How to stop the record
hi dear,
how we can stop the particular row(fulfilling the particular condition) entered in table in (Pre Insert Trigger)
suppose we have 100 records to be feeded from which we 40 records should be feeded (not fulfilling the condition) and 60 should not be feeded.
if we used the raise_application_error stm, then the particular row is not feeded and error msg came also.
i want error msg not came and remaining rows should be feeded, i donot want to use on Insert trigger.
thanx
usman
Undoubtedly the easiest way of trapping this is at the feed - i.e. get them to send only the forty records you want. If that's not possible, and I can understand that it frequently isn't, then you need to re-direct the feed to a staging area, a table of some description (maybe a temporary one). Then you can insert into the real table by selecting the appropriate subset from the staging table.
Other approaches are open to you, depending on how you receive the feed rows. More details please.
Cheers, APC
Similar Messages
-
How to stop the pdf reading record?
How to stop the pdf reading record? I don't want my track record to be leave on the computer.
Exactly what face reading program are you talking about? Did you download and install it?
Also, please furnish relevant information: Mac model/year. -
HDR-CX405 How to stop dual recording, only mp4 file needed.
Hello Sony, Yesterday i purchased HDR-CX405. My question is, how to stop dual recording? Only mp4 file needed. Both file created on memory card while shooing video scene - AVCHD and mp4. I don't want AVCHD (too big file), just want mp4 file only.
Hi mkpi49,
Welcome to the Sony Community!
I would just like to confirm the answer VideoGeek posted. The camera can only record in Mp4 when it's set to Dual Rec. Both an AVCHD and Mp4 file will be created and written on your card. We would also suggest recording in AVCHD and later converting the file to Mp4 using the PlayMemories Home software.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch -
How to edit the records in error stock.
Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAPHI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM -
Regarding how to delete the record in internal table
Hi experts ,
how to delete the record in intarnal table after validating the data,
if record contains invalid fields?
i am giving my code see this and give me the answer?
loop at it_data into wa_data .
Validate Cost Center
READ TABLE it_kostl INTO wa_kostl WITH KEY kostl = wa_data-kostl BINARY SEARCH.
IF sy-subrc NE 0.
PERFORM update_error_log USING wa_data
text-004.
ENDIF.
Validate source file material ( material number )
loop at it_mara into wa_mara .
read table it_ausp into wa_ausp with key atwrt = wa_data-i_matnr .
if sy-subrc NE 0 .
PERFORM update_error_log USING wa_data
text-002.
delete it_data-objek .
else.
read table it_mara into wa_mara with key matnr = wa_ausp-objek .
if sy-subrc EQ 0 .
wa_data-objek = wa_mara-matnr.
wa_data-matkl = wa_mara-matkl.
ENDIF.
Modify it_data from wa_data .
endif.
*endloop.
Validate unit of measure (unit)
READ TABLE it_t006 INTO wa_t006 WITH KEY msehi = wa_data-unit .
IF sy-subrc NE 0.
PERFORM update_error_log USING wa_data
text-003.
endif.
Validate delivery location ( storage location )
READ TABLE it_lgort INTO wa_lgort WITH KEY del_loc = wa_data-del_loc.
IF sy-subrc NE 0.
PERFORM update_error_log USING wa_data
text-001.
if wa_data-flag ='x' .
delete it_data from wa_data .
endif.
ENDIF.
endloop.Hi Naren,
First get the index number of the IT_data table and store it in one variable whose declaration like this.
data: tabix type sy-tabix.
while reading the internal table it_data set the tabix variable.
tabix = sy-tabix.
Instead of the above use below one.
Delete it_data-objek
Use the Below statement it will delete the row from the internal table.
Delete it_data-objek index tabix
Thanks,
Chidanand -
How to delete the record of saved HRA Details...
Hi Experts,
I have put the details of HRA Correctly.But while updating HRA In 0008 Infotype i wrongly updated the wagetype,How should i change the Wagetype.
