How to stop tumbler from generating thumbnailers for pdf file

I'm using tumbler for thunar to generate thumbnailers, which works quite well. But I don't want it to generate pdf thumbnailers, since they are not in the same size. I've searched much, but not found any config file for tumbler. Any ideas? Thanks.

Hi Aashi,
So here is what I understood from you issue.
1. You are creating a work item and sending a notification to the WI recipient about the task which is available in his inbox.
2. Upon checking the mail the agent might open the WI which is in ready state and with taking any action on it he might close or click on back button.( So this action makes the work item status change from READY to INPROCESS state).
After this I am not sure what is that making you to create another worktiem.
what I would like to suggest is you can check the status of the work item from SWWWIHEAD table based on the work item ID.
Next what I would suggest is to tweak you workflow design to include Deadline monitoring LATEST END. and it should be modeled. in this case what you can do is you can just set the previous work item to Obsolete and create a new work item.
The other possibility to fix your issue could be make use of the PORCESS control step after validating the state and of work item and set the work item to obsolete or logically deleted. so this makes the old work item cleared and the new work item appears in the users inbox.
Regards,
Pavan

Similar Messages

How to stop Acrobat from automatically opening created PDF?

This may be a question asked elsewhere, but my search didn't find it.
How can I stop Acrobat from automatically opening every PDF that I create in Adobe Reader? I'm using using Acrobat 6.0 Pro.
Thanks for your help with this major annoyance!
Cheers.

Adobe does not recommend Reader and Acrobat both be installed. They have strange interactions and can cause problems. If you do not have problems, you are lucky. Part of the problem is that they leave a part resident to enable quick opening. If it works for you, then fine. If you have some problems, you at least have an idea of what a prime candidate is for the error.

XMLEncoder - how to stop it from using NaN for int's

I am trying to invoke a webservice. I used the Flex Builder 3
service code generator. I have an object "Person" which has three
fields: {id:int, firstName:String, lastName:String}
I have a case where I invoke a method on a webservice that
takes a person object. the person object in this case should only
have a first and last name defined (no id, yet). I stepped through
the flex source code to see what happens and basically when it
encodes the Person object it gets to the "id" field whose value is
NaN (b/c I never set it). The encoder eventually just decides that
(NaN >= integer.min value) and passes it along so it gets into
my SOAP message as <id>NaN</id>. This causes problems
at the web service (java) side b/c it doesn't know how to
unmarshall "NaN".
So...any suggestions on how to prevent it from sending
<id>NaN</id>. maybe even just <id /> would be
ok.

Moving the iOS device backup location
Open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up, or with Start > Run on older Windows.
To move the current backup folder from C: to D: (for example) type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your preferred drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
If you have Windows XP then you'll need a third-party tool such as Junction to link the two locations together instead of the MkLink command. The source folder is C:\Documents and Settings\<User>\Application Data\Apple Computer\MobileSync\Backup
I'm pretty sure the same technique will work with the iPod software download folder, although it is worth noting that it does not work inside the iTunes Media folder. At last time of testing if you attempt to redirect sections of the media folder and iTunes writes to a redirected location it will erase the link and replace it with a regular folder.
tt2

How do I Make Acrobat the default for PDF Files

I have been using Acrobat 6 in my Mac for quite a few years. And I would like to have Acrobat open automatically when I open a PDF file but Adobe Reader opens.
How do I make Acrobat the default program when opening a PDF file?

See this topic: http://forums.adobe.com/thread/833320

How to make Preview the default reader for pdf files online?

Hi everyone,
Many product manufacturers put their product's broucher in pdf form online. I've tried the screen shot capture method for saved pdf files but when the file won't even open online, how do I get to even capture a screen shot in the first place? Is the problem in Safari 6? Many thanks in advance.

Hi Anthony,
So, you're instincts were correct - it is Safari.....
I use Firefox as my browser (I'm not a big fan of Safari or on Windows, of Explorer). When I clicked on your brochure in Firefox, it comes up with a little window asking me what I want to do with the file - and with the "Open With" Preview" button checked.
When I do the same with Safari, it opens a new Safari window, displaying it online, but not downloading it.
So, don't know if you want to download Firefox, but did want to let you know that's why it was working differently for me!
Good luck with this - hope you are able to get it to work out for you!
Cheers,
GB

How to stop user from entering value for already existing data

Hi ,
We have a situation , where we need to give user a template for entering the data and then send it to the database. But we want that if user has already entered the value for a combination, then he should not be allowed to select the same combination again in that template.
In other words , there should be write access but not update access.
So I have two questions related to it:
1. How to build report with giving user , the drop-down list of available members under each dimensions. (I know that we can provide list by writing all of them in excel and then using those values in drop-down)
2. How to restrict the user for selecting the combination which has already been selected.
Need your suggestion
Thanks
Sanjay

Hi Sanjay,
for your first question...
you can build an EVDRE in a hidden area/sheet to display all values of a desired dimension in rows. Set Option SuppressDataCol to 'Y'. Also maintain MemberSet options to display only the values you need.
Now you can reference your DD-box to the key- or description range.
With some VBA-code you can refresh this EVDRE on Workbook_Open and also set the range (attribute ListFillRange?) of you DD-box dynamically to the RowKeyRange.
Hope, it helps.
Regards
Steve

