How to STOP the action..

Hi, During searching something in IC WEB,
I Press on Search. now eggtimer comes up and goes on for sometime.
And during this time, i see no possibility to stop the session within IC WEB. if i want to stop i just have to close the Internet explorer and re login again.
is there any way to so have the action stopped within IC WEB?
BR,
Marry.

Sorry but there is no other way than to wait for processing to complete. Or else if you are using CRM 7.0 then you can use ctrl+N as a shortcut to open new browser that will directly take you to sap crm.
Hope that helps.
Regards,
Bhushan

Similar Messages

How to Stop the method Action When an Exception Occur in other Method

Hi All ,
public void action( Event clientEvent) {
startAction();
JOptionPane.showMessageDialog(null, getDocumnetId());
how to Stop the method action ( "action" ) if an exception occur in the method ("startAction")
( if the exception occur we doesn't need to show the JOption Message )

Hi,
try FacesContext.getCurrentInstance().renderResponse();
Frank

How to stop the charges incurred to my account based on the action of itunes storing U2's newest album into my iPhone that I personally did not pay for?

How to stop the charges incurred to my account based on the action of itunes storing U2's newest album into my iPhone that I personally did not pay for?

There was no charge. The album was free.

How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

[discussion moved to Creating, Editing & Exporting PDFs forum]

How to stop last action ?

HI,
I recently made a little mistake...on my imac and that reminded me that I have been meaning
to find this out in general..The keyboard shortcut would have come in handy in this case.
How can I stop an action that I do not want to continue ?
Or...what is the keyboard shortcut for doing this ?
I wanted to attach a photo to a gmail and unfortunately chose to attach the entire
iphoto collection rather than the single photo. So..I got the whirling color wheel and
it took forever to finally stop.
Is there a way I can stop the action before it completes ?
Sigh...I am transitioning back to mac from many years of(pardon the expression...PC use).
I'll get there...
Until I post questions here and so far you folks have been very patient....
Thanks for replies !

There may be another way, but one way to quit a process that has bogged down an application is to go to the Apple menu (you may need to click on the desktop to dismiss the spinning beachball and give you access to the menu) and select Force Quit. Highlight the app you want to stop and click on Force Quit.
Also, Command + Alt (Option) + esc should present the Force Quit option.

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to stop the waterflow?

Hi,
I need to make the water coming from the shower, when shower is clicked.
And the water should stop after 5 seconds.
The code is below.
The water is flowing nicely. But I do not manage to stop it.
I added a timer, which starts when the shower is clicked. And should stop the waterflow after 5 seconds have passed.
With the lines
if (stop = true)
     break;
     trace("break");
it looks like the for loop is breaking right from the start, from the first second. But not completely, somehow 1 or 2 drops are flowing.
Without these lines nothing is happening when the time is over (5 seconds from clicking the shower). Water is just flowing.
Can someone help? How to stop the water flowing after 5 seconds and clean of the array and stage from the waterdrops?
Many thanks in advance!
import flash.display.MovieClip;
import flash.events.Event;
import flash.utils.Timer;
import flash.events.TimerEvent;
var WatertropArray: Array = new Array();
var WaterArea01: MovieClip = new WaterArea();
var WaterBorder01: MovieClip = new WaterBorder();
var timer: Timer = new Timer(5000, 1);
var stopp: Boolean;
var i: uint;
Shower.addEventListener(MouseEvent.CLICK, waterFlowStart);
function waterFlowStart(event: MouseEvent): void
                addChild(WaterArea01);
                WaterArea01.x = WaterArea00.x;
                WaterArea01.y = WaterArea00.y;
                WaterArea01.alpha = 0;
                addChild(WaterBorder01);
                WaterBorder01.x = WaterBorder00.x;
                WaterBorder01.y = WaterBorder00.y;
                WaterBorder01.alpha = 0;
                stopp = false;
                timer.addEventListener(TimerEvent.TIMER, waterFlowEnd);
                timer.start();
                addWaterdrops();
                Shower.removeEventListener(MouseEvent.CLICK, waterFlowStart);
function addWaterdrops(): void
                for(var i: uint = 0; i < 100; i++)
                               var waterDrop: MovieClip = new Waterdrop();
                               addChild(waterDrop);
                               waterDrop.x = Math.round(Math.random() * stage.stageWidth / 1.5);
                               waterDrop.y = Math.round(Math.random() * stage.stageHeight / 3);
                               waterDrop.alpha = 0;
                               waterDrop.rotation = -12;
                               WatertropArray.push(waterDrop);
                               trace("waterdrops added");
                               moveWaterdrops();
function moveWaterdrops(): void
                waterDrop00.addEventListener(Event.ENTER_FRAME, waterFlow);
function waterFlow(event: Event): void
                for(var i: uint = 0; i < WatertropArray.length; i++)
                               WatertropArray[i].y += 8;
                               WatertropArray[i].x += 5;
                               //trace(i);
                               if(WatertropArray[i].hitTestObject(WaterArea01))
                                               WatertropArray[i].alpha = Math.random();
                                               WatertropArray[i].scaleX = Math.random();
                                               WatertropArray[i].scaleY = WatertropArray[i].scaleX;
                               if(WatertropArray[i].hitTestObject(WaterBorder01) || WatertropArray[i].x > stage.stageWidth || WatertropArray[i].y > stage.stageHeight / 2)
                                               WatertropArray[i].x = Math.round(Math.random() * stage.stageWidth / 1.5);
                                               WatertropArray[i].y = Math.round(Math.random() * stage.stageHeight / 3);
                                               WatertropArray[i].alpha = 0;
                               if(stopp = true)
                                               break;
                                               trace("break");
function waterFlowEnd(event: TimerEvent): void
                trace("TIME OVER");
                stopp = true;
                stoppTrue();
function stoppTrue(): void
                for(var i: uint = WatertropArray.length; i > WatertropArray.length; i--)
                               remove(i);
function remove(idx: int)
                removeChild(WatertropArray[idx]);
                WatertropArray.splice(idx, 1);
                trace("REMOVED");
                removeChild(waterDrop00);
                trace(i);

