How to stop the users from changing the Decimal in SAP

How to stop the users from changing User Profile

Hai,
It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
Hope this helps.
Regards,
Yoganand.V

Similar Messages

How to disable other users from changing the status

Hi,
The status entry field can be changed irrespective of ownership in Documents.
I was able to change the status on the document created by other user.
Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
How to disable other users from changing the status?
Regards,
Shashi

This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
Regards,
Pradeepkumar Haragoldavar

How to Restrict the users from changing the Default variant of report.

Hello everybody,
The requirement is to restrict the users to save and overwrite the default layout variant (Layout for higher managenet)set for the report, but at the same time they should be able to change and save the other layouts for which they are having access.
I have written the logic in the program which is working fine for all the scenario when we execute the report. But the logic doesnt work if the user is selecting the layout on the output screen of the report.
for e.g if the user runs the report using the layout varaint for which he is having the authorization then he gets the all 4 options so he then he can select the layout for which he is not authorized and he can overwrite.
i have debugged and check as i have found that after the report output is shown all the layout paramater is controllled by the statndard SAP objects.
Can anyone help me out in this issue.
Thankyou in advance.
*to get the default layout variant.
w_save = 'A'.
if p_vari is initial.
    clear disvariant.
    disvariant-report = sy-repid.
    w_variant = disvariant.
    call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
      exporting
        i_save     = w_save
      changing
        cs_variant = w_variant
      exceptions
        not_found = 2.
    if sy-subrc = 0.
      p_vari = w_variant-variant.
    endif.
endif.
*logic to check user authorization to change the layout setting.
if p_vari = c_layout.
    if not sy-uname is initial.
      select single * from agr_users
              where agr_name = c_role
              and   uname    = sy-uname.
      if sy-subrc = 0.
        w_save = 'A'.
      else.
        w_save = ' '.
      endif.
    endif.
endif.
Regards,
Satish.

Hi Maine,
Thanks for your reply.
As you mentioned for your own program, you can control the parameter "I_SAVE", when calling "REUSE_ALV_GRID_DISPLAY".
so already i have use the same logic and control the parameter through I_SAVE and here i am calling method ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY instead of "REUSE_ALV_GRID_DISPLAY".
and it works fine when we execute the report but the logic doesnt work when the user tries to change and save the layout variant on the output screen of the report.
Regards,
Satish

How can we restrict users from changing the data in HFM.

Hi All,
We have requirement from users where, They don't want the base data being loaded from SAP to HFM via FDM through ERPi to get changed in HFM at <Entity Currency>. They want data to be read only and no body should be able to change neither Grid nor Forms and neither Smart View. If we restrict by Shared services access then again they can't change ownership management value.
Regards,
Sushil

Hi Thanos, Thanks for your reply.
Yes i am aware of the security class, so your suggestion is to use security classes to restrict users? And how can i use the phased submission for the same? I am new to HFM so please bear with me.
I have one more question that my Application is HFM EPMA application. So is it necessary to have Application Administrator to change hierarchy and Deploy the Application from EPMA?
Thanks,
Sushil

Is there a way to prevent users from changing the Advanced, Connection, Settings Tab?

I need to stop network users from changing the proxy settings to avoid the firewall. Is there any way to disable or prevent them from getting to the advanced, connections tab, and changing the settings for the proxy?

You can lock the corresponding prefs, then users won't be able to change the settings.
See http://kb.mozillazine.org/Locking_preferences
See also http://kb.mozillazine.org/about%3Aconfig_entries

How do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards.

How do you stop your kid from changing the plan?

I can't actually call a number? There's none listed on this site. I need to stop my kid from changing the plan from 3 gig to 10 bc I can't afford it and I'm going to end up canceling the service if I can't get help. They shouldn't be able to do this. I e had nothing but problems from the start. First getting a used iPad and used phone out of the 3 and being locked out bc the previous owner had I tunes passwords on the phone and on the iPad. Then I was told I was signing up for the next plan and that wasn't so now I have a crapload of extra charges because I can't get ahold of anyone to try to fix this. I'm so frustrated I could blow up!!!

Put a passcode on the account. That way, he will have to know the passcode to change the plan. If he doesn't know the passcode, he can't change the account.
AT&T customer service is 611 from your cell phone.

Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

Sorry, I don't think so. That would be pretty cool if you could create a property node for a formula node and then enter a formula on the front panel and use it to update the formula. But you can't create a property node for a formula node and the only way of modifying the formula is by typing it into the formula node on the diagram. And you can't modify a diagram of a running VI.
You could create a VI which is only a formula node with the maximum number of inputs and outputs you expect. Have a button on the calling VI to Edit Formula. When the button is pressed, use a VI server to display the front panel on the formula VI, display a dialog box telling the user how to display the diagram of the formula VI, then stop the calling VI. (You can't edit a sub-VI while t
he calling VI is running). The user will then need to rerun the calling VI to use the new formula.
You might be able to do something by calling MatLab or something like that to get an interactive formula window.

