How to stop the camera taking more than 1 frame at a time

I find it difficult on my Ipad and IPhone ----both OS 7 to take one photo without unintentionally taking about 10.

Hold down command key to select multiple songs, then "Get Info", and you will modify all fields at the same time.

Similar Messages

How do you select and move more than one bookmark at a time? Shift+Click does not select multiple items that are next to one another in a list because the item

How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.

Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]]

How to call the same query more than once with different selection criteria

Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
                     Income 2008 Income 2009
Customer A       10                 20
Customer B        30                  0
Sales organization YY
                     Income 2008 Income 2009
Customer A        20                5
Customer B        50                10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.

Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J.

How can i order prints of more than one photo at a time?

Hi I am trying to order prints of more than one photo at a time but can only select one photo - if I press command it just jumps to the next photo, not allowing me to select multiple photos.
Thanks

Easiest way is to make an album of the photos you want to order, crop them to the print size, select all and order
LN

How to get the contents of more than one comments of human task?

The human task have more than one comments. I use the following functions to get the contents but still only get the first comment. Append function only returns the first comment.
How to get all conents of comments?
<while name="While_1"
condition="bpws:getVariableData('Variable_int_i')<number(bpws:getVariableData('Variable_comment_node'))">
<sequence name="Sequence_3">
<sequence name="Sequence_3">
<assign name="Assign_7">
<copy>
<from expression="string(bpws:getVariableData('single_approve_1_globalVariable','payload','/task:task/task:userComment/task:comment'))"/>
<to variable="Variable_comment_string"/>
</copy>
</assign>
<assign name="Assign_6">
<copy>
<from expression="bpws:getVariableData('Variable_int_i')+1"/>
<to variable="Variable_int_i"/>
</copy>
</assign>
</sequence>
</sequence>
</while>

You also have to test the value:
REPORT ztest MESSAGE-ID 00.
DATA: BEGIN OF itab OCCURS 0,
        f1 TYPE i,
        f2 TYPE i,
        f3 TYPE i,
        f4 TYPE i,
      END OF itab.
DATA: sel_field(20),
      value TYPE i.
DO 5 TIMES.
itab-f1 = sy-index.
itab-f2 = sy-index + 10.
itab-f3 = sy-index + 20.
itab-f4 = sy-index + 30.
APPEND itab.
ENDDO.
LOOP AT itab.
WRITE: /001 itab-f1, itab-f2, itab-f3, itab-f4.
HIDE itab.
CLEAR itab.
ENDLOOP.
AT LINE-SELECTION.
CLEAR: sel_field,
         value.
GET CURSOR FIELD sel_field.
IF sy-subrc = 0.
    CASE sel_field.
      WHEN 'ITAB-F1'.
        value = itab-f1.
      WHEN 'ITAB-F2'.
        value = itab-f2.
      WHEN 'ITAB-F3'.
        value = itab-f3.
      WHEN 'ITAB-F4'.
        value = itab-f4.
    ENDCASE.
    MESSAGE s001 WITH 'Value of' sel_field 'is' value.
ELSE.
    MESSAGE s001 WITH 'Invalid field selected'.
ENDIF.
Rob

How to change the columns in more than one playlist

I am trying to change the columns in my playlists for all of my audio books. I have over thirty books on my computer with a play list for every cd adding up to over 500 playlists inside of folders for each book. I want to change all of the play lists to have audiobook related columns only. I was wondering if there is any shortcuts besides going into every folder and every playlist and manually changing them all.
What I already know: Changing the view options of a folder containing a playlist or other folder doesn't change the view options of all containing folders and playlists.
Doug's Applescript "Assimilate view options" is for changing all of my playlists to match the view options as the library and I cannot change the library because I have over 1500 album playlists.
If anyone could tell me how to change that I would really appreciate the help

Hi Manish,
There is no need to delete/inactive those entres.
It is the funtionality provided by SAP to store the short texts for catalog in multiple languages.
If you go to QS42 transaction with another language key selected during login. You can find another language short text.
Regards
Amit

