sometimes the error stream was not successfully closed - by printing out interruptted by user error message.
How can I make sure all the underlying streams and threads, including the PrintStream in StreamGobbler class are closed?
Again this Frame could be a Dialog or InternalFrame, i.e, when I close the frame, the main frame does not exit!
import java.util.*;
import java.io.*;
class StreamGobbler extends Thread
    InputStream is;
    String type;
    OutputStream os;
    StreamGobbler(InputStream is, String type, JTextArea out)
        this(is, type, null, out);
    StreamGobbler(InputStream is, String type, OutputStream redirect, JTextArea out)
        this.is = is;
        this.type = type;
        this.os = redirect;
    public void run()
        try
            PrintWriter pw = null;
            if (os != null)
                pw = new PrintWriter(os);
            InputStreamReader isr = new InputStreamReader(is);
            BufferedReader br = new BufferedReader(isr);
            String line=null;
            while ( (line = br.readLine()) != null)
                if (pw != null)
                    pw.println(line);
                out.append(type + ">" + line);
            if (pw != null)
                pw.flush();
        } catch (IOException ioe)
            ioe.printStackTrace();
public class Test extends JFrame
    private JTextArea output;
    private StreamGobbler outputGobbler;
    private StreamGobbler errorGobbler;
    public Test (String file)
        super();
        output = new JTextArea();
        try
            FileOutputStream fos = new FileOutputStream(file);
            Runtime rt = Runtime.getRuntime();
            Process proc = rt.exec("java jecho 'Hello World'");
            errorGobbler = new
                StreamGobbler(proc.getErrorStream(), "ERROR", out);
            outputGobbler = new
                StreamGobbler(proc.getInputStream(), "OUTPUT", fos, out);
            errorGobbler.start();
            outputGobbler.start();
            int exitVal = proc.waitFor();
            output.append("ExitValue: " + exitVal);
            fos.flush();
            fos.close();
        } catch (Throwable t)
            t.printStackTrace();
     setSize(400,400);
     show();
}Thanks !

Thread.interrupt() doesn't stop a thread. You'll have to read the API for more specifics. You could use something like interrupt to force interruption of the thread for the reason of checking the terminating case though. I believe you would want to use this in the case where operations can take a long time.
Setting your reference to the thread to be null won't stop the thread since it's running. You just lose your reference to it.
I believe once the thread stops running your streams will be closed, but possibly not cleanly. Someone who has more knowledge of threads might be able to answer this better, but I would generally say clean up after yourself especially if you are writting out data.

How to stop message processing based on validation?

Hello experts,
I have a requirement to stop message processing in the graphical mapping based on validation results. Here is the scenario - messages are translated using graphical mapping and sent to the target system. An RFC lookup will be done to ECC to determine if the data in the message is good. If the lookup returns a negative result, message processing should be stopped right there.
I guess we can throw an exception from the mapping to force a failure and stop further processing, but that will cause the message to show up as failed on SXMB_MONI and cause alert emails to be sent out in PROD. Another option will be to supress creation of the root node itself, but I think the message will then fail in the subsequent "call adapter" step if the target schema has a min occurence of 1 for the root node (as in the case of IDocs).
Is it possible to do it without using BPM?
Thanks,
Michelle

Hi Michelle,
If your requirement, to stop message processing without sending an alert?
If yes, then you can have a alert rule, not to trigger alerts on a failure (And to raise an exception based on the result from RFC loookup).
If your requirement is not to make the message fail, then you have to go for the ccBPM route.
Best Regards,
Ravikanth Talagana

How to stop SWUD processing

Similar Messages

Maybe you are looking for