How to stop user profiles clean-up job from deleting Active users.

Hi,
Somehow bunch of active users profile are marked for deletions and their managers have received email saying it will be deleted in X days.
I know if we disable My Site Clean Up Job, it will not delete any profiles. But I want that job to continue running and stop active user profiles from getting deleted.
How do I proceed here...
Thanks,
Abhilash

Hi Abhilash,
I understand SharePoint 2010 MySite clean up timer job is deleting active user profiles.
Firstly, I need to confirm with you that the timer job will work on below two situations:
1.When you use the web UI in Central Administration to delete a user profile
2.When a user who was included in a previous user profile import is no longer included in the import. 
The second point bears a little more explanation, please refer to How Is A User Profile Deleted?
in the article below:
http://blogs.msdn.com/b/kaevans/archive/2012/06/25/top-recommendations-for-managing-the-my-site-cleanup-timer-job.aspx
Let me know if you situation is not included in the above two.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • The User Profile Service service failed the logon. the user profile cannot be loaded

    I have been runnung Vista home premium with no problems for some time. Now I want to add a second user. Each time I create a new user and then try to logon as the new user, I get this message:
    The User Profile Service service failed the logon. the user profile cannot be loaded.
    Other answers I have found relate to corrupted administrator accounts but that is not the problem I have.
    What can I do to enable the use of other users on this computer?

    Hi,
    Thank you for posting in Microsoft TechNet Forum.
    First of all, for further troubleshooting, may I ask some questions:
    1.     How did you create a new user? Is it a account belonged to administrator group or standard user group?
    2.     Does this issue occur with the current user? Do you receive any error code?
    Based on my research, you can visit the following Microsoft KB on User Profile Service (ProfSvc) issue.
    Error message when you log on to a Windows Vista-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded"
    http://support.microsoft.com/kb/947215
    Meanwhile, to share an article on the Error "The User Profile Service failed the logon. User profile cannot be loaded."
    http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
    Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Hope this helps. Thanks.

  • How to stop the Debug-master-Beacon command from console

    Q: How to stop the Debug-master-Beacon command from console
    A:  
    -"Debug-master-beacon" This command is basically used to see the  master beacon  sent and the received .
    -This command will  help in figuring out master discover issues.
     -You can run this command only from the console of the Ap.
    - Once you run the command you can stop it only by typing the command
    "No debug-master-beacon"
    Sample command below

    Hi Shravanthi,
    How the Substitution will work for stopping the user from changing the Depreciation key in asset master data. Can you please ellaborate in details.
    Regards,
    BABA

  • How Can I Run a SQL Loader Job from Schedular

    How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.

    Depends on a couple of factors.
    If you are on a UNIX platform, you can create a shell script and schedule it with cron.
    If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
    Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference.

  • How to stop a while loop in LabVIEW from a C program

    How to stop  a while loop in LabVIEW from a C code

    hi
    I think by creating dll you can stop the while loop from your C program.For that you just create dll (Dynamic Link Library) for the VI which has that while loop.
         Anyway can u please explain ur requirement clearly.

  • User Profile Service failed the sign-in. User profile cannot be loaded - For any new accounts created

    I'm sharing this issue we encountered earlier today so that others might benefit from what we discovered.
    We're using Win8.1 Ent and on two of the systems, any accounts created encounter the following message upon attempted login (i.e. login fails):
     "User Profile Service failed the sign-in. User profile cannot be loaded"
    The event viewer shows this:
    Windows cannot copy file
    \\?\C:\Users\Default\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm to location
    \\?\C:\Users\TEMP\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Solution which worked for us
    In our instance either setting the appropriate permissions on the affected file, or deleting the file resolved it.