How to stop headphones from becoming 'Input' for sound

Hi,
I hope somebody here can help me with this problem.
When I connect my headphones to my Macbook Pro via the jack, the Sound Settings automatically change so that the headphones are not only the Output but the Input too - so if I record something whilst the headphones are connected, rather than the Internal Microphone being the default recording device, the headphones record instead!
The problem is that I'd much rather use the Internal Microphone as the Input when the headphones are connected as the Output. But for some reason there's no option in System Preferences to stop the headphones automatically becoming the Input and to use the Internal Mic for this instead. This seems bizarre to me, as my previous headphones were purely Output by default.
Is there any way I can change this? Set the headphones as Output only, whilst using the Internal Microphone as Input?
There must be some kind of Advanced Settings somewhere!
I'd be very grateful for any suggestions!
Cheers,
Jay
p.s. Below is a screenshot of my System Settings > Sound after I've plugged the headphones in. As you can see, Input has changed to 'headphones with in-built external mic" and there appears to be no way to change it!

Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

I have itunes set up to sync with my Ipod Touch and my Ipad. As of today, it keeps looking for an iPhone to sync with and give me an error message. I don't have an iPhone and don't know how to stop it from popping open with this error message.

I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

How to stop Firefox from checking for add-on compatibility every time it opens?

How to stop Firefox from checking for add-on compatibility every time it opens?

That can be a problem with the compatibility.ini file in the Firefox profile folder.
Try to rename (or delete) the compatibility.ini file in the Firefox profile folder to see if that helps.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can also check for problems with preferences.
Delete possible user.js and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

How do I stop Imovie from automatically searching for videos when I open up program. I can't do anything when this happens. I checked my pref and it's not set to automatically do this.

How do I stop Imovie from automatically searching for videos when I open the program. It will not allow me to do anything and I cannot start a new session.

How can I stop iCal from popping up for no reason ?

Since today, my iCal is popping up as an opened application for no reason and I've had, up to now, to quit it 3 times. It's really annoying. I don't even use iCal anymore since I have BusyCal, which is a better version of iCal, but a totally different application.
How can I stop iCal from popping up for no reason like that. Please, anyone, help me.

What exactly is triggering this, are you clicking on some kind of file?

When I open itunes on my laptop, how do i stop itunes from automatically prompting for my apple account info?

When I open itunes on my laptop, and I have connected my iPod Touch, how do I stop itunes from automatically prompting for my apple account info? I'm usually not intending to make any purchases at that time, so do they need to know my account info?

Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941)

Programmatically generate password for pdf with data from database

Good day everyone,
I would like to know is it possible to programmatically generate passwords for pdf??
The main idea is to enable an automated process of pdf acquiring individualised password from a database (Excel, Access, you name it) and finally sending the pdf to individual recipient. Can I use javascript for this? And if yes, how?? If not, pls do advice me on the appropriate steps.
Background (for clarity's sake):
Currently I am working on developing an automated process for the sending customised, password encrypted payslip to about 80 staff. The entire procedure is pretty much summarized as below:
mail merg (UBS output in) excel to words -> convert words to pdf -> programmatically password encrypt the pdf -> email to individual recipients.
Well my current status is - I am quite done with the batch mail merge and convertion part. And batch proccessing of password encryption is not a problem, but the idea is to allow acrobat to retrieve password automatically from a database and not key-in each and every password manually. The batch email for now is another problem but for now I have to work stepwise. (Any ideas on how to do it would equally be valued though! =D)
System and software using:
Windows XP and 7 Professional
Microsoft Office Proffesional 2010
Adobe Acrobat X Pro
I would be really grateful for any relevant replies to my question and any additional thoughts or ideas are welcome!!
I would to thank any potential saviour in advance!
Thank you for helping!

Basically I need to automate the password generation from database extract
e.g. Excel database with StaffID, StaffName, PayMonth, etc. Then when the pdf is created, its password would be <StaffID>_<PayMonth> which is extracted from excel.
Is it possible for this to happen?? I dont mine using Javascript, I'll just have to learn it.
Or how about recommending a program which does that??
Whichever is fine as long there's a solution!
Thanks!

How do I stop aperture from reprocessing my my raw files on import

how do I stop aperture from reprocessing my my raw files on import

Here's the thing: You didn't shoot in B&W and the Raw is in colour.
Your camera shoots everything in colour because that's what the sensor in the camera is - RGB. For B&W shots what happens is that the camera adds a display tag to the shot - and this is written to the Jpeg you shoot, and so it displays.
But a Raw is a sensor dump from the camera. This is all the data that the camera has, and all of that is in colour, so it shows in colour on Aperture.
Convert to B&W in Aperture or shoot Jpeg.
Regards
TD

How to stop iPhoto from opening each time I add a photo using Yosemite

How to stop iPhoto from opening each time I add a photo using Yosemite

Add image to iPhoto Library
From where. I don't think you can keep it mininmized when importing because if it runs into a duplicate it will present a warning window for you to make a decision in. Therefore, it will always be open when importing.
You can send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.

How to stop tumbler from generating thumbnailers for pdf file

Similar Messages

Maybe you are looking for