How to stop this multiple entry against same condition type in pricing

My client is using manual condition type for the basic price "ZBPR". Now system allowing multiple entry against this condition type in the pricing screen during order creation i.e in the first line if we put ZBPR 00 , in the second line system allowing to put another value against same ZBPR say for example 2000 & doing all subsequent calculations on the basis of 3000 .which is not at all acceptable by my client .Please suggest how to stop this multiple entry against same condition type

You have to make the condition type as Mandatory and not manual.
If you are entering many condition records of the ZPR0 then the latest entry will be taken for further processing for subtotal rebate and total price.
For all the other entered condition records will have yellow traffic signal which is not active.
you can assign a routine with the help pf your abaper...
In the Transaction VOFM  define a requirement such that
you condition type takes value only one at the time of order entry.
regards,
Amlan Sarkar

Similar Messages

  • How to prevent consecutive entries of same condition type in a sales order

    Hi,
    My client is using manual condition type for the basic price "ZBPR". Now system allowing multiple entry against this condition type in the pricing screen during order creation i.e in the first line if we put Condition Type "ZBPR" and putting some value as amount, then again if I put "ZBPR" as condition type and give some other value as amount then system is allowing this and doing all the subsequent calculation.This is not acceptable by the client.
       The functional person regarding this is saying this can be done by using routine.Can some body tell me which routine should I take for this if that is possible by routine and the required code.Also say if there is other way to solve this.
    Thanks,
    Manas.

    Hi ,
    u can do it thru VOFM(tcode)--->Menu -> Formulas>condition value , but in this case u need to derive the value of this condition type by using ur own logic.
    Re: vofm-routine
    Regards
    prabhu

  • Restrict same condition type in pricing procedure

    Is there a way to restrict the condition type so that there can only be one occurrence of the same condition type in a order item?
    Example:
    System reads condition type ZXXX from system, then a user adds the same condition type on the same order item. I would like the system to then give a error message saying ZXXX can only occur once.
    Kind regards

    Hi,
    As this is manual condition and the user are inputing it by themselves then you won't like to change the way the manual changes are maintained/allowed.
    What you want that is user have given it once then they should not be able to input is again in the same sales order item. For this you should take help of requirement. Preapre logic that before the condition system check if there is existing condition of this type in this sales order item.
    Hope it helps ..

  • Texts between 2 iphones showing up on 3rd iphone not on same phone plan. how to stop this

    2 iphones on same family plan and 3rd on company plan. Texts between 2 family phones showing
    up on 3rd company iPhone. How to stop this?

    Stop using the same Apple ID on the 3rd company iPhone for iMessage.
    Go to Settings > iMessage and remove the Apple ID that is used on the two family phones from the company iPhone

  • Hello, iam using the latest version of firefox, whenever i login into my yahoo mail account i get a stop script error, the details of the error script is mentioned below , please suggest how to stop this : STOP ERROR

    Hello, iam using the latest version of firefox, whenever i login into my yahoo mail account i get a stop script error, the details of the error script is mentioned below , please suggest how to stop this
    the website is www.mail.yahoo.com. i was getting the same STOP script error every now and then in firefox 6 as well

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

    How to stop mail from recovering the same message over and over again to the extent that it has wiped out all start up disk memory?

    You need to find and delete (move to the Trash) the offline mail cache (.offline cache.) It's a hidden folder (files and folders with a preceding dot are hidden) inside the Mail folder (inside IMAP) in your user library. Since it's hidden, in order to see it run the following command in Terminal in Applications>Utilities. Hit return/enter once you have pasted in the command.
    defaults write com.apple.finder AppleShowAllFiles -bool true ; killall Finder
    To reverse this and hide all those hidden files and folders again
    defaults write com.apple.finder AppleShowAllFiles -bool false ; killall Finder
    Leave hidden files/folders enabled until you finish emptying the Trash so you know it's gone.

  • My MacBook Pro switches automatically from a program to finder while working.  Can anyone make suggestions on how to stop this?

    My MacBook Pro will automatically jump from a program (Safari, Excel, etc.) to the Finder window.  Can anyone tell me how to stop this?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I switched my number to my daughters iPhone 4 and she got an iPhone 5.  When I send txt using iMessage, she is getting a copy of the txt on her phone as well. Any idea on how to stop this?

    I switched my number to my daughters iPhone 4 and she got an iPhone 5.  When I send txt using iMessage, she is getting a copy of the txt on her phone as well. Any idea on how to stop this?

    This occurs when two people share the same apple id for imessage.
    settings - message - send & receive - uncheck or remove the apple id.
    do the same for start a new conversation.

  • How to Stop SSIS package if Already same running in System

    Hi Team
    I am facing a problem regarding to avoid re-running a SSIS package.
    I am running a package through BIDS and Suppose by Mistake i have again ran a same package though SQL job or Vice versa. So How to stop this duplicity and Stop the second attempt?
    Please help me on this.
    Abhishek Parihar BI Consultant (Please mark the post as answered if it answers your question)

    Hi Abhishek
    I am confused,  you said "and Stop the second attempt?" but above  you are saying "any
    chance of avoiding to stop a package if it is already running." Please explain a little bit the logic behind the
    scene.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • In my macbook pro when composing email it coping into thrash as well so how to stop this ?

    in my macbook pro when composing email it coping into thrash as well so how to stop this ?

    You may have a Bad fan. Make an appointment and take it to the genius bar for an evaluation. It's free, in warranty or out.

  • How can I print multiple copies of same photo onto one page on iPhoto 9.5.1?

    How can I print multiple copies of same photo onto one page on iPhoto 9.5.1? I was able to do it on the old iPhoto, but can't seem to be able to do it on the new iPhoto. Grrr...

    Photos does the same thing.... Only workaround I can come up with is to create a template in Pages and copy & paste.

  • My Mail app opens unprompted everytime i reboot or awake my macbook pro from sleep.  This was not an issue until i shut down my laptop for the first time in a while 2 days ago.  ANy ideas how to stop this?

    I recently shut down my MacBook Pro for the first time in a long time.  SInce then, everytime i reboot or awake my laptop from sleep, the Mail app opens unprompted causing my computer to slow down incredibly, and some apps to freeze.  I have no idea how to stop this or why it even started doing this.  Any ideas on how to get it to stop? Thanks!

    I have this problem too with my Macbook Air. Mail opens automatically every time my laptop sleeps. I actually just asked about this in my own thread. However, it is not causing my apps to freeze.

  • At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

    At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
    == This happened ==
    Every time Firefox opened
    == Several weeks ago.

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the ''updates'' and ''updates\0'' folder:
    Vista/Windows7:
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
    C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
    %LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

  • I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • My ip5 auto restarting itself lately, how to stop this problem?

    My ip5 auto restarting itself lately, how to stop this problem?

    It cannot just change itself.  If it has not been changed by someone using the phone, then the only other thing I can think of is that the phone is on a corporate Exchange account, and the passcode has been changed by the administrator.  If that is not the answer then the phone will have to be restored.

Maybe you are looking for