How to stop the Lollipop install on Note 4 after it accidentally started in my pocket(by powering on/install now) & removing the battery doesn't work?

My Note 4 accidentally powered on in my pocket and the annoying Verizon/Samsung lollipop update screen also started to install. I've been so careful not to install because the last thing I want is Lollipop to ruin my phone.. So i pulled out the battery immediately hoping but no luck as once the battery was in it started installing again so I pulled it out.. Please help as my luck with all prior Android updates since day 1 has been awful..

meeeeeeee,
We certainly want you to have a phone that works at all times. You will not be able to stop the software update, but there are a whole slew of great changes on the new software. I recommend allowing the update to finish. If you happen to have issues with your device afterwards, please let us know! We'd be happy to help iron out any troubles.
SandyS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

HT2188 How to stop the battery from draining

How to stop the battery from draining

I tried everything to stop my battery from draining on my iPad 2 since I have downloaded IOS 7.... Without success. Very disappointed with IOS 7 so far. Apple please release a patch to stop the battery from draining. It is urgent. My iPad is now useless, it is always drained to 0% everytime I open my iPad!?!?!

Hi there, i have a ipod nano general 7, just used one year. Now can't charge battery. When charging, the icon shows full power, but disconnect it. It becomes dark, no power. Why, the battery doesn't work ?

I've a ipod nano general 7, I've just used it one year. Now, I can't charge the battery. When charging, the icon shows full power. But when I disconnect, the ipod becomes dark, no power is keeped. Why, the battery doesn't work ? the life of my ipod's battery is too short ?

Howdy tamsg,
Welcome to Apple Support Communities.
The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPod nano charging or displaying a blank black screen.
iPod nano (7th generation): Hardware troubleshooting - Apple Support
So long,
-Jason

How to stop the battery draining on iphone4 with ios7?

I updated to ios 7 last week and am now starting to have battery problems with it.
I charged my phone this morning and by about 5:45pm my phone was completely dead. It was fully charged at 6am and was down to 60% by 10am without me even using it. I clicked the home button maybe a few times to check the time but that was it.
I also double checked all apps were closed except for the home screen. I looked up tips for conserving the battery last night and changed to all those setting to hopefully get longer life out of the battery but apparently to no avail.
It also apparently takes just about forever to charge the thing now. Almost like it's using a lot of the battery while charging it. I had wonderful battery life while using ios6 and understand it won't be the same with 7.0 but 12 hour battery life is pretty bad.
Any suggestions would be appreciated.
Thanks

Optimizing battery life
http://support.apple.com/en-us/HT204054
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Since 10.4.6, the battery doesn't work

The day after I installed 10.4.6, after about half an hour on battery power, the machine just shut down. Now it won't run on batter at all (yes, the battery is fully charged). Runs fine on AC, but not at all on battery. I've tried zapping PRAM and resetting the PMU, to no avail.
Anyone having a similar problem? Maybe the 10.4.6 update is a total coincidence, and I've had a problem on this machine once before, but thought I'd check for similar problems before sending it in.

Very interesting, Lionel - that is, indeed, exactly what mine does. It lasts a few fractions of a second before it dies, and when it comes back, it's as though I've zapped the PRAM, i.e. it doesn't know what time it is.
(I don't think this necessarily means the internal battery is dead - the way to find that out might be to do an orderly shutdown, then unplug for a while, then start back up. I haven't had time to do this, but I bet it wouldn't reset the clock. My guess is that the little clock/pram battery is fine, but that the abrupt shutdown is somehow zapping the PRAM that stores the time.)
You mentioned your PB is 4 months old, so it's also the higher-resolution/dual-layer Superdrive model ("powerbook 5.8" in System Profiler)? Had you installed either of the Battery Firmware Updates?
Please post back if you find out anything. I'm doing some work right now that keeps me from being able to part with the machine for a week, so I haven't taken it to my local Apple store. But this must have something to do with the firmware update that seems to have been part of the 10.4.6 update, right?

