How to stop the registry without JVM restart

Hi,
I have a question about the Registry object. In my project, custom RMIClient/ServerSocketfactories are used (a wrapper to SSL), and a few components (distributed) have their own registries. These applications read their config files from XML documents. One of the parameters in the config files are keystore locations and passwords for these keystores. These applcations offers a simple CLI interface allowing to execute a few commands (like q - quit, r - restart and such).
Now when I type the 'r' option so the application can restat and parse it's configuration file again, there is a possibility that some value related to the socket factories (keystore location or password) has changed. In that case, the registry created by CreateRegistry is no longer valid since it uses socket factories that are based on the old parameters.
What I want to achieve is to stop the existing registry and create a new one (I'm not using the rmiregistry deamon). Of course I cannot simply create new registry cause then I'd get an internal error (ObjID already in use). I safely unbind all existing objects and unexport objects for which there can possibly be any references, but still I need to stop the entire registry and start a new one. I'd like to know if this is possible at all (via some deep Java guts?) without restarting the whole JVM?
thanks,
owczi

Worked like a charm. I've seen Registry's javadoc hundreds of times and still I couldn't associate a simple fact that Registry extends Remote :]

Similar Messages

I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

I need a fix from HP which outlined how to remove the registry entries which were stopping recognition of the cd/dvd reader but then itunes cannot find the reader.

Thanks for pointing that out, it was not apparent on the day i used them and wrote the How-To. The links have been replaced with the SID# (Solution ID #) and the title given for the Article.
Have fun

Help! How do I stop the registry?!

I'm using RMI and binding the registry to a port. However, if I close down the RMI application and re-start it, the registry is still bound to the port and causes errors. Is there any way I can shut-down the registry without having to kill it off manually?
Thanks.

Normally it is safest to allow the remote servers to be unexported automatically.
However in a condition wher you want to unexport an object manulally, UnicasRemoteObject provides a static method unexportObject. This object however provides a force parameter which can ve set to true if the object is to be forcibly unexported regardless of whether or not remote calls are currently in progress.
The name of the object to be unexported is a parameter passed to the method
have a look
public static boolean unexportObject(Remote obj,
boolean force)
throws NoSuchObjectException
Removes the remote object, obj, from the RMI runtime.

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the waterflow?

Hi,
I need to make the water coming from the shower, when shower is clicked.
And the water should stop after 5 seconds.
The code is below.
The water is flowing nicely. But I do not manage to stop it.
I added a timer, which starts when the shower is clicked. And should stop the waterflow after 5 seconds have passed.
With the lines
if (stop = true)
     break;
     trace("break");
it looks like the for loop is breaking right from the start, from the first second. But not completely, somehow 1 or 2 drops are flowing.
Without these lines nothing is happening when the time is over (5 seconds from clicking the shower). Water is just flowing.
Can someone help? How to stop the water flowing after 5 seconds and clean of the array and stage from the waterdrops?
Many thanks in advance!
import flash.display.MovieClip;
import flash.events.Event;
import flash.utils.Timer;
import flash.events.TimerEvent;
var WatertropArray: Array = new Array();
var WaterArea01: MovieClip = new WaterArea();
var WaterBorder01: MovieClip = new WaterBorder();
var timer: Timer = new Timer(5000, 1);
var stopp: Boolean;
var i: uint;
Shower.addEventListener(MouseEvent.CLICK, waterFlowStart);
function waterFlowStart(event: MouseEvent): void
                addChild(WaterArea01);
                WaterArea01.x = WaterArea00.x;
                WaterArea01.y = WaterArea00.y;
                WaterArea01.alpha = 0;
                addChild(WaterBorder01);
                WaterBorder01.x = WaterBorder00.x;
                WaterBorder01.y = WaterBorder00.y;
                WaterBorder01.alpha = 0;
                stopp = false;
                timer.addEventListener(TimerEvent.TIMER, waterFlowEnd);
                timer.start();
                addWaterdrops();
                Shower.removeEventListener(MouseEvent.CLICK, waterFlowStart);
function addWaterdrops(): void
                for(var i: uint = 0; i < 100; i++)
                               var waterDrop: MovieClip = new Waterdrop();
                               addChild(waterDrop);
                               waterDrop.x = Math.round(Math.random() * stage.stageWidth / 1.5);
                               waterDrop.y = Math.round(Math.random() * stage.stageHeight / 3);
                               waterDrop.alpha = 0;
                               waterDrop.rotation = -12;
                               WatertropArray.push(waterDrop);
                               trace("waterdrops added");
                               moveWaterdrops();
function moveWaterdrops(): void
                waterDrop00.addEventListener(Event.ENTER_FRAME, waterFlow);
function waterFlow(event: Event): void
                for(var i: uint = 0; i < WatertropArray.length; i++)
                               WatertropArray[i].y += 8;
                               WatertropArray[i].x += 5;
                               //trace(i);
                               if(WatertropArray[i].hitTestObject(WaterArea01))
                                               WatertropArray[i].alpha = Math.random();
                                               WatertropArray[i].scaleX = Math.random();
                                               WatertropArray[i].scaleY = WatertropArray[i].scaleX;
                               if(WatertropArray[i].hitTestObject(WaterBorder01) || WatertropArray[i].x > stage.stageWidth || WatertropArray[i].y > stage.stageHeight / 2)
                                               WatertropArray[i].x = Math.round(Math.random() * stage.stageWidth / 1.5);
                                               WatertropArray[i].y = Math.round(Math.random() * stage.stageHeight / 3);
                                               WatertropArray[i].alpha = 0;
                               if(stopp = true)
                                               break;
                                               trace("break");
function waterFlowEnd(event: TimerEvent): void
                trace("TIME OVER");
                stopp = true;
                stoppTrue();
function stoppTrue(): void
                for(var i: uint = WatertropArray.length; i > WatertropArray.length; i--)
                               remove(i);
function remove(idx: int)
                removeChild(WatertropArray[idx]);
                WatertropArray.splice(idx, 1);
                trace("REMOVED");
                removeChild(waterDrop00);
                trace(i);