When i m trying to delete it is showing RECORD CAN NOT BE DELETED (TIME CONSTRAINT 1).
How can delete the record.
Thanking u .
SaiHi
Hope doing well ........ No need to delete any infotype but u can go to PA30 and in change mode their u can delete the wagetype which is wrongly entered
Rajeshk -
How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload? -
HOw to view the records in a structure qaqee ?
hi every one ,
we can view the tble through SE16
HOw to view the records in a structure qaqee ?
Thanks in advanceHello,
Please check the link
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/90/8d7301b1af11d194f600a0c929b3c3/content.htm
You can view the struture in SE11 t-code for its components.
Regards,
Shailesh -
How to stop the changes made for the BP in CRM not to update in R/3
Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram RaghuHello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72 -
How to stop the waterflow?
Hi,
I need to make the water coming from the shower, when shower is clicked.
And the water should stop after 5 seconds.
The code is below.
The water is flowing nicely. But I do not manage to stop it.
I added a timer, which starts when the shower is clicked. And should stop the waterflow after 5 seconds have passed.
With the lines
if (stop = true)
break;
trace("break");
it looks like the for loop is breaking right from the start, from the first second. But not completely, somehow 1 or 2 drops are flowing.
Without these lines nothing is happening when the time is over (5 seconds from clicking the shower). Water is just flowing.
Can someone help? How to stop the water flowing after 5 seconds and clean of the array and stage from the waterdrops?
Many thanks in advance!
import flash.display.MovieClip;
import flash.events.Event;
import flash.utils.Timer;
import flash.events.TimerEvent;
var WatertropArray: Array = new Array();
var WaterArea01: MovieClip = new WaterArea();
var WaterBorder01: MovieClip = new WaterBorder();
var timer: Timer = new Timer(5000, 1);
var stopp: Boolean;
var i: uint;
Shower.addEventListener(MouseEvent.CLICK, waterFlowStart);
function waterFlowStart(event: MouseEvent): void
addChild(WaterArea01);
WaterArea01.x = WaterArea00.x;
WaterArea01.y = WaterArea00.y;
WaterArea01.alpha = 0;
addChild(WaterBorder01);
WaterBorder01.x = WaterBorder00.x;
WaterBorder01.y = WaterBorder00.y;
WaterBorder01.alpha = 0;
stopp = false;
timer.addEventListener(TimerEvent.TIMER, waterFlowEnd);
timer.start();
addWaterdrops();
Shower.removeEventListener(MouseEvent.CLICK, waterFlowStart);
function addWaterdrops(): void
for(var i: uint = 0; i < 100; i++)
var waterDrop: MovieClip = new Waterdrop();
addChild(waterDrop);
waterDrop.x = Math.round(Math.random() * stage.stageWidth / 1.5);
waterDrop.y = Math.round(Math.random() * stage.stageHeight / 3);
waterDrop.alpha = 0;
waterDrop.rotation = -12;
WatertropArray.push(waterDrop);
trace("waterdrops added");
moveWaterdrops();
function moveWaterdrops(): void
waterDrop00.addEventListener(Event.ENTER_FRAME, waterFlow);
function waterFlow(event: Event): void
for(var i: uint = 0; i < WatertropArray.length; i++)
WatertropArray[i].y += 8;
WatertropArray[i].x += 5;
//trace(i);
if(WatertropArray[i].hitTestObject(WaterArea01))
WatertropArray[i].alpha = Math.random();
WatertropArray[i].scaleX = Math.random();
WatertropArray[i].scaleY = WatertropArray[i].scaleX;
if(WatertropArray[i].hitTestObject(WaterBorder01) || WatertropArray[i].x > stage.stageWidth || WatertropArray[i].y > stage.stageHeight / 2)
WatertropArray[i].x = Math.round(Math.random() * stage.stageWidth / 1.5);
WatertropArray[i].y = Math.round(Math.random() * stage.stageHeight / 3);
WatertropArray[i].alpha = 0;
if(stopp = true)
break;
trace("break");
function waterFlowEnd(event: TimerEvent): void
trace("TIME OVER");
stopp = true;
stoppTrue();
function stoppTrue(): void
for(var i: uint = WatertropArray.length; i > WatertropArray.length; i--)
remove(i);
function remove(idx: int)
removeChild(WatertropArray[idx]);
WatertropArray.splice(idx, 1);
trace("REMOVED");
removeChild(waterDrop00);
trace(i);thanks again, kglad.