How long is the battery supposed to work

I've got a gen5 ipod and it only play 6hours music. IS it something i could do to change it?

James,
Not a bad site. Well done.
However, before the Moderators possibly shut down this post, see this link and adjust your future posts accordingly:
sysop, "Apple Discussions Terms of Use", 07:35am Jul 13, 2000 CDT
The relevant portion of it:
i "No advertising. Don't use the Site to sell or market your products to users. If you receive compensation or personal benefit from a purchase or site you advocate, or from an affiliate link, you must note this in your Submission by stating, "I may receive some form of compensation, financial or otherwise, from my recommendation or link." Advertisements for items that do not directly answer another user's question are not allowed."

I was given a used iPod, and the battery doesn't work for that long.

I want to take it to the Apple Store and see if they can exchange it or give me a new battery, but the iPod isn't registered under my name. My brother said that I have to give the registered name, but I'm unsure what it is, because who I got it from had gotten it from another person. Is it necissary to change the registered name, and if so how do I do this?

What apps are you using when your Macbook is running on batteries?
What do you have loading in your login items?
Open Activity monitor and see what's running under All Processes.
Were you playing games when your Macbook is running on batteries?
Did you turn off your bluetooth?
Do you have anything hooked up to your usb ports?
The above comments or questions factor in the way your battery last when using your Macbook under it's own power.

How to stop the spinning ball after trying to install 10.7.3?How

How to stop the spinning ball after trying to install V10.7.3?

Boot from your recovery partition by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
When the Recovery desktop appears, reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to stop the prodution order creating when the product is not valued?

Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!

Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S

How to stop the bridge.exe active as to install the new application eg.Flash CC?

how to stop the bridge.exe active as to install the new application eg.Flash CC? please help?
I can't install the any new application every time.

Please refer:
http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
Regards,
Ashutosh

How to stop the charges incurred to my account based on the action of itunes storing U2's newest album into my iPhone that I personally did not pay for?

How to stop the charges incurred to my account based on the action of itunes storing U2's newest album into my iPhone that I personally did not pay for?

There was no charge. The album was free.

How to check RBS maintainer is running or not and how to stop the RBS maintainer for a specific content db.

HI
how to check RBS maintainer is running after deleting orphan blobs and while deleting the blobs from rbs storage,
and also how to stop the RBS maintainer for a specific content db.
when I run below query I found the orphancleanup value true
SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
where config_key='orphan_cleanup_in_progress'
adil

HI
the RBS maintainer was run from one of web front end server And for one content database , that fine
but I now know this information only this did by other administrators.
Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and　 also I found this maintainer running I checked from when　 run sql queriy in 　sql
server
SELECT
[config_key],[config_value]
FROM
[mssqlrbs_resources].[rbs_internal_config]
where
config_key='orphan_cleanup_in_progress’
it 　given me true
here now I want to stop this orphan cleane up , what settings and script I will run?
adil

How to stop the auto updater in N900 application m...

Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
Click the star if this helps you (",)
If this is your answer, please do not forget to click "Accept as solution" (",)

virajx3006 wrote:
Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
dude check your inbox
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

How to stop the tab bar from automatically hiding itself?

ive only found how to stop the address bar from disappearing and everyone with the tab problem seems to have posted this over a week ago and still hasnt been fixed yet if noone has a fix im out and done with firefox they can suck a fat one
why add this feature! i can understand the address bar but not the tabs all you have to do to hide it was push the tab button again and its gone was that so fucking hard that you had ruin a perfectly fine browser

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and facilitate future improvements to Firefox, the option to hide the tab bar was removed.
Fortunately, this can easily be resolved if you desire the keep tabs hidden. You can install "[https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/ Hide tab bar with one tab]", an extension hosted on Mozilla's add-ons site, which will restore the ability to hide the tab bar.
Thank you and I hope this helps!

How to stop the Lollipop install on Note 4 after it accidentally started in my pocket(by powering on/install now) & removing the battery doesn't work?

Similar Messages

Maybe you are looking for