How to Remove the Catalogs in More than One language

Hi Experts,
We find that there are code groups for Calalogs in 2 languages in the QPGT Table with same names.Can anyone tell how to make one as inactive or delete them.
While seeing through QS42 or via Config we cannot see the 2 set of codes.
Regards,
Manish
Edited by: Manish Chachra on Dec 9, 2008 6:52 AM

Hi Manish,
There is no need to delete/inactive those entres.
It is the funtionality provided by SAP to store the short texts for catalog in multiple languages.
If you go to QS42 transaction with another language key selected during login. You can find another language short text.
Regards
Amit

How to prevent the access of more than one person to an APEX application?

Hello,
I want to prevent the access to an application when it is already opened by another user.
How to do it?
Thank you by advance
Jean-Louis

Why would you want to do this? APEX applications are MEANT to be MULTI-USER WEB BASED APPLICATIONS? This makes NO SENSE..
If you need this functionality, you can do this in Access..
Thank you,
Tony Miller
Webster, TX

How to send the invoice through more than one E-mail Ids?

Hi Experts,
I need to send invoice to two email ids. I made a set up in vv31 by setting the transmission medium 7 but
it doesn't work.
The customer is asking that when i do invoice it should go to two email address.
Which output type i should take?
Kindly help me regarding this.
Thanks
Raghu

Hi,
In VV31
In communication maintain recipients as your 2 Emil id's and recipient type
If you have customized output then take that if Not then use standard RD00
Kapil

How to display the same field more than once in report with diff. filters

Hello,
I have an RTF template I built out. There is a 1:M relationship of an opportunity:deal point.
I want the user to be able to pass the opportunity and then see a report including all the deal points.
The report looks something like this:
Date: DP100
Terms: DP200
Duration: DP300
and so on. to simplify things, the date will always be DP100, terms will lways be DP200, etc.
Where do I set these filters? When using the query builder on the BI Publisher server i don't see anywhere to filter.

Here is a copied piece of the RTF template illustrating what I'm trying to do in the word template builder.
Tenant (Signing Entity): <Deal_Point_Value where Deal_point_name = 'DP231'>
Tradename (D/B/A): <Deal_Point_Value where Deal_point_name = 'DP240'>
State of Incorporation: <Deal_Point_Value where Deal_point_name = 'DP1330'>
Landlord: <Deal_Point_Value where Deal_point_name = 'DP1560'>
Premises: <Deal_Point_Value where Deal_point_name = 'DP144>
Storage Space: <Deal_Point_Value where Deal_point_name = 'DP235'>
Off Premises Equipment: <Deal_Point_Value where Deal_point_name = 'DP386'>
Term: <Deal_Point_Value where Deal_point_name = 'DP940'>
Options: <Deal_Point_Value where Deal_point_name = 'DP1200'>
Rent Commencement: <Deal_Point_Value where Deal_point_name = '1136'>
Estimated Delivery Date: <Deal_Point_Value where Deal_point_name = 'DP123'>

WRT 120N- Cannot connect to the internet with more than one PC at a time.

Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
   Connection-specific DNS Suffix . :
   IPv4 Address. . . . . . . . . . . : 92.98.42.65
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
   Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
   Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
   Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
   Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                       192.168.1.1
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.

brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

Is there a way to type the genre into more than 1 song at a time?

I have a list of songs and they are all the same genre. is there anyway to select all and type the genre once and have it fill in all selected?

Hold down command key to select multiple songs, then "Get Info", and you will modify all fields at the same time.

How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

Can we open more than one "folder" at a time in Bridge?

When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
Please alleviate my ignorance.

Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
Not so quick way: Select menu File => New Window. Open the second folder there.
If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
1) View the parent folder in bridge.
2) Open the Filter palette.
3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days. Even pulling the power to reboot it did no change. I'm the only user in the household that would log into it, so I don't understand how this could occur. How can I get in?
GLN2

I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create! I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
The backup function should work fine, I have used it to save my Steam port forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS logout when I am done. I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

How to stop the camera taking more than 1 frame at a time

Similar Messages

Maybe you are looking for