thanks again, kglad.
changed the for-loop and it is reaching now the last functions as well.
but there is still a but ... an error message.
function waterFlowEnd(event: TimerEvent): void
trace("TIME OVER");
stopp = true;
stoppTrue();                                                       // line 106
function stoppTrue(): void
for(var i: uint = WatertropArray.length-1; i >= 0; i--)
trace("stoppTrue");
remove(i);                                                         // line 115
function remove(idx: int)
removeChild(WatertropArray[idx]);                   // line 123
WatertropArray.splice(idx, 1);
trace("REMOVED");
//removeChild(waterDrop00);
trace(i);
and the output panel gives the following (tested with 5 water drops, 5 items in array):
TIME OVER
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at TitavannisinglisekeelneAS3_fla::MainTimeline/remove()[TitavannisinglisekeelneAS3_fla.Main Timeline::frame1:123]
at TitavannisinglisekeelneAS3_fla::MainTimeline/stoppTrue()[TitavannisinglisekeelneAS3_fla.M ainTimeline::frame1:115]
at TitavannisinglisekeelneAS3_fla::MainTimeline/waterFlowEnd()[TitavannisinglisekeelneAS3_fl a.MainTimeline::frame1:106]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
What is that error message trying to tell me?

How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the restructuring (ran manually) which is running in the backg

How to stop the restructuring (ran manually) which is running in the background.
Tried stop the data base from EAS , but got error message saying that it is not acceptiong any commands.

The only way I know to do it is to stop the application through task manager(Windows) or Kill(Unix). First you have to figure out what PID it is, then kill it. It does come with risk of corrupting the application depending on what step it is in. If you go this route, you should clean up the new created temporary files (Otn, Esn, etc) Some newer versions don't need this last step and will clean up when the application restarts, but I'd rather make sure things look good myself.

How to stop the Calendar from editing your input?

How to stop the Calendar from editing your input?

I am constantly finding that Calendar Version 8.0 thinks it knows what I want to type but it incorrectly takes numbers and days and times out of my input and changes my appointments. I hate this new supposedly "smart" feature. Even when I edit my event correctly a second or third time it rewrites my input incorrectly again. I have to use my iPhone to override the annoying editing on my mac. I am ready to find a new calendar program unless Apple allows users to input what they want without their information being incorrectly edited.

How to stop the spinning wheel?

How to stop the spinning wheel?

Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or "failed".
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

How to stop the gray wheel from spinning after logging out

how to stop the gray wheel from spinning after logging out?

Frank ...
Make sure to quit all open applications before logging out.
Your proflie indicates your Mac has v10.7.1 installed.
If that is the case, updating your system software will help as far as functionaly as well as security.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac.
message edited by: cs

HT2188 How to stop the battery from draining

How to stop the battery from draining

I tried everything to stop my battery from draining on my iPad 2 since I have downloaded IOS 7.... Without success. Very disappointed with IOS 7 so far. Apple please release a patch to stop the battery from draining. It is urgent. My iPad is now useless, it is always drained to 0% everytime I open my iPad!?!?!

How to write the CMD command for restarting all obi services?

Hi Experts,
BIEE:11.1.1.6
How to write the CMD command for restarting all obi services automatically by windows task scheduler?
I am try to write the code as below, but it does not work. Please help me to review it and check what I am missing.Thanks.
Or is there any better method for solving my requirement ? Please share me.Thanks very much.
cd C:\InstallPath\OBIEE\instances\instance1\bin
opmnctl stopall
opmnctl startall
I am facing the problem that it does not excute the 'opmnctl startall' code, which will be stopped after 'opmnctl stopall',
So how to modify the command ?Thanks

See if any of the these are useful or solves your query -
4.5.2 Using a Windows Service to Start and Stop System Components
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BABEEAAI
4.5.3 Using the Oracle BI Systems Management API to Programmatically Start and Stop Oracle Business Intelligence
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BABFGICA
Edited by: Abhi on May 8, 2013 4:44 AM

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to stop the registry without JVM restart

Similar Messages

Maybe you are looking for