changed the for-loop and it is reaching now the last functions as well.
but there is still a but ... an error message.
function waterFlowEnd(event: TimerEvent): void
trace("TIME OVER");
stopp = true;
stoppTrue(); // line 106
function stoppTrue(): void
for(var i: uint = WatertropArray.length-1; i >= 0; i--)
trace("stoppTrue");
remove(i); // line 115
function remove(idx: int)
removeChild(WatertropArray[idx]); // line 123
WatertropArray.splice(idx, 1);
trace("REMOVED");
//removeChild(waterDrop00);
trace(i);
and the output panel gives the following (tested with 5 water drops, 5 items in array):
TIME OVER
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at TitavannisinglisekeelneAS3_fla::MainTimeline/remove()[TitavannisinglisekeelneAS3_fla.Main Timeline::frame1:123]
at TitavannisinglisekeelneAS3_fla::MainTimeline/stoppTrue()[TitavannisinglisekeelneAS3_fla.M ainTimeline::frame1:115]
at TitavannisinglisekeelneAS3_fla::MainTimeline/waterFlowEnd()[TitavannisinglisekeelneAS3_fl a.MainTimeline::frame1:106]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
What is that error message trying to tell me? -
How to stop the internal batch session
Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael -
I have the scenario where the SQL server is restored (after migration).
This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
Thanks in advance - JebahThanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
any other way to disable the jobs?
Steps I followed
Started with a Working publication and subscription
Disabled the jobs (log reader and distribution agents)
Backed up publisher, subscriber, distribution and msdb
Deleted the publication, subscription, publisher and subscriber
Restored the publisher, subscriber, distribution and msdb
Enabled the jobs and executed sp_replrestart
Observations/Issues
Replication does not work
Replication monitor does not show any error
Jobs are shows as enabled but not started in job monitor
Not able to start/stop the log reader and synchronization manually.
I am not sure if I have missed something while restoring the db.
Thanks in advance -
How to stop the running infospoke
Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN -
How to stop the timing out of web Discoverer Plus
I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus?
Thank you,
OlgaPlease check Discoverer configuration guide which tells you which parameter to change in preference file(pref.txt).I think you change the value.
-
How to stop the report from Web!
hi,all!
Now I can start a report from Web with schedule parameter!Can you tell me how to stop the report via the Web server?Or tell me with which patameter.Thank a lot.hello,
there is a CGI/Servlet command called killjob which you pass the job-id of the job you want to kill.
regards,
the oracle reports team --pw
Maybe you are looking for
-
All day events in iCal on 3Gs w/ iOS 4.0.2 show up day early in List view
For some reasons, all day events on my Calendar (iCal synced via MobileMe) are showing up a day earlier on my iPhone, but only when I use List view. They appear fine when I use iCal on my MBP or iMac. This happens with all day events on my calendars
-
Unable to print on hp 1320 even after installing upd
I am unable to print (even test pages) to my printer. I've tried installing the upd and after days of working on it, was finally able to print. But I'm finding that it won't print again today. I also notice that there are 2 printers installed. One is
-
Album and Photo Pages Paint In/Refresh Slowly
It seems about 60 days or so ago, everything worked fine. When displaying a picture page or one linked through albums, the screen view painted in very quickly. Now it hesitates on showing the album view and really takes a long time for the picture pa
-
After 6.01 update on Mac, Firefox runs way slow, and is almost unusable
Running 10.5.8. After FF updated to the latest version, it is unbearably slow. Tried reinstalling, but it didn't help
-
how to verify apple id