thanks again, kglad.
changed the for-loop and it is reaching now the last functions as well.
but there is still a but ... an error message.
function waterFlowEnd(event: TimerEvent): void
trace("TIME OVER");
stopp = true;
stoppTrue();                                                       // line 106
function stoppTrue(): void
for(var i: uint = WatertropArray.length-1; i >= 0; i--)
trace("stoppTrue");
remove(i);                                                         // line 115
function remove(idx: int)
removeChild(WatertropArray[idx]);                   // line 123
WatertropArray.splice(idx, 1);
trace("REMOVED");
//removeChild(waterDrop00);
trace(i);
and the output panel gives the following (tested with 5 water drops, 5 items in array):
TIME OVER
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at TitavannisinglisekeelneAS3_fla::MainTimeline/remove()[TitavannisinglisekeelneAS3_fla.Main Timeline::frame1:123]
at TitavannisinglisekeelneAS3_fla::MainTimeline/stoppTrue()[TitavannisinglisekeelneAS3_fla.M ainTimeline::frame1:115]
at TitavannisinglisekeelneAS3_fla::MainTimeline/waterFlowEnd()[TitavannisinglisekeelneAS3_fl a.MainTimeline::frame1:106]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
What is that error message trying to tell me?

How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

How to stop the auto-start of log reader agent (replication) right after my database is restored?

I have the scenario where the SQL server is restored (after migration).
This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
Thanks in advance - Jebah

Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
any other way to disable the jobs?
Steps I followed
Started with a Working publication and subscription
Disabled the jobs (log reader and distribution agents)
Backed up publisher, subscriber, distribution and msdb
Deleted the publication, subscription, publisher and subscriber
Restored the publisher, subscriber, distribution and msdb
Enabled the jobs and executed sp_replrestart
Observations/Issues
Replication does not work
Replication monitor does not show any error
Jobs are shows as enabled but not started in job monitor
Not able to start/stop the log reader and synchronization manually.
I am not sure if I have missed something while restoring the db.
Thanks in advance

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the timing out of web Discoverer Plus

I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus?
Thank you,
Olga

Please check Discoverer configuration guide which tells you which parameter to change in preference file(pref.txt).I think you change the value.

How to stop the report from Web!

hi,all!
Now I can start a report from Web with schedule parameter!Can you tell me how to stop the report via the Web server?Or tell me with which patameter.Thank a lot.

hello,
there is a CGI/Servlet command called killjob which you pass the job-id of the job you want to kill.
regards,
the oracle reports team --pw

How to stop the Dialog from being dragged

I was hoping that someone could tell me when calling a Dialog from Jframe, a how to stop the Dialog from being dragged
while a dialog is showing.
When it is visible I can still click and drag the Dialog
I want to set it so you can not drag it until the dialog has be closed.

If you don't have access to the parent frame, a "hack" that usually works:
Frame frame = Frame.getFrames()[0];
if (null != frame && frame instanceof JFrame){
JFrame jf = (JFrame)frame;
JDialog jd = new JDialog(jf, "title");
... code here ...
As each JFrame (or Frame) is opened, its stored in the array of Frames that you can get. Same thing with Dialog.getDialogs(). Almost always, at least so far for me I've never had this problem, the [0] index is the main window opened, or the parent/top frame. I'd put the check in there to be safe and make sure its a JFrame and usually you'll only have the one JFrame.

How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

How to STOP the action..

Similar Messages

Maybe you are looking for