How to stop the "Read Reciept" when using messaging in the BI Process Chain

Hey all - I set up a message in my process chain and now we get an email daily when that process finishes. However it's asking for a read receipt from the users that it sends the message to. I searched on this and also clicked on every button the message settings but could not find a way to turn off the read receipt request.
Does anyone know how to turn this off?

HI,
Go To
1. SCOT Tcode.
2. Click on SETTINGS on the upper tab.
3. Click on CONFIRMATION OF RECEIPT..
4.and check the Radio button.. SAP doesnot expectreceipt confirmation from internet..
and click the tick button..
Hope this helps u..
Best Regards,
VVenkat..

Similar Messages

How to stop a while loop when using tab control

How do you use a tab contol to stop what is happening on one tab when you switch to another tab? In the test example I attached, I have a while loop nested inside a case structure controlled by the tab control. When I tab to page two the elapsed timer starts but when I switch to another tab it does not stop. I can't come up with an easy way to stop or exit the while loop when I change tabs.
Thank you
Danny
Attachments:
tab control.vi ‏24 KB

I played with it a little more and came up with this fix. This fixes it but is not tied to the changing tabs as I was looking for. Is this just too many nested loops and a bad idea?
Danny
Attachments:
tab control fix maybe.vi ‏26 KB

Error when sending message(e-mail) from Process Chain ?

Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started                                                                          00        516         S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE)     00        550         S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out                                RSM        794         I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent          SO        654         S
30.06.2006 18:06:00 Error when sending message                                                        RSRA2        11         S
30.06.2006 18:06:01 Job finished                                                                        00        517         S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141

Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
                                                                     Duration   Duration
                         Completed Error      In transit Waiting    In transit Waiting
                                                                         hh:mm      hh:mm
B08(100)                        0          0          0          0
FAX Telefax              0          0          0          0       0:00       0:00
     5 INT Internet             0          0          0          0       0:00       0:00
SMTP              0          0          0                  0:00       0:00
X40 X.400                0          0          0          0       0:00       0:00
        RML R/Mail or            0          0          0          0       0:00       0:00
        PAG                      0          0          0          0       0:00       0:00
        PRT                      0          0          0          0       0:00       0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar

How fix problem of the Alt Key, when used with with the Clone stamp, generating an overlay image?

I am using CS5. When I try to use the Clone Stamp or Healing Brush Tools, pressing the Alt key generates an extraneous image which overlays the
the image which is being worked on prevents these tools from functioning by sliding at around when the ALT tool is pressed. Does any one elso have this odd problem? How can it be fixed?
Thanks,
JackIsaac

. Yes this was the problem. As a novice, I would have spent hours and hours figuring this out. Many thanks.

How to stop page from resetting when using a laser barcode scanner to fill input areas.

I am using Firefox 30 with Mac OS 10.9 at work. We keep track of workflow using a 3rd party website and scan the information in with a UBS laser barcode scanner.
In Firefox the input regions will fill with the information, but then clear without saving or sending the information to the site. What settings are needed for Firefox to keep and send the scanned information?

Just a WAG.
Try the first item in Accessibility = Always use the cursor keys to navigate within page
''assuming that web app doesn't use the cursor keys for anything''
Have you attempted to get support for that website or website app?
Without more information all we can do is guess.
It's been 10 years or so, but I did play with the CueCat barcode scanner a bit and even modified some software that I found on a CueCat enthusiast website to do silly things and to re-purpose it to keep an inventory of my CD collection. ''(Yep, that long ago.)''
The CueCat it was sending keyboard commands, which wasn't hard to figure out, because it piggy-backed on the PS/2 keyboard cable; there were a very small number of USB versions made for retail store kiosks and for demo purposes, but the whole project was killed before they started making the USB for consumers.

Can you turn off the charging feature when using accessories?

Can you turn off the charging feature when using accessories with the iPad?

You cannot overcharge the battery when using the power adapter. Once the battery is fully charged, the iPad will no longer continue to charge if it is still connected. I leave my iPad on the power adapter for hours on end - on weekends when I am not at work.
iPad - Charging the Battry
http://support.apple.com/kb/HT4060
About the iPad Battery
http://www.apple.com/batteries/ipad.html
These are both worthwhile reading for concerns about the battery and how to properly maintain it.
I know nothing about external speakers with the iPad since I do not use them - but If the speaker is with a dock of some sort that charges the iPad - you should have no worries. If it is a dock that charges the iPad - I know of no way to turn off the charging feature, but it will not shorten the life of the battery anyway as long as the battery is properly maintained and cared for.
Message was edited by: Demo

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

I recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

I would try contacting Apple.
http://www.apple.com/support/ipodtouch/contact/

How to I stop safari from automatically resizing the bookmark bar when I click on the search bar?

there is probably an eloquent way to ask this but I don't even know what the feature is called.
Here is what it's doing:
I'm using safari in landscape mode on my iPad.
I click on the search bar and then the bookmarks come up below.
It takes a second to automatically resize to a size that make no sense, usually cutting off bookmark titles...and the delay of it resizes drives me nuts.
Safari did not used to do this until I guess ios 8. Any ideas how to stop this annoying "feature"??