Prevent a user from changing the Project ID in P6 EPPM 8.3.7

Does anyone know if there is a Global or Project Security Profile privilege that will prevent a user from changing the Project ID on an existing Project? We are using Primavera P6 EPPM 8.3.7
Thank you,
Eric

Hi,
Below project security profile may help you,
Edit Project Details Except Costs/Financials
Determines whether the profile will enable users to edit fields in General, Dates, Defaults, Resources, and Settings tabs in Project Details. To assign a project baselines, users must also have the "Assign Project Baselines" project privilege assigned to their profile.
Regards,
Marcos

How will I block/restrict the user to change the payment term in FBL5N?

Hi All,
How will I block/restrict the user to change the payment term in FBL5N????
I have tried on following objects:
F_BKPF_BLA
F_BKPF_BUK
F_BKPF_GSB
F_BKPF_KOA
F_IT_ALV
F_KNA1_BED
F_KNA1_BUK
F_LFA1_BUK
S_ALV_LAYO
But, not succeeded.
=>Actually user runs FBL5N, double click on a record then click on Change icon.
=>Change Payment Term.
Please reply ASAP. Point will be awarded.
With Best Regards
Dharmendra

Hi Dharmendra,
Please set an authorization trace in ST01 and then ask the user to execute the transaction and the steps on the same application server as the o ne on which the trace has been set (valid in case we are talking about mutiple application servers for same <SID>). After this is done switch off the trace,list it and fill all the authorization objects. That might give you the perfect idea.
Regards.
Ruchit.

Is there a way the user to change the equation in the formular node from the front panel on the fly, dynamically?

Is there a way the user to change the equation in the formular node from the front panel on the fly, dynamically?

Try the Parser VIs (also known as LV Mathematics VIs, or simply GMath VIs) located under the Analyze>>Mathematics palette (not in the Base package). You might want to start with the "Eval Formual Node.vi" located in the Analyze>>Mathematics>>Formula palette. There are many differences between these G-based, dynamic formula VIs and the LabVIEW formula node, but these VIs often prove quite useful when your formula changes on the fly. For more detail on the differences, see the LabVIEW Help file (Cntrl-Shift-? from within LabVIEW) under the topic "Mathematics VIs, parser differences with Formula Node".

How to restrict the user to change the project structure but not the documents?

Hi,
I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
Thanks,
Rutvik Uapdhyay.

Hi Rutvik,
Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
role - SAP_SOLAR01_ALL
this take care of objects in Solar01 like tab access etc
role -SAP_SOL_KW_ALL
this takes care of entire documentation within solman
hope this helps
Regards
Prakhar

How to secure the users from deleting the work items

Hi all,
I have a question like this.........whether we could secure the users from deleting the work items by someone in the Project and also assigning a specific user to allow them to delete the idoc.
Please help me on this as this is critical.........
Thanks in advance
Chakri

One of t he possible way is, ask the basis team to create users as Service Users and you can determine whether the login user is whether a service or dialog user by using the a bapi BAPI_USER_GET_DETAIL under the exporting parameter logondata with field USRTYP where if the logged in user is Service user then this field will be populated as S if the user is a dialog user then it will be populated as A.
Now in more efficient way of fixing this is get the list of users for whom you donot want to give the authorization of deleting workitems and assign the appropriate role for all the listed users...
for roles and authorizations i hope the basis team is the right team to consult....

Hi All,i am currently working on a flex application that will allow the user to change the language

Hi All,i am currently working on a flex application that will allow the user to change the language within the application from english to Japanese and vice versa. And everything works fine.
I am using flex 4.5
We allow the user to save records with english or japanese texts.
problem
When the user manually enters Japanese text and tries to save it the record defaults back to the default name (which is in english). But if you copy the entered text and paste it and then save it.It works fine.
Any idea , why this is happening?
Please let me know if the question is not clear.
Looks like there was already a bug
https://issues.apache.org/jira/browse/FLEX-28894?page=com.atlassian.jira.plugin.system.iss uetabpanels:all-tabpanel
Not sure why does it say , Resolved .
-KB
Message was edited by: bKartik.b

By Payal integration , you mean paypal button html ? or payment gateway setup etc ? If its a gateway configuration for your site domain then single page for all layout will work , but if you are using button code for all renditions then you would need to create separate pages for all.
Thanks,
Sanjit

Regarding switching the User while changing the SO

Hi Experts,
My requirement is
i have one program to change the SO.
Program running user does have a authorization for changing the SO.
but for this particular program the user should change the SO.
for this requirement before calling the BAPI or BDC we have to change the current user name to
some other user (hard coded user..which is having authorization for changing the SO).
i tried to switch the user like
i created another copy of program and in the first program i used the submit
    SUBMIT (JOBNAME)
           WITH SELECTION-TABLE rspar
           USER 'SUPERUSER'
           VIA JOB jobname NUMBER jobcount
           TO SAP-SPOOL
           SPOOL PARAMETERS print_parameters
           WITHOUT SPOOL DYNPRO
           AND RETURN.
BUT IT IS not WORKING...
Can any body share the ideas about this requirement?

Hi ,
Thanks for ur quick reply.
I tried this method and i passed the new user in the submit statement..but it is not working.
if i pass the different user name to the SUBMIT or JOB_SUBMIT then those are returning the subrc as 8.
i tried this method and it is not working.
Sruthi.

How to stop the users from changing the Decimal in SAP

Similar Messages

Maybe you are looking for