    I had a similar problem, and raised a Premier case, which is mentioned here:
    http://blogs.msdn.com/b/asiatech/archive/2014/01/30/new-user-gets-event-1509-after-deploying-ie9-10-11-packaged-by-ieak.aspx
    It seems this issue with SQM/CEIP creating a poorly ACE'd SQM file has been around for a very long time, with many causes being the installation of Internet Explorer (as was my case, of deploy IE10 to Win7), but other reasons also occur (as in your case
    with VS).
    It seems to me that this is a defect in the SQM/CEIP component, but the issue does not consistently occur is all scenarios, which appears to be an excuse to leave the defect uncorrected, so we have to implement ugly workarounds.. :(
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to stop non statistical condition type value from updating total amount

    Gurus,
    Can any body explain me how to do following setting,
    How to Stop non statistical condition type value from updating Total Amount
    Regards,
    Sai

    Dear Sai,
    You need to make that condition type as Statistical one
    Go to SPRO - Sales and Distr. - Basic Functions - Pricing - Define and Assign Pricing Proc - Maintain Pricing Proc - Control Date
    Select the proc. - select the condition type and activate the  check box Statistical
    This will show the amount of the condition but will not consider for the net value calculation
    Hope this will help you
    regards,
    Sagar

  • I have this message when i try to log onto my home pc "The User Profile Service, service failed the logon. User profile cannot be loaded." can I recover my music and photos from iCloud from another user account?

    I get this message when i try to log onto my home pc account "The user Profile Service, service failed the lofon. User profile cannot be loaded" can I recover my data from another/new user account from my iCloud account??

    "Jesse.soto1" wrote in message news:1e164fdf-7370-45c0-9bc7-3b58278121c3...
    Good Afternoon Everyone,
    I am not technologically savvy as a result I'm having trouble understanding previous posts on "The user profile service service failed to logon user profile cannot be loaded." Lingo on domain reset etc, not sure that this pertains to solving my  issue
    ... I cant even get pass the sign in page let alone make changes. I am having this issue with my Dell Studio XPS 1340 with Windows 7 Home Premium. If anyone can provide their two cents I would greatly appreciate.
    Very Respectfully,
    Jesse
    Home Premium cannot logon to a Domain, nor can it be set to try it.
    when you get the logon window, try hitting the three-finger salute )Ctrl+Alt+Del) twice – it may bring up the old-style login window – enter your credentials there.
    Noel Paton | Nil Carborundum Illegitemi |
    CrashFixPC | The Three-toed Sloth

  • Date modified of user profile can be considered as date the user last accessed the server?

    Hi,
    I have a terminal server with large number of old profiles.what is the Microsoft way to clear these?
    Is the last modified date of user profile can be considered as date the user last logged in to this server?
    Regards,
    Arun
    Best Regards, Arun http://whynotsql.blogspot.com/

    Hi Arun,
    For deleting old profiles please test the following group policy setting using gpedit.msc:
    Computer Configuration\ Administrative Templates\ System\ User Profiles\
    Delete user profiles older than a specified number of days on system restart     Enabled
    Delete user profiles older than (days)     30
    It is applicable to Windows Server 2008 and later.  You may need the following hotfix if you are running Server 2008 R2 (no SP1):
    http://support.microsoft.com/kb/983544
    Thanks.
    -TP

  • How do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

    how do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

    The operating system may be the same but the Numbers applications are likely different.  You need to get the apps in sync.  Unfortunately, the Numbers (and Pages as well) saga is pretty confusing (and frustrating).  Here's some info from the iWork resident version expert (PeterBreis0807):
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs.

  • The User Profile Service service failed the logon. User Profile cannot be loaded. (while using Vista)

    Hello - I'm receiving the error above when trying to logon on to my computer.  I've tried some of the fixes on this site and others and none of them seem to work b/c I get to a certain point and I don't have files.  Examples are below:
    1).  I don't have another account with administrator priv (or if I do, I don't know how to get there).
    2). Youtube video offers a fix by making registry edits, but with Windows 7 and once he gets to Windows NT file, current version, profile list  - I don't have any of those options.
    3). Another fix also suggests doing a reg edit, but I don't have the S-1-5 files with the really long numbers - I only have S-1-5 -18 and S-1-5-19.
    Any suggestions on fixes within in Vista would be greatly appreciated.
    Thank you!