Try deleting the Cache.db...
Quit Safari.
Go to ~/Library/Caches/com.apple.Safari/Cache.db
Move the Cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari ...
You may want to try the Safari Reading List as an alternative to tabs.
Click the eyeglass icon just to the left of the Bookmarks icon top left side of the Safari window.
Drag the url to the window or click Add Page

I have an Iphone 4S, when I am on the phone and I get a new message my phone vibrates and rings. How can I stop this from happening when I am on the phone

I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone

Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.

Hi I've just download os x mavericks 10.9 on my macbook pro the trouble is when i am on the internet my screen goes of it keeps saying put in your password how can i stop this every time the screen goes to sleep

hi I've just download os x mavericks 10.9 on my macbook pro the trouble is when i am on the internet my screen goes of it keeps saying put in your password how can i stop this everytime the screen goes to sleep

I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

How do I physically connect the SCXI 1180 when using a 1520 and 1346 adapter?

Here's my current configuration:
SCXI 1000 chassis
x2 SCXI 1520 Bridge Modules (Slot 1, and Slot 2)
1180 Feedthrough panel.
I recently purchased a 1346 adapter so I can use the feedthrough to access AI channels on the DAQ card.
My question is, how do I physically connect the ribbon cable of the 1180? Does it plug into the BACK of the last module in the chassis (ie. bridge module2 in slot 2) or does it plug into the other 49pin connector on the 1346 adapter?
If you read the installation manual for the 1180 http://www.ni.com/pdf/manuals/371062a.pdf (Page 2-3)
And the installation manual for the 1346 http://www.ni.com/pdf/manuals/320722b.pdf (page 2)
it seems the instruction contradict eachother. The 1180 manual says connect it to the back of the module
the note under Fig.2 on page 2 of the 1346 says you cannot have anything plugged into the module next to the one that has the 1346 plugged into it; in my case that's module 2...
SCXI- 1000 Chassis w/ 1346 adapter
PCI 6281 DAQ card
SCXI- 1520 Bridge Board w/ 1314 Terminal Block (x2)
SCXI- 1180 Feedthrough Panel w/ 1302 Block
Signal Express 2014.
Win7 Enterprise

I have the 1346 plugged into the first module in slot 1.
But let me try and clairfy what you're saying...
"Then the cable from the 1346 kind of loops back into the chassis and through the 1180". So this is my answer? But I'm actually taking the cable from the 1180 and plugging it into the other 49-pin connector on the 1346. Sorry, symantics...
"...it must be on the first card when using a 1520". By "it" are you referring to the 1346 (which is how it's currently configured) or the 1180 cable?
and lastly; why does the 1180 need to go into slot 2? I can currently fill both slots (1&2) with the 1520's and with the 1346 plugged into module1/slot1, I can pass the ribbon cable around back of module2 and into the 1346.
Is there some other reason beside potential space limitations that you'd use the feedthrough in slot2?
Thanks for your info and patience!
Message Edited by OKors on 03-31-2010 12:50 PM
SCXI- 1000 Chassis w/ 1346 adapter
PCI 6281 DAQ card
SCXI- 1520 Bridge Board w/ 1314 Terminal Block (x2)
SCXI- 1180 Feedthrough Panel w/ 1302 Block
Signal Express 2014.
Win7 Enterprise

Actually I have problem in adding music to be played across all folios, the problem happened when I just lock the ipad and open it, the publication is still opened and i can navigate it but the music is stopped, and cann't be continued. how can I fix it t

Actually I have problem in adding music to be played across all folios, the problem happened when I just lock the ipad and open it, the publication is still opened and i can navigate it but the music is stopped, and cann't be continued. how can I fix it to be continued after opening the ipad and continue navigating the digital publication.

yes,thank you for ur answer, but the owner of the publication which I working on said for me that this is a problem, and we can't submit the digital publication if I can't fix it.
Is their any solution to make the audio run after the device is unlocked.

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

How to stop the "Read Reciept" when using messaging in the BI Process Chain

Similar Messages

Maybe you are looking for