How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Hi experts,
I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
BDOC failure:
In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
Issue:
So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
Please help me to resolve this BDOC error.
regards,
Vicky

Hi Ganesh,
1st we create a Organization structure through tcode-PPOSA_CRM.
A business Partner is created which represent the Organization Structure partner ID.
2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
A business Partner is created which represent the any customer partner ID.
As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
Error we get in the BDoc: "BP XXXX doesnot exist"
Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
Possible Resolution 1:
1. I created this Org. BP in ECC through CRMM_BUPA_MAP
2. The BP got created.
3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
I don't know how to define BP as an internal Org. Unit in ECC?
Can you please help me in this.
Possible Resolution 2:
If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
Please let me know if this helps you to understand the issue i am facing?
regards,
Vicky

Similar Messages

Does anyone know how to stop the MOTU midi express xt sync port from sendin

Hi everyone,
The MOTU MIDI Express XT has 7 IN ports and 8 OUT ports. The missing 8th port seems to be a sync. Therefore, there must be some way of switching this off using a MOTU driver. However, I'm not sure how to do this.
I'm trying to use my new 02R mixer as a control surface in Logic. However, Logic cannot learn the command because the sync message (sync port) always interferes with the 'learn' process.
Thank you for your help,
Andrew

Andrew-
I am experiencing the same issue with MOTU MTP AV (usb version). This is interfering with assigning MIDI control features. Did you find a way to mute the SYNC PORT of the MOTU device either using Clockworks or directly in LOGIC? If so, what was your solution? Can anyone else chime in? I looked in the environment and didn't see anything like a PORT MUTE feature. Also, will muting the sync port on the MOTU have any side effects?
Thanks,
Alex

How to stop the auto-start of log reader agent (replication) right after my database is restored?

I have the scenario where the SQL server is restored (after migration).
This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
Thanks in advance - Jebah

Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
any other way to disable the jobs?
Steps I followed
Started with a Working publication and subscription
Disabled the jobs (log reader and distribution agents)
Backed up publisher, subscriber, distribution and msdb
Deleted the publication, subscription, publisher and subscriber
Restored the publisher, subscriber, distribution and msdb
Enabled the jobs and executed sp_replrestart
Observations/Issues
Replication does not work
Replication monitor does not show any error
Jobs are shows as enabled but not started in job monitor
Not able to start/stop the log reader and synchronization manually.
I am not sure if I have missed something while restoring the db.
Thanks in advance

How to stop the changes made for the BP in CRM not to update in R/3

Hello Gurus''
we are in need of help......i have an issue...the issue is
Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
Where as in our case the data is updateing in R/3
Here by requesting you all to help me out how to stop the updaation of some changes which are made in CRM , that should not be in R/3
Point will be given......
Regards
sreeram Raghu

Hello
Thanks for ur reply.........
We have the following business process
We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame customer is replicated in R/3 fro sales.
What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
>publication>All BP(MESG)->Replication object-->Bupa_Main
>Sites-->SQ1_300
If we do this process does the issue will fix or else we need to do soem thing more...
Thanks in advance
Regards
Sreeram Raghu
+91-99 94 94 82 72

How to stop the internal batch session

Hi ,
How to stop the internal batch session, which is triggered from the program.
When I execute the program, there is an batch session, which starts processing in parallel with the program, and causes an error message for the program, so the further process is affected.
I tried finding the session through the Transactions - SM35, SM37. However, I could find any session in my name.
However, when I try thro SM04, I could find an session with the same error message. But I am not able to end the session.
Pleas advise.
Thanks,
cartesian.

Go through transaction SM50. In case you have more than one application server (transaction SM51 will show) you can also use SM66 which will show all running processes on all application servers.
With SM50 you will only see the process running if it is running on the same application server you are logged on to.
Mark the process and use menu 'Program/Session - End Session' or 'Process - End with or without Core'
Hope that helps,
Michael

Can't acess a particular business partner

Hi,
I have a issue,I am not able to acess a particular business partner number in CRM 7.0 web UI,I am tryinh wityh some other Id its working but when i am trying to open its giving me atime out dump.How's that possible?I have checked authorization part I am authorize to see it but when i am opening that it gives me a dump.
Please revert as its a critical issue.

Hi,
First try opening the same BP in backend BP transaction. If it works, then problem could be UI profile authorizations or UI specific enhancements. BP number is of char type, make sure you have given correct number with 00 prefixing.
If backend itself dumps, may be performance issue or look at the dump analysis.
Satish

How to stop the upload process?

Hi,
i had by mistake started the other upload than the required!
How to stop the current upload process,( generally it takes lot of time to upload the data as data is huge )
Thanks,
Ravi

Hi Ravi Kottur
Just follow the things like Sunil suggested check one more just kill the process
manually and goto RSMO and in the Monitor QM status just Amke it red manually
for the load which you want to stop and then go to that particular info provider
Manage and delte the request..
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Learning the thingz is never end process if u stop it will Be a devil if u continue it will be a divine***
> Hi,
>
> i had by mistake started the other upload than the
> required!
>
> How to stop the current upload process,( generally it
> takes lot of time to upload the data as data is huge
> )
>
>
> Thanks,
> Ravi

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to print the row ,column,and particular cell in separate color

how to print the row ,column,and particular cell in separate color IN ALV GRID

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How to change the size of a particular object in the picture?

How to change the size of a particular object in the picture?