    Hi,
    I know this thread is idle for some time, but I want to share the following link here, hope it can be helpful
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215
    Yolanda Zhu
    TechNet Community Support

  • "User Profile Service service failed the logon. User profile cannot be loaded."

    I just spend a long time fighting this problem and wanted to share how I fixed.
    I was seeing this error on a Win7 standalone system (local profiles, not logging into a domain).  I had two profiles on it that worked fine, but if I tried to create a new profile, I would be unable to logon to it and would get the "User Profile Service
    failed the logon" message.
    I tried the steps in KB http://support.microsoft.com/kb/947215 but they did not fix the problem.
    After looking through the event logs, I found the following 1509 error in the Application log:
    Windows cannot copy file
    \\?\C:\Users\Default\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup0.sqm to location
    \\?\C:\Users\TEMP\AppData\Local\Microsoft\Windows\Temporary Internet Files\SQM\iesqmdata_setup0.sqm. This error may be caused by network problems or insufficient security rights.
     DETAIL - Access is denied.
    After binging iesqmdata_setup0.sqm I ran across this article:
    http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/e87aafae-c3aa-48df-b188-0ba161fcb9c7
    The suggestion there:
    "I suggest you check the Advanced Security Settings for the C:\Users\Default folder. Ensure you check the box "Replace all child object permission with inheritable permissions from this object"."
    Fixed this problem for me.  I am now able to logon with the newly created accounts just fine.
    Hopefully this will help others as well!

    Hi,
    Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
    Regards,
    Leo  
    Huang
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Leo Huang
    TechNet Community Support

  • How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

    As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save.  I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was.  I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink."  That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box.  But as soon as I save (command S), the text box reverts to a hyperlink. 
    If I don't click save and move around the pages, it does not revert to a hyperlink.  It only reverts to a hyperlink when the file is saved.  Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
    The website page is: http://www.usronline.net/USR/VedicResearch.html.  If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file.  This should not be, but I can't get this hyperlink to go away for good.
    Many thanks in advance.
    Vishnupriya

    Please pardon the reply delay--a big project deadline had to be met.  Now back to this work:
    Yes, the text in the oval object had a drop shadow (the oval object itself did not).  I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object.  I deleted the text and then the image file icon disappeared.  But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again.  I deleted the oval object entirely and simply typed the text inside the main text box itself.  The image file icon that was attached to that oval object is gone (along with the oval object).
    Still the image file icon is attached to the main text box, though.  I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink. 
    Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one).  Still in the new text box with the pasted text, the image file icon shows in the upper right corner. 
    I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
    I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
    The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond."  I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
    If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
    Thank you.

  • How to hide some folders in a woprkspace from some external users?

    Hi
    We manage a workspace that has both Internal external users. We have a requirements in a way that external users can only see some folders they have access to. What is the best way to accomplish.
    I reviewed an article in "How to" section which describes how to use ACLS to hide some folders from certain users (https://beehiveonline.oracle.com/External_06_howto.html).
    But this process is cumbersome as we need to go to exh folder and revoke permission for selected users. And also if we add any new folders to the workspace that folder will default be accessible to the external users also. We want by default any new folders do not have access to this group of users except the ones we provide access to.
    How can we do it?
    Regards
    Ram Uppu

    Ram,
    We have a new process which is much more easily used - the https://beehiveonline.oracle.com/External_06_howto.html page has been upfdated to show the new process.
    phil

  • How do I get firefox to up date from a standard user account....or at least tell me to log on as administrator and update?

    I do almost all my work from a standard user account. Firefox neither automatically updates (as I set it to) or informs me an update is available.
    How do I get Firefox to update automatically when I am logged on as a standard user....or at least tell me to switch to admin account and update?

    Let me add a note to the developers: WE ARE ALL NOT ADMINISTRATORS!
    Even on our own personal computers.
    I claim that administrator accounts are for administering, or developing; not using. I wouldn't be an administrator for longer than is necessary than walk down the centre of a highway with my eyes closed.
    I'll repeat: Mozilla really should prevent the 'Update' button showing to an ordinary user if it's not going to be possible to use it.

Maybe you are looking for