How to stop the duplicate idoc processing ? whar need to done SAP R/3

Hi All
If the Same Idoc is processed to SAP R/3 then what to do for not processing
the duplicate IDOC ?
Or some thing like this...
If by mistake same idoc processed then how to avoid to process the idoc?
what i need to in SAP R/3 side?
Regards
Kiran lvs

Hi
some thing like this:Using T.code: we19 ...Idoc processed a day ago
                                       today by using the same t.code we19 ..processed the
                                       same idoc, what i sent a day ago.
                                       Here how to stop this duplicate processing ?
I hope this is clear...else pl put a note
regards
Kiran lvs

Similar Messages

How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Hi experts,
I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
BDOC failure:
In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
Issue:
So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
Please help me to resolve this BDOC error.
regards,
Vicky

Hi Ganesh,
1st we create a Organization structure through tcode-PPOSA_CRM.
A business Partner is created which represent the Organization Structure partner ID.
2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
A business Partner is created which represent the any customer partner ID.
As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
Error we get in the BDoc: "BP XXXX doesnot exist"
Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
Possible Resolution 1:
1. I created this Org. BP in ECC through CRMM_BUPA_MAP
2. The BP got created.
3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
I don't know how to define BP as an internal Org. Unit in ECC?
Can you please help me in this.
Possible Resolution 2:
If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
Please let me know if this helps you to understand the issue i am facing?
regards,
Vicky

How to stop the 2nd screen processing from fristscreen

Hi Friends,
I have a problem in modulepool program, my user wantsto display the information message in screen1
without calling the 2nd screen.
for example.
user give the some input to screen fields, the system compare the what ever given inputs in screen1 is correct or not,
incase the information is not correct, that time my user wants the information message,
i wrote the information message in screen1 PAI, the message was displayed successfully but when i click the enter button the system calls the 2nd screen , what my user exact requirement is system does not call the second screen, he want to shows the frist screen after getting the message.
Can you please tell me solution.
Thanks
CHINNU

instead of information message...use pop_to_confirm .....and remain in the same screen....
    CLEAR v_response.
    CALL FUNCTION 'POPUP_TO_CONFIRM'
         EXPORTING
              titlebar              = 'Confirm Posting'
          text_question         = 'Do you want to Post Documents'
            text_question         = text_question
              text_button_1         = 'Yes'
              text_button_2         = 'No'
              default_button        = '2'
              display_cancel_button = ' '
              start_column          = 25
              start_row             = 6
         IMPORTING
              answer                = v_response
         EXCEPTIONS
              text_not_found        = 1
              OTHERS                = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CHECK v_response = '1'.
Edited by: sugunav on Sep 8, 2009 6:04 PM

How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to stop the backup process....

How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...

i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...

OBIEE Server Hangs how to stop the process?

Hi,
I schedule one report in BI publisher and in history its showing status as ‘Running’ from a long time, I want to terminate that process and want to stop the running report.
But as I don’t no much about OBIEE I am unable to do that. Could you please help me with this.
Thank you.

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to Debug the Outbound IDOC

Dear SDN Members,
How to debug the outbound idoc please.
Thanks in advance
Yerukala Setty

Hi,
IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc in transaction BD87 you can put a breakpoint in the function module and it will stop there.For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
Thanks,
Asit Purbey.

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the background job "Sap_collector_for_job_statistic"

Dear All,
Kindly let me know how to stop the Background job "Sap_collector_for_job_statistic" which is running everyday.
We want to stop this background job.
Kindly suggest.
Regards,
Mullairaja

Select the Job using SM37 transaction. In the Menu Choose
Job ---> Cancel Active Job.
Before you do this it may be good idea to check the pid using SM50.
It will be using a Background work process. Check the pid and the status.
Select the same and in the Menu Choose Process --> Cancel with Core.
Refresh and check in SM37 for the Active and Cancelled Jobs.

How to get the inbound idoc for the newly created inbound Idoc FM

Hi,
I have created a new function module to process the Inbound idoc. I need to have a idoc to check my function module, whether it is working fine or not. How I can get the data. Do I need to have the idoc from the partner ? Please help me ASAP.
Thanks,
sreenivas.

Hi Sreenivas,
Go to WE19 and get any of the your present idoc with the idoc type
then go to BD20...execute the same idoc...and there you can create the IDoc, and process the same with the Inbound function module tab..( give the FM you are using as the process code.)
from there you can do the debugging aswell of that FM
Thanks

How to stop the duplicate idoc processing ? whar need to done SAP R/3

Similar Messages

Maybe you are looking for