You need to select it. Copy that selection to a new layer, and use Free Transform to resize it.
http://www.youtube.com/watch?v=qWpAGmwhllQ
http://www.youtube.com/watch?v=Bi4jJnYLkUA

How to stop the waterflow?

Hi,
I need to make the water coming from the shower, when shower is clicked.
And the water should stop after 5 seconds.
The code is below.
The water is flowing nicely. But I do not manage to stop it.
I added a timer, which starts when the shower is clicked. And should stop the waterflow after 5 seconds have passed.
With the lines
if (stop = true)
     break;
     trace("break");
it looks like the for loop is breaking right from the start, from the first second. But not completely, somehow 1 or 2 drops are flowing.
Without these lines nothing is happening when the time is over (5 seconds from clicking the shower). Water is just flowing.
Can someone help? How to stop the water flowing after 5 seconds and clean of the array and stage from the waterdrops?
Many thanks in advance!
import flash.display.MovieClip;
import flash.events.Event;
import flash.utils.Timer;
import flash.events.TimerEvent;
var WatertropArray: Array = new Array();
var WaterArea01: MovieClip = new WaterArea();
var WaterBorder01: MovieClip = new WaterBorder();
var timer: Timer = new Timer(5000, 1);
var stopp: Boolean;
var i: uint;
Shower.addEventListener(MouseEvent.CLICK, waterFlowStart);
function waterFlowStart(event: MouseEvent): void
                addChild(WaterArea01);
                WaterArea01.x = WaterArea00.x;
                WaterArea01.y = WaterArea00.y;
                WaterArea01.alpha = 0;
                addChild(WaterBorder01);
                WaterBorder01.x = WaterBorder00.x;
                WaterBorder01.y = WaterBorder00.y;
                WaterBorder01.alpha = 0;
                stopp = false;
                timer.addEventListener(TimerEvent.TIMER, waterFlowEnd);
                timer.start();
                addWaterdrops();
                Shower.removeEventListener(MouseEvent.CLICK, waterFlowStart);
function addWaterdrops(): void
                for(var i: uint = 0; i < 100; i++)
                               var waterDrop: MovieClip = new Waterdrop();
                               addChild(waterDrop);
                               waterDrop.x = Math.round(Math.random() * stage.stageWidth / 1.5);
                               waterDrop.y = Math.round(Math.random() * stage.stageHeight / 3);
                               waterDrop.alpha = 0;
                               waterDrop.rotation = -12;
                               WatertropArray.push(waterDrop);
                               trace("waterdrops added");
                               moveWaterdrops();
function moveWaterdrops(): void
                waterDrop00.addEventListener(Event.ENTER_FRAME, waterFlow);
function waterFlow(event: Event): void
                for(var i: uint = 0; i < WatertropArray.length; i++)
                               WatertropArray[i].y += 8;
                               WatertropArray[i].x += 5;
                               //trace(i);
                               if(WatertropArray[i].hitTestObject(WaterArea01))
                                               WatertropArray[i].alpha = Math.random();
                                               WatertropArray[i].scaleX = Math.random();
                                               WatertropArray[i].scaleY = WatertropArray[i].scaleX;
                               if(WatertropArray[i].hitTestObject(WaterBorder01) || WatertropArray[i].x > stage.stageWidth || WatertropArray[i].y > stage.stageHeight / 2)
                                               WatertropArray[i].x = Math.round(Math.random() * stage.stageWidth / 1.5);
                                               WatertropArray[i].y = Math.round(Math.random() * stage.stageHeight / 3);
                                               WatertropArray[i].alpha = 0;
                               if(stopp = true)
                                               break;
                                               trace("break");
function waterFlowEnd(event: TimerEvent): void
                trace("TIME OVER");
                stopp = true;
                stoppTrue();
function stoppTrue(): void
                for(var i: uint = WatertropArray.length; i > WatertropArray.length; i--)
                               remove(i);
function remove(idx: int)
                removeChild(WatertropArray[idx]);
                WatertropArray.splice(idx, 1);
                trace("REMOVED");
                removeChild(waterDrop00);
                trace(i);

thanks again, kglad.
changed the for-loop and it is reaching now the last functions as well.
but there is still a but ... an error message.
function waterFlowEnd(event: TimerEvent): void
trace("TIME OVER");
stopp = true;
stoppTrue();                                                       // line 106
function stoppTrue(): void
for(var i: uint = WatertropArray.length-1; i >= 0; i--)
trace("stoppTrue");
remove(i);                                                         // line 115
function remove(idx: int)
removeChild(WatertropArray[idx]);                   // line 123
WatertropArray.splice(idx, 1);
trace("REMOVED");
//removeChild(waterDrop00);
trace(i);
and the output panel gives the following (tested with 5 water drops, 5 items in array):
TIME OVER
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
REMOVED
0
stoppTrue
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at TitavannisinglisekeelneAS3_fla::MainTimeline/remove()[TitavannisinglisekeelneAS3_fla.Main Timeline::frame1:123]
at TitavannisinglisekeelneAS3_fla::MainTimeline/stoppTrue()[TitavannisinglisekeelneAS3_fla.M ainTimeline::frame1:115]
at TitavannisinglisekeelneAS3_fla::MainTimeline/waterFlowEnd()[TitavannisinglisekeelneAS3_fl a.MainTimeline::frame1:106]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
What is that error message trying to tell me?

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the timing out of web Discoverer Plus

I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus?
Thank you,
Olga

Please check Discoverer configuration guide which tells you which parameter to change in preference file(pref.txt).I think you change the value.

How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Similar Messages

Maybe you are looking for