How to stop the prompting message of master password when I open firefox when not opening on a site that doesn't use a password?

Every time I open Firefox it asks for my Master Password. I am not on a site that has a saved password, yet it still asks for it. Sure I can hit Cancel, but continually doing so is a nuisance. It never used to do this in past versions, it only asked for the master password when entering a site with a saved password. Is this a bug? How can I stop this annoying behavior. If needed my Start Page is: www.webcrawler.com.

Sync will try to connect to the Sync server to look for changes, from other devices that are setup for that account, shortly after Firefox is opened if anything is set to be synchronized, not just tabs. You need to disable Sync from "auto connecting" to Sync, disabling the sync of tabs alone isn't enough.
http://kb.mozillazine.org/About:config <br />
Double-click this pref to toggle it, then restart Firefox. <br />
'''services.sync.autoconnect''' to '''false'''
Then grab the Sync icon from the Customize Palette and use that to do a manual sync.

Similar Messages

  • HOW TO STOP THE PROMPTING MESSAGE OF MASTER PASSWORD EACH TIME I OPEN MOZILLA FIREFOX?

    HOW TO STOP THE PROMPTING MESSAGE OF MASTER PASSWORD EACH TIME I OPEN MOZILLA FIREFOX?

    Firefox will ask for the Master Password on startup if it is needed on a page.<br />
    This can be Sync or a web page that is (re)opened automatically and you have saved a name & password for this website.
    You didn't confirm whether you are using Sync or not, so I don't know which of the two would apply.

  • It downloads version 4.1 - but does not install it and always shows this as Firefox 4.0 - Yahoo edition. Moreover the tabs open when I close firefox do not open when I start next.

    Question
    It downloads version 4.1 - but does not install it and always shows this as Firefox 4.0 - Yahoo edition. Moreover the tabs open when I close firefox do not open when I start next. edit
    Details

    Download the official version of Firefox 4.0.1 here: <br />
    http://www.mozilla.com/en-US/firefox/
    Then un-install that Yahoo branded version and install the official version.

  • I have been using firefox on my desktop with windows xp for years with no problems and suddenly refused to open. The error message reads "unable to locate component. plc4.dll was not found." What does that mean? How do I fix it?

    The error message also suggests that I unintall and reinstall firefox, I tried that but it does not fix the problem.

    Which security software (firewall, anti-virus) do you have?
    If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
    Other security software may have similar features to prevent Firefox from updating files properly.
    See these pages for a similar issue with corrupted files:
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/880050]]

  • All of the App Tabs I have set when I quite Firefox did not open as App Tabs when you start Firefox again, why?

    All the App Tabs disappeared when I opened Firefox after quitting. I understand that the App Tabs that I had set remains there if I close the browser and not quit. So does that mean that I have to create App Tabs every time I restart FireFox?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

  • How to change the prompt message in a open file box

    Hello
    In my VI the user has to introduce several file path. They are sequenced so we know which one is requested. Is there an easy way to change the message on the "choose file to read" window in order to have "choose xxx file to read" etc... Is this through some VB programming or does labview have some tools for that ?

    There are two solutions:
    OBN's solution uses a function to get the file name.
    My solution uses the file control. You have to click on the browse button to select the file.
    Both solutions will open the system Open File dialog where the user can select the file. OBN's solution is more obvous to change the parameters. In my solution you have to use property nodes.
    See the VI (LV7.0) how my solution works.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions
    Attachments:
    Select File.vi ‏15 KB

  • How to stop the Confirmation of Prod. Order if GI to Prod Order not done?

    Dear all
    I am new to PP. Please bear with me with this silly question.
    My user always forgets to perform GI to Order using MVT 261 and straightaway go ahead with Confirmation of Production Order (CO11).
    It does give rise to some problem that some of the raw materials have been marked as Final Issue in Components Overview of Prod. Order but in real life, those raw materials are still sitting in the warehouse.
    Please advise what can I do in system configure so that If GI to Order (MVT 261) has not been done, user is not allow to perform Confirmation of Prod ORder?
    THanks in advance!

