How to stop the "Press Menu to wach Fios TV, otherwise turn off your TV"

Does anyone know how to stop the STB from going into this mode? It messes up my other home entertainment equipment.
Thanks!

New option in IMG 1.7:
Menu ==> Settings ==> Set-Top Box ==> Screen Saver ==> No Screen Saver in Standby
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

Similar Messages

"Press Menu to Watch Fios TV" logo-turned off but came back!

I hated that logo that would appear when I would turn my TV on that says "Press menu to watch Fios TV. Otherwise turn your TV off." I looked through all the settings and options and finally found out how to get rid of it. I don't remember where I found it but it had options for that logo to come on after certain time intervals or to never come on. So I changed it to never and it stopped coming on for awhile.
Unfortunately, now it's back! I found that option again, assuming it had somehow been changed but it was still set to never come on. So why is it coming on again? I wouldn't mind so much if it weren't for the fact that I tape some things on VHS. Ok, you can stop laughing now about the fact that I use VHS. I have my reasons though it's not worth taking the time to explain. Anyway, the problem is that if that logo is on while the VHS is taping, all it tapes is the logo, not the show I had programmed to tape.
Does anyone have any idea why this logo came back, even though the setting is still set to not have it appear and what I can do to fix this problem?
Thank you!
-Tracy
Solved!
Go to Solution.

Depends on what model box you have.
But generally, look for screen saver.
Also, no real advantage to turn the box off.
Doesn't save any energy.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How to stop the bookmarks menu vanishing once a bookmark is selected

Hi, my Firefox bookmarks are nested; when I select one, the bookmark menu vanishes, which means to open several similar-topic bookmarks in different tabs I need to continually re-open bookmarks and delve down to the same level. Is there any way of making the bookmarks menu "sticky"? I'm on XP SP3 and latest version of Firefox (3.6.3)

You're welcome

How to stop the message "press 1 for ..."

Hello, while I'm at it...does anyone know how to stop the instructions that get attached to my outgoing voicemail message? You know, the one that says, press 1 for __, press 2 for __, press * to send a fax.....in my old phone (also with Verizon) it didn't have that message.
Thanks all!

I took this problem to a genius. He removed the SIM card and added a new "blank" card from AT&T. Using this SIM we went to setting an turned cellular data off. Then we put the Apple SIM back in the machine. Now you can turn off the cellular so you will no longer get the messages. To end this practice, sign up with a carrier. Just click the button in the Settings... menu.

How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the background job "Sap_collector_for_job_statistic"

Dear All,
Kindly let me know how to stop the Background job "Sap_collector_for_job_statistic" which is running everyday.
We want to stop this background job.
Kindly suggest.
Regards,
Mullairaja

Select the Job using SM37 transaction. In the Menu Choose
Job ---> Cancel Active Job.
Before you do this it may be good idea to check the pid using SM50.
It will be using a Background work process. Check the pid and the status.
Select the same and in the Menu Choose Process --> Cancel with Core.
Refresh and check in SM37 for the Active and Cancelled Jobs.

How to stop the v3 jobs?

how to stop the v3 jobs?

Goto SM37... Give Job Name as LIS. User *.
Enable Scheduld, Released and Active Check boxes...execute.
check job belongs to your Application.
You cancel the Active Job if you stop the Job.
or
You can make Released Job to Scheduled (Menu option Job --< Released --> Scheduled.).
Hope this helps.
Nagesh Ganisetti.

How to stop the call summary display on home screen?

How to stop the call summary display on home screen?

Here are the solutions I can think of (if no one here responds with something better):
1. Open Settings and then Phone within the Settings screen and see if you can find a setting there for the call summary. The Phone submenu under Settings would be the most likely place.
2. Open Settings on your iPhone and go through each item including all of the items within each main item. Within about 10 minutes you should be able to get through all of the settings and find the setting if it exists on your phone. There is no such setting on my phone but it is possible that Airtel has a custom menu with that.
3. If you still haven't found it, you could check a) Airtel's support site and/or b) an Airtel specific forum.
4. If still no luck, I would call Airtel and ask again and if you get the same response ask for the location of the setting (or to speak to someone who can tell you).
Good luck.

Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the pro

Anyone know how to stop the "activate" box from blocking usage of a perfectly legal copy of Ilisten? I want to help my dyslexic grandson and this box, including the activation code, keeps popping up, keeping me from using the software. I activated the program and did a few profile building sessions, now it pops up each time I start the program, blocking me from using it. Help sure would be appreciated.
Jay

I looked at your post this morning and did not know enough to respond, other than to find out that links to iListen now go to newer, renamed software. Considering it's been nine hours with no response, I'm suspecting few people here have experience with that software. You could contact the current copmany that used to sell that package and see if they have any archived support info.
BTW: please check you entry for "Mac OS" in your profile. It says iOS, which cannot run on an iMac. iOS is the system for phone and iPads but can't run on Mac computers. Do "About this Mac" from the Apple menu and see what it says about the OS version. Should look like this:
If the "Processor" line says "Intel," you have a newer Mac than the old modles this forum covers; Intel iMac have their very own forum here:
iMac (Intel)

HT4064 how to do you stop the issue when you have to click several times on your ipad to get into anything?

how to do you stop the issue when you have to click several times on your ipad to get into anything?

I think you have enabled VoiceOver; turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to get the standard Menu of Query Designer into Web Template

Hi Experts,
is there a way on how to put the standard menu within Bex Query Designer (after executing a Query with the Query Designer you get into ad-hoc reporting with a menu including several functions like print, show as..., properties, etc) into an individual Bex Web Template?
Copy & Paste source code will not work I guess because of several javascript functions I don't have access to.
Thanks & Best regards
Tobias

BEx queries are displayed on the web using standard web template 0ANALYSIS_PATTERN or some customized version base don your implementation.
You can either include the 0ANALYSIS_Pattern web template in your custom template or use Save as to create a new template with 0ANALYSIS_Pattern AS THE STARTING POINT.

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath

How to stop the "Press Menu to wach Fios TV, otherwise turn off your TV"

Similar Messages

Maybe you are looking for