    Hey,
    GO TO
    BS02
    1) Create Status Prof with name XYZ,
        D.click on Status Prof, Select Object Type as PP/PM
        Go Back, now
        You will find a user status table
         Create status in status tab with two options,
                   Status   Short text                                   int st
        Say 1)  XY      Confirmation not allowed.          tick box
               2)  YZ       Confirmation allowed.
    Double click on XY Click on Create , You will find sum options with status like allowed, forbidden etc..
    Now go to confim Order tab
    1) Goods Movement             Set radio button on both 'Forbidden' and 'no activity' Button.
    Now go back to user status Again, Double click on YZ button,
    Again click on Create Button , You will find same options with status like allowed, forbidden etc.. this time you give set for
    two  options
    1) Confirm Order                Set Radio Button on both 'Allowed' and  'Set'
    2) Goods Movement           Set Radio Button on both 'Allowed' and 'Set'
    Save the Request.
    Go to Order type Parameter assign the Status Profile XYZ to Your Order Type.
    This will work out,
    Solve Your Problem.
    As a Result,
    In initial stage system will check the Confirmation status before GI, if Conf is not done system will give error.
    If confirmation is done the system changes its status , allows the GI by Checking the Status .
    Thank Regards,
    J.K.Pavan Kumar.
    SAP PP-PI.

  • Been tying to open a webpage that I use all the time, others tell me it is working but Firefox will not open it.

    I use a webpage while playing Travian and now I can not get it to open. The page is "http://travian.ws/analyser.pl?s=com2" . When I tried to open it earlier today a security window popped up and I thought that I clicked on the appropriate button so it would open but it never did and still it will not load. Have talked to others via Skype that tell me the page opens and works for them, still the page will not load. Have reloaded 'Firefox' and still unable to load the page.
    Open to any suggestions.
    Thanks
    Steve

    Did you try the start page?
    *http://travian.ws/analyser.pl
    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • All of the App Tabs I have set when I close Firefox will not open as App Tabs when you start Firefox again.

    the browser opens without any tabs just the main bar and the tabs below it

    It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See also:
    * http://kb.mozillazine.org/Session_Restore

  • How to stop the message "press 1 for ..."

    Hello, while I'm at it...does anyone know how to stop the instructions that get attached to my outgoing voicemail message?  You know, the one that says, press 1 for __, press 2 for __, press * to send a fax.....in my old phone (also with Verizon) it didn't have that message. 
    Thanks all!

    I took this problem to a genius.  He removed the SIM card and added a new "blank" card from AT&T.  Using this SIM we went to setting an turned cellular data off.  Then we put the Apple SIM back in the machine.  Now you can turn off the cellular so you will no longer get the messages.  To end this practice, sign up with a carrier.  Just click the button in the Settings... menu.

  • How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks

    How to stop the Sending USSD message on my iPad since upgrading. The eKit SIMM worked fine on my older iPad. Thanks

    Wiping my phone, restoring from backup, AND wiping all iTunes related files (from a search in Library and in Music) seems to have stopped this behavior.
    (I couldn't wipe the iTunes files on the machine with my media and apps, but I did so on the other machine--where I only sync contacts, calendars and bookmarks. My iTunes library is empty there anyway.)
    I don't know if this relates to an "app synching" issue that iTunes 9.0.1 fixed. Could be.

  • How to stop the Debug-master-Beacon command from console

    Q: How to stop the Debug-master-Beacon command from console
    A:  
    -"Debug-master-beacon" This command is basically used to see the  master beacon  sent and the received .
    -This command will  help in figuring out master discover issues.
     -You can run this command only from the console of the Ap.
    - Once you run the command you can stop it only by typing the command
    "No debug-master-beacon"
    Sample command below

    Hi Shravanthi,
    How the Substitution will work for stopping the user from changing the Depreciation key in asset master data. Can you please ellaborate in details.
    Regards,
    BABA

  • How can i stop the upgrade message appearing everytime i open iphoto?

    How can i stop the upgrade message appearing everytime i open iphoto?
    It's getting ridiculous that every time i open iphoto that it insists in being upgraded and repaired. Anyone know how i can get rid of this without reinstalling it?
    Thanks

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • HT5132 If I've already moved MobileMe albums to iPhoto, how can I stop the prompt asking me to move them to Aperture?

    If I've already moved MobileMe albums to iPhoto, how can I stop the prompt asking me to move them to Aperture?

    To William Lloyds recommendation I have to add the following: I tried to implement the suggestion and thus to have the Mobileme-account closed to avoid the lenghty process mentioned, however, I am given to understand that if one choose to have the account closed, ALL of the galleries/albums etc, so far hosted within Mobileme will ALSO be deleted within APERTURE!! And that is not exactly what I want, in as much as I am intending to move everything (Galleries etc) to Smugmug...any suggestions as to eliminate the migration suggeted within Aperture?

  • FF won't open and an error message appears on the screen "unresponsive script" it I open task manager and stop the error message FF runs normally, how do I fix this problem

    This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

    This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

Maybe you are looking for